Form_158 Initial.pdf
PDF 68 KB Posted
- Solicitation number
- SPRTA1-26-R-0353
- Issued by
-
Defense Logistics Agency Aviation
About this file
This is a Packaging Requirements document (AFMC Form 158) issued for Purchase Instrument Number FD20302600825-00, Version 1, dated 3 February 2026. The document specifies packaging and marking standards for item 2915010376724OK under MIL-STD-129 Revision R and MIL-STD-2073-1 Revision E.
The primary requirement concerns wood packaging material (WPM) compliance with United Nations-implemented restrictions on invasive species, specifically the pinewood nematode. All wooden lumber, pallets, and containers must be constructed from debarked wood and heat-treated to 56 degrees Centigrade (133 degrees Fahrenheit) for a minimum of 30 minutes. Certification and marking by an accredited agency recognized by the American Lumber Standards Committee (ALSC) is mandatory, with reference to International Standards for Phytