FormSF1449_Solicitation Form.pdf

RFQ IFB RFP

WOMEN-OWNED SMALL BUSINESS

(WOSB) ELIGIBLE UNDER THE WOMEN-OWNED

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

1. REQUISITION NUMBER PAGE OF

2. CONTRACT NO. 3. AWARD/EFFECTIVE

DATE

4. ORDER NUMBER 5. SOLICITATION NUMBER 6. SOLICITATION ISSUE

DATE

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME b. TELEPHONE NUMBER (No collect calls)

8. OFFER DUE DATE/

LOCAL TIME

9. ISSUED BY

13b. RATING

14. METHOD OF SOLICITATION

CODE

15. DELIVER TO 16. ADMINISTERED BY CODE

18a. PAYMENT WILL BE MADE BY CODEFACILITY

CODE

CODE

TELEPHONE NO.

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED

SEE ADDENDUM

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Govt. Use Only)

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED

29. AWARD OF CONTRACT: REF.

DATED . YOUR OFFER ON SOLICITATION

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR

30b. NAME AND TITLE OF SIGNER (Type or print) 30c. DATE SIGNED

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

31b. NAME OF CONTRACTING OFFICER (Type or print) 31c. DATE SIGNED

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA - FAR (48 CFR) 53.212

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

OFFER

13a. THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

12. DISCOUNT TERMS

ARE ARE NOT ATTACHED

ARE ARE NOT ATTACHED

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

17a CONTRACTOR/

OFFEROR.

CODE

8 (A)

SIZE STANDARD:

NAICS:

% FOR:SET ASIDE:UNRESTRICTED OR

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

HUBZONE SMALL

BUSINESS

SMALL BUSINESS

10. THIS ACQUISITION IS

EDWOSB

SMALL BUSINESS PROGRAM

STANDARD FORM 1449 (REV. 2/2012) BACK

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED:

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

40. PAID BY

32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f. TELPHONE NUMBER OF AUTHORZED GOVERNMENT REPRESENTATIVE

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

33. SHIP NUMBER 34. VOUCHER NUMBER 35. AMOUNT VERIFIED

CORRECT FOR

PARTIAL FINAL

37. CHECK NUMBER

38. S/R ACCOUNT NO. 39. S/R VOUCHER NUMBER

36. PAYMENT

COMPLETE PARTIAL FINAL

SCHEDULE Continued

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 REPLACEMENT OF AIR CONDITIONING SYSTEM

ON A CONTAINERIZED HYPERBARIC CHAMBER

SYSTEM

- SERVICES, NON-PERSONAL

- CONTRACTOR SHALL PROVIDE LABOR,

MATERIALS, AND EQUIPMENT (UNLESS PROVIDED

HEREIN) NECESSARY TO REPLACE AN AIR

CONDITIONING SYSTEM ON A CONTAINERIZED

HYPERBARIC CHAMBER SYSTEM

- SERVICES SHALL BE PERFORMED IN

DIRECT ACCORDANCE WITH THE ATTACHED

SPECIFICATIONS AND STATEMENT OF WORK

1.00 EA

PAGE 3 OF 101 1305M221QNMAN0136

Table of Contents

INSTRUCTIONS TO OFFERORS

EVALUATION CRITERIA UTILIZING SAP

STATEMENT OF WORK & SPECIFICATIONS

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

52.252-6AUTHORIZED DEVIATIONS IN CLAUSES (NOV 2020)

52.204-7 SYSTEM FOR AWARD MANAGEMENT (OCT 2018)

52.204-13SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (OCT 2018)

52.204-16COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING (AUG 2020)

52.204-18COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE (AUG 2020)

52.204-24REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR EQUIPMENT

(OCT 2020)

52.204-26COVERED TELECOMMUNICATIONS EQUIPMENT OR SERVICES--REPRESENTATION (OCT 2020)

52.212-1INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS (JUN 2020)

52.212-3OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (FEB 2021)

52.212-4 CONTRACT TERMS AND CONDITIONS--COMMERCIAL ITEMS (OCT 2018)

52.212-5CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL

ITEMS (JAN 2021)

52.237-1 SITE VISIT (APR 1984)

52.237-2 PROTECTION OF GOVERNMENT BUILDINGS, EQUIPMENT, AND VEGETATION (APR 1984)

52.247-34 F.O.B. DESTINATION (NOV 1991)

1352.201-70 CONTRACTING OFFICER´s AUTHORITY (APR 2010)

1352.209-73 COMPLIANCE WITH THE LAWS (APR 2010)

1352.209-74 ORGANIZATIONAL CONFLICT OF INTEREST (APR 2010)

1352.233-70 AGENCY PROTESTS (APR 2010)

1352.233-71 GAO AND COURT OF FEDERAL CLAIMS PROTESTS (APR 2010)

1352.237-71 SECURITY PROCESSING REQUIREMENTS - LOW RISK CONTRACTS (APR 2010)

1352.237-75 KEY PERSONNEL (APR 2010)

1352.246-70 PLACE OF ACCEPTANCE (APR 2010)

1330-52.222-70NOAA SEXUAL ASSAULT AND SEXUAL HARASSMENT PREVENTION AND RESPONSE POLICY (MAY 2018)... 81

1330-52.237-70CONTRACTOR COMMUNICATIONS

1330-52.237-71NOAA GOVERNMENT-CONTRACTOR RELATIONS - NON-PERSONAL SERVICES CONTRACT (SEPT 2017)

1330-52.237-72CONTRACTOR ACCESS TO NOAA FACILITIES (SEPT 2017)

1330-52.243-70REQUESTS FOR EQUITABLE ADJUSTMENT (OCT 2017)

1330-52.270-304NOAA ACQUISITION AND GRANTS OFFICE OMBUDSMAN (OCT 2016)

SUBMITTAL OF INVOICES

DEVIATION: ACCELERATED PYMTS TO SB SUBCONTRACTORS

WAGE DETERMINATION

PAGE 4 OF 101 1305M221QNMAN0136

CLAUSES

INSTRUCTIONS TO OFFERORS

PAGE 5 OF 101 1305M221QNMAN0136

INSTRUCTIONS TO OFFERORS

NAICS: 238220, Plumbing, Heating, and Air-Conditioning Contractors

Quotes should be emailed to bryton.curtis@noaa.gov. Faxed quotes will not be accepted.

BASIS FOR AWARD:

The government intends to award as a firm-fixed price requirement to the responsive responsible quoter(s) providing the best value to the government, considering both price and non-price factors. The award will be made on the basis of the lowest evaluated price of proposals meeting or exceeding the acceptability standards for non-cost factors. This requirement is unrestricted and is open to receiving quotes from small and other than small businesses.

The Government reserves the right to make a comparative evaluation of quotes in determining best value in accordance with the FAR 13.103-2(b)(3)

SYSTEM FOR AWARD MANAGEMENT (SAM):

In accordance with FAR 52.212-1(k), unless exempted by an addendum to this solicitation, by submission of an offer, the offeror acknowledges the requirement that a prospective awardee shall have an active registration in the SAM database at the time quotes are submitted, during performance and through final payment of any contract resulting from this solicitation. Offerors may obtain information on registration and annual confirmation requirements via the SAM database accessed through https://www.acquisition.gov under Acquisition Systems or www.sam.gov.

SITE VISIT

A site visit is encouraged. Quoters are encouraged to inspect the site where services are to be performed and to satisfy themselves as to all general and local conditions that may affect the cost of the performance of the contract, to the extent such information is reasonably obtainable. In no event will a failure to inspect the site constitute grounds for a claim after award of the contract. Please contact the government point of contact, Kerry Reardon (808-725-5465; Kerry.Reardon@noaa.gov) to schedule a site visit. Please allow for a 24 hour notification when trying to schedule a site visit.

SUBMISSION OF QUOTES:

Quotes must be submitted by electronic means for consideration of award. Electronic quotes may be transmitted by email to bryton.curtis@noaa.gov. It is the Offeror’s responsibility to ensure their electronic offer has been received. If you have any questions regarding the quoting process please contact Bryton Curtis at 816-426-2304.

The following information is to be returned:

PAGE 6 OF 101 1305M221QNMAN0136

1. Page 1 (complete blocks 17a, 30a, 30b and 30c)

2. Pages 3 (fill in your quote/prices)

3. Your DUN & Bradstreet (D&B) D-U-N-S Number. If you do not have a DUNS Number, you may request one at http://fedgov.dnb.com/webform. There is no charge for getting a DUNS Number.

4. Contractor representations and certifications shall be completed in the System for Award Management (www.sam.gov). Contractors shall provide a statement that they either are or are not registered and active in SAM.

5. Your response to CAR Clause 1352.209-74(c), Organizational Conflict of Interest – Contractors shall provide a statement that they either do or do not have conflict of interest.

6. As requested in CAR Clause 1352.213-70, Provide your response to the factors used to evaluate quotes.

7. As requested in CAR Clause 1352.27-75, Provide your key personnel, which includes Name, Title and Telephone Number

8. An email address and telephone number where you can be reached for future correspondence.

Contractors who do not respond to items 1 through 8 may be considered non-compliant with the requirements of the solicitation and no further consideration shall be given for award.

QUESTIONS:

All questions must be submitted via email to the Contracting Specialist, Bryton Curtis at email Bryton.curtis@noaa.gov. The government will make every effort to reply to the questions submitted in a timely manner.

EVALUATION CRITERIA UTILIZING SAP

PAGE 7 OF 101 1305M221QNMAN0136

1352.213-70

EVALUATION UTILIZING SIMPLIFIED ACQUISITION PROCEDURES

The Government will issue a purchase order resulting from this Request for Quotation (RFQ) to the responsive responsible offeror whose quotation results in the best value to the Government, considering both price and non-price factors. Evaluation and Award will be made on the basis of the lowest evaluated price of quotes meeting or exceeding the acceptability standards for non-cost factors.

The following factors will be used to evaluate quotations:

1. SPECIFICATIONS & ADHERENCE TO STATEMENT OF WORK

The offeror’s ability to meet all requirements listed in the specifications/statement of work will be evaluated to determine as appropriate, successful conformance to the contract requirements.

NOAA, in conjunction with the NOAA Diving Center, will evaluate the offeror’s specification information. Offerors who fail to meet the requirements shall be considered noncompliant to the solicitation.

2. PRICE

The Government will evaluate offers for award purposes by adding the total price for the basic requirement. NOAA will evaluate the quoter’s proposed price for fairness and reasonableness in relation to the RFQ’s requirements.

The Government reserves the right not to award a contract.

All offers received will be evaluated in accordance with the evaluation criteria. The government reserves the right to make an award without discussions based solely on initial quotes. Therefore, offerors should ensure that their initial quote constitutes their best offer in terms of both price and technical approach being proposed.

(End of clause)

STATEMENT OF WORK & SPECIFICATIONS

PAGE 8 OF 101 1305M221QNMAN0136

Department of Commerce National Oceanic and Atmospheric Administration

NOAA Diving Center 7600 Sand Point Way NE, Bldg 8

Seattle, WA 98115

SPECIFICATIONS FOR REPLACEMENT OF AIR CONDITIONING SYSTEM ON A

CONTAINERIZED HYPERBARIC CHAMBER SYSTEM

INTRODUCTION

The NOAA Diving Center, is soliciting bids for the replacement of an air conditioning system used to provide climate control to a hyperbaric chamber system housed within a standard 20 foot shipping container (conex box) located at the NOAA Inouye Regional Center (IRC) at 1845 Wasp Boulevard, Building 176, Honolulu, HI 96818. The conex system is designed to be loaded onto vessels conducting various diving missions around Hawaii and U.S. minor outlying islands of the south Pacific. The hyperbaric chamber includes sensitive equipment that must be kept in a contained, clean, dry, and climate controlled environment.

The air conditioning unit currently installed is a Mistubishi Mr. Slim ductless split unit system.

The exterior unit model number is PUH18EK and the interior unit model number is PKH18FK3.

Both the interior unit and the exterior unit operate and function as a single assembly. Manuals with specifications of the units/assembly are attached to this document. The current units/ assembly is no longer functioning properly.

SPECIFICATIONS

1.0 Scope of Work

This solicitation consists of the following work items:

1. Pump down the system and recover remaining refrigerant into an approved cylinder.

2. Tag out and disconnect electrical and refrigerant piping and remove old equipment.

3. Install new equipment and connect piping, drain, and electrical power.

4. Pressurize the connected system with dry nitrogen and test for leaks.

5. Evacuate the system to industry standards and open isolation valves, and charge with an

EPA-approved refrigerant.

6. Restore power, start unit and check for proper operation.

7. Clean up the work area and dispose of the old unit and materials (including oil and refrigerant) off site.

2.0 Replacement Assembly Specifications

The replacement unit must:

PAGE 9 OF 101 1305M221QNMAN0136

have the same cooling capacity as the currently installed unit (18,000 BTU) have the same power requirements as the currently installed unit (208/230 V, single phase, 60 Hz) have the ability to be installed without structural modifications to the conex box and without significantly affecting the dimensions or footprint of the existing system.

be able to interface into existing refrigerant and drain piping.

use an EPA approved refrigerant (e.g. R-410A) Replacement unit will be of the same brand as the existing unit.

3.0 Workmanship

Workmanship will be of the highest quality and consistent with commonly accepted industrial standards used by manufacturers of similar equipment. Workmanship will comply with applicable ASTM, AWS and on-site building and electrical codes and requirements.

The contractor is required to comply with all applicable state and federal regulations including the proper use and disposal of all materials used.

Due care should be taken to ensure that existing mechanical equipment within the conex box is not damaged.

Installation and testing of the equipment will be performed to the manufacturer’s specifications.

4.0 Pre-Bid Submission Inspection

Prospective bidders are encouraged to view the current configuration prior to submitting a bid.

Inspection of the conex can be arranged by contacting the designated Government’s Points of Contact (GPOC).

5.0 Schedule & Timing

The Contractor shall furnish the Government with a copy of a schedule of the work for approval within two (2) calendar days after award of contract. The schedule shall show all work activities for completion of the work to be performed under this contract and will show the Contractor's general sequential approach to the work. All work shall be accomplished during normal business hours 7:00 a.m. - 3:30 p.m. Monday through Friday excluding holidays. Work may be performed outside the scheduled hours as approved by the Government's Points of Contact (GPOC).

All work associated with this specification must be coordinated with the GPOC and must be completed by August 31, 2021.

6.0 Safety

The Contractor shall comply with the requirements of the OSHA Part 1910, Occupational Safety and Health Standards, 1925, Safety and Health Standards for Federal Service Contracts and other

PAGE 10 OF 101 1305M221QNMAN0136

pertinent regulations. The Contractor shall promptly correct any non-complying work or conditions. Contractor shall be responsible to ensure its work does not affect the safety of the public or employees of the Government. Neither the Government nor its representatives shall bear any responsibility for safety precautions at the project work site. If, however, in the opinion of the GPOC a life-threatening condition exists, the GPOC will orally (to be confirmed in writing) require the Contractor to immediately suspend work in the affected area until the condition is corrected. Whenever Contractor’s operations may create a hazardous condition, it shall at its sole expense, furnish, install and maintain such flagmen, guards, fences, barricades, railings, light, signs, or other devices necessary to prevent accidents, injury or damage to people or equipment.

COVID-19 guidelines are constantly evolving at the facility. The Contractor should contact the GPOC to receive the latest guidance on screening, distancing, and face covering policies while on the facility.

7.0 Use of Government Facilities

Water and electricity for service purposes are available at the work site. Toilet facilities available for the Contractor's use are located in the IRC.

8.0 Protection

The Contractor shall use reasonable care to avoid damaging the building, equipment, vehicles and vegetation at the site. If the Contractor’s failure to use reasonable care causes damage to any of this property, the Contractor shall replace or repair the damage at no expense to the Government as the Contracting Officer directs.

9.0 Access to the Worksite

The NOAA Inouye Regional Center (IRC) on Ford Island in Pearl Harbor. Ford Island is a U.S.

Navy base and therefore access is restricted. The Contractor's vehicles, subcontractor's vehicles, employees of the contractor or subcontractors entering the facility will need to coordinate access at least 14 days prior commencing work. Parking for contractor vehicles will be provided on site.

10.0 Final Inspection and Acceptance

Should the contractor fail to comply with any requirements of this statement of work, the Government will reject the failed items and the contractor will determine the cause(s) at no additional cost to the Government. The contractor will not be held responsible for the replacement of any component that functions in compliance with their related manufacturer’s published specification, unless such replacement is required due to poor workmanship, incorrect installation, structural damage, or other, specified causes for rejection.

PAGE 11 OF 101 1305M221QNMAN0136

The Contractor shall contact the GPOC to arrange for Final Inspection on the planned completion date. The Contractor is advised that the Government will not accept the work until it determines substantial completion has been achieved.

11.0 Hazardous Materials

The Contractor shall not cause or permit any hazardous material to be brought upon, kept or used in or about the premises by its agents, employees, or subcontractors without the prior consent of the designated GPOC. Hazardous materials that are necessary to the performance of this contract shall be used, kept and stored in a manner that complies with all laws regulating any such hazardous material brought upon or used or kept at this site. Contractor shall provide Material Safety Data Sheets to the GPOC for any hazardous materials used in the performance of this contract.

As used herein, the term “Hazardous Material” means any hazardous or toxic substance, material, or waste, including but not limited to, those substances, materials, and wastes listed in the Department of Transportation Hazardous Material Table (49 CFR 172.101) or by the Environmental Protection Agency as hazardous substances (40 CFR Part 68.130) and amendments thereto, petroleum products, or such other substances, material, and wastes that are or become regulated under any applicable local, state, or Federal law.

12.0 Designated Government Point of Contacts

Kerry Reardon Kerry.Reardon@noaa.gov

(808) 725-5465

Brianna D. Pacheco brianna.pacheco@noaa.gov Office: (808) 725-5762 Cell: (856) 906-1544

PAGE 12 OF 101 1305M221QNMAN0136

Air-Conditioners

PLH18, 24, 30, 36, 42AK

PL12, 18, 24, 30, 36, 42AK

PCH24, 30, 36, 42GK

PC24, 30, 36, 42GK

PKH18, 24, 30, 36FK3

PK12, 18, 24, 30, 36FK3

PKH18, 24, 30, 36FL

PK18, 24, 30, 36FL3

OPERATION MANUAL

For safe and correct use, please read this operation manual thoroughly before operating the air-conditioner unit.

FOR USER

PAGE 13 OF 101 1305M221QNMAN0136

s Before installing the unit, make sure you read all the “Safety precautions”.

s The “Safety precautions” provide very important points regarding safety.

Make sure you follow them.

s If none of the above apply, turn the main switch off and contact the dealer from whom you bought the air-conditioner, telling him the model name and the nature of the problem.

Do not try to fix the unit yourself.

Symbols used in the text Warning:

Describes precautions that should be observed to prevent danger of injury or death to the user.

Caution:

Describes precautions that should be observed to prevent damage to the unit.

1. Safety PrecautionsContents

1. Safety Precautions

2. Operation

2.1. Switching the unit on/off

2.2. Mode select

2.3. Selecting a temperature

2.4. Selecting a fan speed

2.5. Adjusting airflow direction

2.6. Using the timer

3. Care and cleaning

3.1. Cleaning the filters and the indoor unit

3.2. Care and cleaning

4. Troubleshooting

5. Specifications

Symbols used in the illustrations : Indicates an action that must be avoided.

: Indicates that important instructions must be followed.

: Indicates a part which must be grounded.

Warning:

Carefully read the labels affixed to the main unit.

Warning:

• The unit should not be installed by the user. Ask the dealer or an authorized company to install the unit. If the unit is installed improperly, water leakage, electric shock or fire may result.

• Do not stand on, or place any items on the unit.

• Do not splash water over the unit and do not touch the unit with wet hands.

An electric shock may result.

• Do not spray combustible gas close to the unit. Fire may result.

• Do not place a gas heater or any other open-flame appliance where it will be exposed to the air discharged from the unit. Incomplete combustion may result.

Caution:

• Do not use any sharp object to push the buttons, as this may damage the remote controller.

• Never block or cover the indoor or outdoor unit’s intakes or outlets.

Warning:

• Do not remove the front panel or the fan guard from the outdoor unit when it is running. You could be injured if you touch rotating, hot or high-voltage parts.

• Never insert fingers, sticks etc. into the intakes or outlets, otherwise injury may result, since the fan inside the unit rotates at high speed.

• If you detect odd smells, stop using the unit, turn off the power switch and consult your dealer.

• This air conditioner is NOT intended for use by children or infirm persons without supervisions.

• Young children should be supervised to ensure that they do not play with the air conditioner.

Disposing of the unit When you need to dispose of the unit, consult your dealer. If pipes are removed incorrectly, refrigerant (fluorocarbon gas) may blow out and come into contact with your skin, causing injury. Releasing refrigerant into the atmosphere also damages the environment.

ON/OFF –

STAND BY

DEFROST

DRY COOL

AUTO FAN

HEAT

CENTRALLY CONTROLLED

˚F

SWING

FAN

SPEED

AUTO

RETURN

NOT AVAILABLE

˚F

CHECK MODE

FILTER

TIMER

TEST RUN

TIMER OFF CLOCK AUTO AUTOCHECK SET TEMP. START STOP

PAGE 14 OF 101 1305M221QNMAN0136

ON/OFF –

TIMER SETSET TEMP.

REMOTE CONTROLLER

MODE TIMER ON/OFF CLOCK/TIMER FAN SPEED AIR DISCHARGE FILTER

AIR SWEEP CHECK

TEST RUN

STAND BY

DEFROST

DRY COOL

AUTO FAN

HEAT

CENTRALLY CONTROLLED ˚FSWING

FAN

SPEED AUTO

RETURN

NOT AVAILABLE˚F

CHECK MODE

FILTER

TIMER

TEST RUN

TIMER OFF CLOCK AUTO AUTO

CHECK SET TEMP. START STOP

A

2. Operation

Operating range Indoor air intake temperature Outdoor air intake temperature

Cooling Maximum 95 °F DB, 71 °F WB 115 °F DB Minimum 67 °F DB, 57 °F WB 0 °F DB*

Heating Maximum 80 °F DB, 67 °F WB 75 °F DB, 65 °F WB Minimum 70 °F DB, 60 °F WB 17 °F DB, 15 °F WB

* With wind baffle installed. Without wind baffle, the minumum temperature will be

23 °F DB.

2.1. Switching the unit on/off

• The power supply should not be turned off while the air conditioner is in use. This can cause the unit to break down.

1 Press the ON/OFF button.

A The ON indicator should light up.

• Even if you press the ON/OFF button immediately after shutting down the opera-tion in progress, the air conditioner will not start for about three minutes. This is to prevent the internal components from being damaged.

• If the operation stops due to a power failure, the unit will not automatically restart until the power has been restored. Press the ON/OFF button to restart.

2.2. Mode select

1 If the unit is off, press the ON/OFF button to turn it on.

A The ON indicator should light up.

2 Press the operation mode button C and select the operation mode.

B

COOL Cooling mode AUTO Automatic (cooling/heating) mode (For PLH/PCH/PKH)

DRY Drying mode HEAT Heating mode (For PLH/PCH/PKH)

FAN Fan mode (For PL/PC/PK)

Note:

The heating display and the automatic display does not appear in models that operate exclusively as cooling only air-conditioner.

2.3. Selecting a temperature

sssss To decrease the room temperature:

1 Press set temperature button to set the desired temperature.

A The selected temperature is displayed.

• Each time you press the button, the temperature value decreases by 2 °F.

sssss To increase the room temperature:

1 Press set temperature button to set the desired temperature.

A The selected temperature is displayed.

• Each time you press the button, the temperature value increases by 2 °F.

• Available temperature ranges are as follows:

Cooling & Drying: 65 - 87 °F Heating: 61 - 83 °F Automatic: 65 - 83 °F

• The display flashes either 47 °F or 97 °F to inform you if the room temperture is lower or higher than the displayed temperature.

2.4. Selecting a fan speed

1 Press fan speed button to select a desired fan speed.

• Each time you press the button, available options change with the display A on the remote controller, as shown below.

Wireless type Wired type

Display

FAN

SPEED

FAN

SPEED

Available Option (Fan Speed Switch) Low-High Low-High

The display and the fan speed of the unit will differ in the following situations:

• When STAND BY and DEFROST are displayed.

• Just after the heating mode (while waiting to change to another mode).

• When the temperature of the room is higher than the temperature setting of the unit operating in the heating mode.

• In Dry mode, where the speed is set automatically and cannot be changed. Only the display on the remote controller changes.

ON/OFF –

TIMER SETSET TEMP.

REMOTE CONTROLLER

MODE TIMER ON/OFF CLOCK/TIMER FAN SPEED AIR DISCHARGE FILTER

AIR SWEEP CHECK

TEST RUN

STAND BY

DEFROST

DRY COOL

AUTO FAN

HEAT

CENTRALLY CONTROLLED ˚FSWING

FAN

SPEED AUTO

RETURN

NOT AVAILABLE˚F

CHECK MODE

FILTER

TIMER

TEST RUN

TIMER OFF CLOCK AUTO AUTO

CHECK SET TEMP. START STOP

A

ON/OFF TEMP

FAN

VANE

TEST RUN

AUTO STOP

AUTO START

h min

LOUVER

MODE

CHECK

RESETSET CLOCK

MODEL

SELECT

NOT AVAILABLE

SWING

CHECK

FAN

TEST

RUN F̊

C̊

AMPMSTOP

START AMPM

COOL

DRY

AUTO

FAN

HEAT

ON/OFF TEMP

FAN

VANE

TEST RUN

AUTO STOP

AUTO START

h min

LOUVER

MODE

CHECK

RESETSET CLOCK

MODEL

SELECT

NOT AVAILABLE

SWING

CHECK

FAN

TEST

RUN F̊

C̊

AMPMSTOP

START AMPM

COOL

DRY

AUTO

FAN

HEAT

B

C

ON/OFF TEMP

FAN

VANE

TEST RUN

AUTO STOP

AUTO START

h min

LOUVER

MODE

CHECK

RESETSET CLOCK

MODEL

SELECT

NOT AVAILABLE

SWING

CHECK

FAN

TEST

RUN F̊

C̊

AMPMSTOP

START AMPM

COOL

DRY

AUTO

FAN

HEAT

A

ON/OFF –

TIMER SETSET TEMP.

REMOTE CONTROLLER

MODE TIMER ON/OFF CLOCK/TIMER FAN SPEED AIR DISCHARGE FILTER

AIR SWEEP CHECK

TEST RUN

STAND BY

DEFROST

DRY COOL

AUTO FAN

HEAT

CENTRALLY CONTROLLED ˚FSWING

FAN

SPEED AUTO

RETURN

NOT AVAILABLE˚F

CHECK MODE

FILTER

TIMER

TEST RUN

TIMER OFF CLOCK AUTO AUTO

CHECK SET TEMP. START STOP

A1

ON/OFF –

TIMER SETSET TEMP.

REMOTE CONTROLLER

MODE TIMER ON/OFF CLOCK/TIMER FAN SPEED AIR DISCHARGE FILTER

AIR SWEEP CHECK

TEST RUN

STAND BY

DEFROST

DRY COOL

AUTO FAN

HEAT

CENTRALLY CONTROLLED ˚FSWING

FAN

SPEED AUTO

RETURN

NOT AVAILABLE˚F

CHECK MODE

FILTER

TIMER

TEST RUN

TIMER OFF CLOCK AUTO AUTO

CHECK SET TEMP. START STOP

A

BC

ON/OFF TEMP

FAN

VANE

TEST RUN

AUTO STOP

AUTO START

h min

LOUVER

MODE

CHECK

RESETSET CLOCK

MODEL

SELECT

NOT AVAILABLE

SWING

CHECK

FAN

TEST

RUN F̊

C̊

AMPMSTOP

START AMPM

COOL

DRY

AUTO

FAN

HEAT

A

FAN FAN

PAGE 15 OF 101 1305M221QNMAN0136

ON/OFF –

TIMER SETSET TEMP.

REMOTE CONTROLLER

MODE TIMER ON/OFF CLOCK/TIMER FAN SPEED AIR DISCHARGE FILTER

AIR SWEEP CHECK

TEST RUN

STAND BY

DEFROST

DRY COOL

AUTO FAN

HEAT

CENTRALLY CONTROLLED ˚FSWING

FAN

SPEED AUTO

RETURN

NOT AVAILABLE˚F

CHECK MODE

FILTER

TIMER

TEST RUN

TIMER OFF CLOCK AUTO AUTO

CHECK SET TEMP. START STOP

F

2. Operation

2.5. Adjusting airflow direction

The vertical air vane helps select the vertical direction of the airflow.

1 Press AIR DISCHARGE button to select the vertical airflow direction.

• Each time you press the button, the option changes are displayed on the remote controller, as shown below.

A (swing) → B → C → D → E → A

• In cooling/drying mode with the fan speed set to LOW, every press on the button will change the direction in the order of A, B, D, A. (C can not be set)

• If D or E is set, the angle will automatically revert to B after one hour of operation.

(Do not use D and E too often in cooling/drying mode with the fan speed set to LOW, or condensation or dripping can occur.)

F “AUTO RETURN” should be displayed.

• When the angle setting is C in cooling mode, switching the fan speed from HIGH to LOW will cause the angle to revert to B automatically.

• The airflow direction can not be set with UP/DOWN while the SWING setting is being used.

• The arrow indicators are alternately displayed when the air sweep is in operation, however they are not displayed when the air sweep is not in operation.

• The left/right guide vanes of PC(H) series and the guide vane of the PK(H) serises can be changed manually.

2.6. Using the timer

1) Set the current time 1 Press clock/timer button to display the “CLOCK” B.

Remote CLOCK → AUTO

START

→AUTO

STOP

→ No Display controller display A

2 Each time you press

TIMER SET

button, the time increases in increments of one minute.

Each time you press TIMER SET button, the time decreases in increments of one minute.

• Press and hold the button to rapidly change the time.

• The time changes in increments of one minute → ten minutes → in units of hour; in this order.

• Approximately ten seconds after pressing the button, the display on the remote controller will turn off.

(For Wireless Remote Controller)

1 Press the CLOCK button using a thin stick and blink the time A.

2 Press the h and min button to set the current time.

3 Press the CLOCK button using a thin stick.

2) Set the time to start the unit as follows

1 Press clock/timer button to display B

AUTO

START .

2 Press TIMER SET button to set the time that you want the unit to start.

The start time is displayed at A.

(For Wireless Remote Controller)

1 Press the

AUTO START

button.

• Time can be set while the following symbol is blinking.

ON time : B START is blinking.

2 Use the h and min buttons to set the desired time.

3 To cancel the ON timer, press the

AUTO START

button.

3) Set the time to stop the unit as follows

1 Press clock/timer button to display C AUTO

STOP .

2 Press TIMER SET button to set the time that you want the unit to stop.

The stop time is displayed at A.

(For Wireless Remote Controller)

1 Press the AUTO STOP button.

• Time can be set while the following symbol is blinking.

OFF time : C STOP is blinking.

2 Use the h and min buttons to set the desired time.

3 To cancel the OFF timer, press the AUTO STOP button.

4) Changing the set times 1 Press clock/timer button to display the time (CURRENT, START, STOP) you want to change.

2 Press TIMER SET button to set the desired time.

• When change is made to either one of a pair, e.g., AUTO START or AUTO STOP, set the time you need not to change to . This display is available following

23:50.

(For Wireless Remote Controller)

Press the AUTO START or AUTO STOP to cancel the timer and repeat from 2) or 3).

A B C D E

A B C D E

PL(H) Swing 30° 45° 55° 70° PK(H)* Swing 10° 30° 60° 70°

PK12FK3 – 10° 30° 60° 70°

PC(H) Swing 100% Horizontal 20° 40° 60°

* Except PK12FK3

ON/OFF TEMP

FAN

VANE

TEST RUN

AUTO STOP

AUTO START

h min

LOUVER

MODE

CHECK

RESETSET CLOCK

MODEL

SELECT

NOT AVAILABLE

SWING

CHECK

FAN

TEST

RUN F̊

C̊

AMPMSTOP

START AMPM

COOL

DRY

AUTO

FAN

HEAT

ON/OFF –

TIMER SETSET TEMP.

REMOTE CONTROLLER

MODE TIMER ON/OFF CLOCK/TIMER FAN SPEED AIR DISCHARGE FILTER

AIR SWEEP CHECK

TEST RUN

STAND BY

DEFROST

DRY COOL

AUTO FAN

HEAT

CENTRALLY CONTROLLED ˚FSWING

FAN

SPEED AUTO

RETURN

NOT AVAILABLE˚F

CHECK MODE

FILTER

TIMER

TEST RUN

TIMER OFF CLOCK AUTO AUTO

CHECK SET TEMP. START STOP

B

A

ON/OFF TEMP

FAN

VANE

TEST RUN

AUTO STOP

AUTO START

h min

LOUVER

MODE

CHECK

RESETSET CLOCK

MODEL

SELECT

NOT AVAILABLE

SWING

CHECK

FAN

TEST

RUN F̊

C̊

AMPMSTOP

START AMPM

COOL

DRY

AUTO

FAN

HEAT

A

ON/OFF –

TIMER SETSET TEMP.

REMOTE CONTROLLER

MODE TIMER ON/OFF CLOCK/TIMER FAN SPEED AIR DISCHARGE FILTER

AIR SWEEP CHECK

TEST RUN

STAND BY

DEFROST

DRY COOL

AUTO FAN

HEAT

CENTRALLY CONTROLLED ˚FSWING

FAN

SPEED AUTO

RETURN

NOT AVAILABLE˚F

CHECK MODE

FILTER

TIMER

TEST RUN

TIMER OFF CLOCK AUTO AUTO

CHECK SET TEMP. START STOP

ABC

ON/OFF TEMP

FAN

VANE

TEST RUN

AUTO STOP

AUTO START

h min

LOUVER

MODE

CHECK

RESETSET CLOCK

MODEL

SELECT

NOT AVAILABLE

SWING

CHECK

FAN

TEST

RUN F̊

C̊

AMPMSTOP

START AMPM

COOL

DRY

AUTO

FAN

HEAT

C

A B

PAGE 16 OF 101 1305M221QNMAN0136

C

B

D

A

ON/OFF –

STAND BY

DEFROST

DRY COOL

AUTO FAN

HEAT

CENTRALLY CONTROLLED ˚FSWING

FAN

SPEED AUTO

RETURN

NOT AVAILABLE˚F

CHECK MODE

FILTER

TIMER

TEST RUN

TIMER OFF CLOCK AUTO AUTO

CHECK SET TEMP. START STOP

BA

D

C

3. Care and cleaning

Caution:

• Always turn off the power, first on the remote controller and then the main switch, before cleaning or servicing the unit.

• When installing or removing the filter or the intake grille, do not stand on an unsteady surface. You may fall and injure yourself. Be also careful not to let dust fall into your eyes.

Dirty or clogged filters block the airflow and reduce efficiency. Very dirty filters can damage the air-conditioner itself.

■ PLH/PL Series Intake grille removal

• Pull the knob on the intake grille in the direction indicated by the arrow and it should open.

• Unhook the hinges to remove the intake grille from the grille.

Filter removal

• Open the intake grille.

• Release the knob on the center edge of the intake grille and pull the filter forward to remove the filter.

A Knob B Grille C Intake grille D Filter

■ PCH/PC Series

• Open the intake grille.

• Hold the knob on the filter then pull the filter up in the direction of an arrow. To replace the filter after cleaning, be sure to insert the filter far enough until it fits into the stopper.

A Filter B Intake Grille C Knob D Stopper

■ PKH/PK Series

• Hold the filter lug (located at the bottom of the intake grill) and pull it out downward.

• To install the filters, push the filter lug upward.

A Filter B Lug

3.1. Cleaning the filters and the indoor unit

Cleaning the filters

• Clean the filters using a vacuum cleaner. If you do not have a vacuum cleaner, tap the filters against a solid object to knock off dirt and dust.

• If the filters are especially dirty, wash them in lukewarm water. Take care to rinse off any detergent thoroughly and allow the filters to dry completely before putting them back into the unit.

Caution:

• Do not dry the filters in direct sunlight or by using a heat source, such as an electric heater: this may warp them.

• Do not wash the filters in hot water (above 120°F), as this may warp them.

• Make sure that the air filters are always installed. Operating the unit without air filters can cause malfunction.

Cleaning the indoor unit

• Wipe the outside of the unit with a clean, dry, soft cloth.

• Clean off any oil stains or finger marks using a neutral household detergent (such as dishwashing liquid or laundry detergent).

Caution:

Never use gasoline, benzene, thinner, scouring powder or any type of non-neutral detergent, as these substances may damage the unit’s case.

■ PLH/PL Series

■ PCH/PC Series

■ PKH/PK Series

B A

PAGE 17 OF 101 1305M221QNMAN0136

4. Troubleshooting

NOTE: After a power cut, the unit will not restart automatically. You will have to restart it by pressing the POWER - ON/OFF button on the remote controller.

Wired remote controllers In any of the following cases, turn off the main power switch and contact your local dealer for service:

• “CHECK” followed by “P1”, “P2”, “P3”, “P4”, “P5”, “P7” or “CENTRALLY CONTROLLED” is displayed on the control panel.

• The switches do not work properly.

• The circuit breaker trips frequently (or the fuse blows frequently).

• Water has accidentally been splashed into the unit.

• Water leaks from the unit.

• Something is accidentally dropped into the air-conditioner.

• An unusual noise is heard during operation.

Warning:

If the air conditioner operates but does not cool or heat (depending on model) the room, consult your dealer since there may be a refrigerant leak.

Be sure to ask the service representative whether there is refrigerant leakage or not when repairs are carried out.

The refrigerant charged in the air conditioner is safe. Refrigerant normally does not leak, however, if refrigerant gas leaks indoors, and comes into contact with the fire of a fan heater, space heater, stove, etc., harmful substances will be generated.

Problem

Unit will not start.

Unit discharges air well, but fails to cool or heat the room well.

Unit does not start immediately.

Unit stops soon after starting.

Cause

Main power switch is turned off.

Main power fuse has blown.

Outdoor unit’s ground fault breaker is open.

A power cut has occurred (see NOTE be-low).

Improper temperature setting - e.g. you have selected COOL mode, but the desired temperature setting is higher than the cur-rent room temperature.

Filters are clogged.

Outdoor unit’s intake or outlet is obstructed.

A door or window has been left open.

Unit is waiting three minutes before restart-ing.

Indoor or outdoor unit’s intake or outlet is obstructed.

Filters are clogged.

Solution

Turn main power on. Then press the POWER ON/OFF button to turn the unit on.

Replace the fuse.

Reset the ground fault breaker.

Wait until power is restored, then press the POWER ON/OFF button to turn the unit on.

Check the set temperature on the remote controller and the actual intake air tem-perature. Use the COOLER and WARMER buttons to set the temperature as described in “Selecting a temperature” on page 3.

Clean the filter and resume operation.

See “Cleaning the filters and the indoor unit” on page 5.

Remove the obstruction.

Shut door or window.

Wait until the unit restarts automatically.

The compressor may hesitate resuming because a three-minute resume preven-tion circuit is incorporated in the outdoor unit for protection of the compressor.

Remove obstruction and restart the unit.

Remove the obstruction. Clean the filter and resume operation.

Display reading

Pilot lamp does not turn on even when the POWER ON/OFF button is pressed.

Remote controller shows that the unit is operating.

Remote controller shows that the unit is operating.

Remote controller check display reads “CHECK P6” or “CHECK P8”.

4. Troubleshooting Before you call out a repair man, check the following table to see whether there is a simple solution to your problem.

ON/OFF –

TIMER SETSET TEMP.

REMOTE CONTROLLER

MODE TIMER ON/OFF CLOCK/TIMER FAN SPEED AIR DISCHARGE FILTER

AIR SWEEP CHECK

TEST RUN

STAND BY

DEFROST

DRY COOL

AUTO FAN

HEAT

CENTRALLY CONTROLLED ˚FSWING

FAN

SPEED AUTO

RETURN

NOT AVAILABLE˚F

CHECK MODE

FILTER

TIMER

TEST RUN

TIMER OFF CLOCK AUTO AUTO

CHECK SET TEMP. START STOP

A

3.2. Care and cleaning

Clean the filter When the A “FILTER” indicator blinks on the remote controller to alert you to the necessity of cleaning of the filter.

∗ As a guideline for typical office environment, the long-life filter must be cleaned every 2,500 (PL(H))/100 (PC(H), PK(H)) operating hours.

Reset the FILTER indicator 1 Press the FILTER button twice after cleaning.

s When you press the FILTER button twice, the “FILTER” indicator A will be turned off and reset.

s The FILTER indicator provides you with a guideline for the necessity of filter cleaning based on total operating hours in typical indoor air condi-tions. Depending on different operating environments, more or less fre-quent cleaning may be necessary.

• Not available for wireless remote controller.

3. Care and cleaning

PAGE 18 OF 101 1305M221QNMAN0136

PLH18AK PLH24AK PLH30AK PLH36AK PLH42AK

18,000 24,000 30,000 35,400 42,000

19,000 [24,500/25,500] 26,000 [31,500/32,500] 33,000 [39,500/41,200] 38,000 [45,900/47,600] 44,300 [52,200/53,900] 11,000 [16,500/17,500] 16,500 [22,000/23,000] 18,500 [25,000/26,700] 23,000 [30,900/32,600] 26,800 [34,700/36,400]

1.75 2.57 3.17 3.63 3.98

1.59 [3.19/3.49] 2.51 [4.11/4.41] 3.04 [4.94/5.44] 3.45 [5.75/6.25] 3.82 [6.12/6.62]

1.32 [2.92/3.22] 2.15 [3.75/4.05] 2.55 [4.45/4.95] 2.93 [5.23/5.73] 3.24 [5.54/6.04]

10.5 10.3 10.4 10.0 10.7

7.2 7.0 6.9 7.1 7.0

PLH18AK PLH24AK PLH30AK PLH36AK PLH42AK

Munsell 0.7Y 8.59/0.97

208/230, 1, 60 20 25 15 17

0.7 1.2 1.4 7.7/8.3 [1.6/1.9] 9.1/10.4 [1.9/2.4] 11.1/12.2 [2.3/2.8]

530-710 710-990 780-1060 490-670 670-950 740-1020

33-1/16 33-1/16

10-3/16 11-3/4 37-3/8 37-3/8 1-3/16

57 71 75

PUH18EK PUH24EK PUH30EK PUH36EK PUH42EK7

Munsell 5Y 7/1 208/230, 1, 60

20 30 40 16 20 22 28

0.75 0.65+0.65 0.75+0.75 0.8+0.8

RH247NAB NH33NBD NH41NAD NH47NAD ZR42K3-PFV

12.0 11.5 14.0 17.5 20.4 37 54 73 87 109

0.11/0.17 (23/28) 0.16/0.17 (33/39) Capillary tube Reverse cycle

34-1/4 38-3/16 11-5/8 13-9/16

33-1/2 49-9/16 131 202 245 246 246

With grille

Indoor unit-remote controller DC12V, Indoor unit- outdoor unit DC12V

Cooling *1 BTU/h Capacity Heating *1,*3 BTU/h

Heating *2,*3 BTU/h Cooling *1 kW Heating *1,*3 kW Heating *2,*3 kW

SEER

HSPF

INDOOR UNIT MODELS

External finish Power supply V, Phase, Hz Max. fuse size (time delay) A Min. ampacity A Fan motor F. L. A.

Auxiliary heater A (kW) Airflow Dry CFM Lo-Hi Wet CFM

W in Dimensions D in

H in W in

Dimensions D in

(GRILLE)

H in

Weight lbs Weight (GRILLE) lbs

OUTDOOR UNIT MODELS

External finish Power supply V, Phase, Hz Max. fuse size (time delay) A Min. ampacity A Fan motor F. L. A.

Models Compressor R. L. A.

L. R. A.

Crankcase heater A (W) Refrigerant control Defrost method

W in Dimensions D in

H in Weight lbs

REMOTE CONTROLLER

Control voltage (by built-in transformer)

Item Models

Power consumption

NOTES: *1 Rating conditions (cooling) – indoor: 80°F DB. 67°F WB outdoor: 95°F DB. 75°F WB (heating) – indoor: 70°F DB. 60°F WB outdoor: 47°F DB. 43°F WB

*2 Rating conditions (heating) – indoor: 70°F DB. 60°F WB outdoor: 17°F DB. 15°F WB *3 Heating capacity and power consumption in [ ] include auxiliary electric heater operation at 208/230V.

Units should be installed by licensed electric contractor accordingly to local code requirement.

* Specifications subject to change without notice.

5. Specifications

PAGE 19 OF 101 1305M221QNMAN0136

PL12AK PL18AK PL24AK PL30AK PL36AK PL42AK

12,500 18,400 24,000 31,000 36,500 42,500

1.26 1.85 2.65 3.17 3.64 4.08

10.1 10.2 10.0 10.6 10.5 10.8

PL12AK PL18AK PL24AK PL30AK PL36AK PL42AK

Galvanized sheets with gray heat insulation

Munsell 0.7Y 8.59/0.97 115, 1, 60

2.0 3.0

1.2 2.6

420-560 530-710 710-990 780-1060 390-530 490-670 670-950 740-1020

33-1/16 33-1/16

10-3/16 11-3/4 37-3/8 37-3/8 1-3/16

49 53 66 71

PU12EK PU18EK PU24EK PU30EK PU36EK PU42EK7

Munsell 5Y 7/1 208/230, 1, 60

15 20 30 40 11 16 20 22 28

0.65 0.75 0.65+0.65 0.75+0.75 0.8+0.8

RH167NAB RH247NAB NH33NBD NH41NAD NH47NAD ZR42K3-PFV

8.9 12.0 11.5 14.0 17.5 20.4 29 37 54 73 87 109

0.11/0.12 (23/28) 0.16/0.17 (33/39) Capillary tube

34-1/4 38-3/16 11-5/8 13-9/16

25-9/16 33-1/2 49-9/16 105 154 207 220 220

With grille

Indoor unit-remote controller DC12V, Indoor unit- outdoor unit DC12V

Cooling capacity *1 BTU/h Power consumption *1 kW

SEER

INDOOR UNIT MODELS

External finish External finish (GRILLE) Power supply V, Phase, Hz Max. fuse size (time delay) A Min. ampacity A Fan motor F. L. A.

Airflow Dry CFM Lo-Hi Wet CFM

W in Dimensions D in

H in W in

Dimensions D in

(GRILLE)

H in

Weight lbs Weight (GRILLE) lbs

OUTDOOR UNIT MODELS

External finish Power supply V, Phase, Hz Max. fuse size (time delay) A Min. ampacity A Fan motor F. L. A.

Model Compressor R. L. A.

L. R. A.

Crankcase heater A (W) Refrigerant control

W in Dimensions D in

H in Weight lbs

REMOTE CONTROLLER

Control voltage (by built-in transformer)

Item Models

NOTES: *1 Rating conditions (cooling) – indoor: 80°F DB. 67°F WB outdoor: 95°F DB. 75°F WB

Units should be installed by licensed electric contractor accordingly to local code requirement.

PAGE 20 OF 101 1305M221QNMAN0136

PCH24GK PCH30GK PCH36GK PCH42GK

24,000 30,000 35,400 42,000

27,000 [34,000/35,500] 33,000 [40,500/42,500] 38,000 [45,500/47,500] 45,000 [52,500/54,500] 14,800 [21,800/23,300] 20,000 [27,500/29,500] 21,000 [28,500/30,500] 23,800 [31,300/33,200]

2.51 3.23 3.60 4.10

2.46 [4.49/4.94] 3.00 [5.25/5.76] 3.32 [5.57/6.08] 3.76 [6.03/6.52]

1.95 [3.98/4.43] 2.58 [4.83/5.34] 2.63 [4.88/5.39] 3.00 [5.25/5.76]

10.3 10.0 10.3 10.3

6.8 7.0 7.0 7.2

PCH24GK PCH30GK PCH36GK PCH42GK

Munsell 0.7Y 8.59 / 0.97

208 / 230, 1, 60 20 25 15 17

1.1 1.3

9.8/10.8 [2.0/2.5] 10.8/12.0 [2.2/2.8] 710-880 990-1,240 640-810 880-1,130 51-9/16 63-3/4

26-3/4 10-5/8

87 101 106

PUH24EK PUH30EK PUH36EK PUH42EK7

Munsell 5Y 7/1 208/230, 1, 60

20 30 40 16 20 22 28

0.65+0.65 0.75+0.75 0.8+0.8

NH33NBD NH41NAD NH47NAD ZR42K3-PFV

11.5 14.0 17.5 20.4 54 73 87 109

0.16/0.17 (33/39) Capillary tube Reverse cycle

34-1/4 38-3/16 11-5/8 13-9/16

49-9/16 202 245 246 246

With indoor unit

Indoor unit-remote controller DC12V, Indoor unit- outdoor unit DC12V

Cooling *1 BTU/h Capacity Heating *1,*3 BTU/h

Heating *2,*3 BTU/h Cooling *1 kW Heating *1,*3 kW Heating *2,*3 kW

SEER

HSPF

INDOOR UNIT MODELS

External finish Power supply V, Phase, Hz Max. fuse size (time delay) A Min. ampacity A Fan motor F. L. A.

Auxiliary heater A (kW) Airflow Dry CFM Lo-Hi Wet CFM

W in Dimensions D in

H in Weight lbs

OUTDOOR UNIT MODELS

External finish Power supply V, Phase, Hz Max. fuse size (time delay) A Min. ampacity A Fan motor F. L. A.

Models Compressor R. L. A.

L. R. A.

Crankcase heater A (W) Refrigerant control Defrost method

W in Dimensions D in

H in Weight lbs

REMOTE CONTROLLER

Control voltage (by built-in transformer)

Item Models

Power consumption

NOTES: *1 Rating conditions (cooling) – indoor: 80°F DB. 67°F WB outdoor: 95°F DB. 75°F WB (heating) – indoor: 70°F DB. 60°F WB outdoor: 47°F DB. 43°F WB

*2 Rating conditions (heating) – indoor: 70°F DB. 60°F WB outdoor: 17°F DB. 15°F WB *3 Heating capacity and power consumption in [ ] include auxiliary electric heater operation at 208/230V.

Units should be installed by licensed electric contractor accordingly to local code requirement.

PAGE 21 OF 101 1305M221QNMAN0136

PC24GK PC30GK PC36GK PC42GK

25,000 31,000 36,500 42,500

2.61 3.18 3.62 4.10

10.4 10.0 10.3 10.8

PC24GK PC30GK PC36GK PC42GK

Munsell 0.7Y 8.59 / 0.97

115, 1, 60

2.0 3.0

1.9 2.4

710-880 990-1,240 640-810 880-1,130 51-9/16 63-3/4

26-3/4 10-5/8

82 95 99

PU24EK PU30EK PU36EK PU42EK7

Munsell 5Y 7/1 208/230, 1, 60

20 30 40 16 20 22 28

0.65+0.65 0.75+0.75 0.8+0.8

NH33NBD NH41NAD NH47NAD ZR42K3-PFV

11.5 14.0 17.5 20.4 54 73 87 109

0.16/0.17 (33/39) Capillary tube

34-1/4 38-3/16 11-5/8 13-9/16

49-9/16 207 208 220 220

With indoor unit

Indoor unit-remote controller DC12V, Indoor unit- outdoor unit DC12V

Cooling capacity *1 BTU/h Power consumption *1 kW

SEER

INDOOR UNIT MODELS

External finish Power supply V, Phase, Hz Max. fuse size (time delay) A Min. ampacity A Fan motor F. L. A.

Airflow Dry CFM Lo-Hi Wet CFM

W in Dimensions D in

H in Weight lbs

OUTDOOR UNIT MODELS

External finish Power supply V, Phase, Hz Max. fuse size (time delay) A Min. ampacity A Fan motor F. L. A.

Model Compressor R. L. A.

L. R. A.

Crankcase heater A (W) Refrigerant control

W in Dimensions D in

H in Weight lbs

REMOTE CONTROLLER

Control voltage (by built-in transformer)

Item Models

NOTES: *1 Rating conditions (cooling) – indoor: 80°F DB. 67°F WB outdoor: 95°F DB. 75°F WB

Units should be installed by licensed electric contractor accordingly to local code requirement.

PAGE 22 OF 101 1305M221QNMAN0136

5. Specifications

Cooling *1 BTU/h Capacity Heating *1,*3 BTU/h

Heating *2,*3 BTU/h Cooling *1 kW Heating *1,*3 kW Heating *2,*3 kW

SEER

HSPF

INDOOR UNIT MODELS

External finish Power supply V, Phase, Hz Max. fuse size (time delay) A Min. ampacity A Fan motor F. L. A.

Auxiliary heater A (kW) Airflow Dry CFM Lo-Hi Wet CFM

W in Dimensions D in

H in Weight lbs

OUTDOOR UNIT MODELS

External finish Power supply V, Phase, Hz Max. fuse size (time delay) A Min. ampacity A Fan motor F. L. A.

Models Compressor R. L. A.

L. R. A.

Crankcase heater A (W) Refrigerant control Defrost method

W in Dimensions D in

H in Weight lbs

REMOTE CONTROLLER

Control voltage (by built-in transformer)

Item Models

Power consumption

NOTES: *1 Rating conditions (cooling) – indoor: 80°F DB. 67°F WB outdoor: 95°F DB. 75°F WB (heating) – indoor: 70°F DB. 60°F WB outdoor: 47°F DB. 43°F WB

*2 Rating conditions (heating) – indoor: 70°F DB. 60°F WB outdoor: 17°F DB. 15°F WB *3 Heating capacity and power consumption in [ ] include auxiliary electric heater operation at 208/230V.

Units should be installed by licensed electric contractor accordingly to local code requirement.

* Specifications subject to change without notice.

PKH18FK3/PKH18FL PKH24FK3/PKH24FL PKH30FK3/PKH30FL PKH36FK3/PKH36FL

18,000 24,000 30,000 34,200

18,600 [24,100/25,100] 25,000 [30,500/31,500] 33,000 [39,100/40,500] 38,000 [44,100/45,500] 10,700 [16,200/17,200] 14,700 [20,200/21,200] 19,000 [25,100/26,500] 19,600 [25,700/27,100]

1.79 2.36 3.12 3.44

1.56 [3.16/3.46] 2.37 [3.97/4.27] 3.02 [4.82/5.22] 3.54 [5.34/5.74]

1.34 [2.94/3.24] 1.92 [3.52/3.82] 2.48 [4.28/4.68] 2.65 [4.45/4.85]

11.1 10.2 10.6 10.5

7.2 6.8 7.1 6.9

PKH18FK3/PKH18FL PKH24FK3/PKH24FL PKH30FK3/PKH30FL PKH36FK3/PKH36FL

Munsell 3.4Y 7.7/0.8

208/230, 1, 60

12 13

0.5 0.6

7.6/8.4 [1.6/1.9] 8.7/9.6 [1.8/2.2] 710-530 990-780 640-480 890-700 55-1/8 66-5/32

9-1/4 13-3/8

57 66

PKH18FK3 / PLH18FL PKH24FK3 / PKH24FL PKH30FK3 / PKH30FL PKH36FK3 / PKH36FL

Munsell 5Y 7/1 208/230, 1, 60

20 30 16 20 22

0.75 0.65+0.65 0.75+0.75

RH247NAB NH33NBD NH41NAD NH47NAD

12.0 11.5 14.0 17.5 37 54 73 87

0.11/0.12 (23/28) 0.16/0.17 (33/39) Capillary tube Reverse cycle

34-1/4 38-3/16 11-5/8 13-9/16

33-1/2 49-9/16 131 202 245 246

With indoor unit

Indoor unit-remote controller DC12V, Indoor unit- outdoor unit DC12V

PAGE 23 OF 101 1305M221QNMAN0136

12 Printed in JapanBG79P948H04

HEAD…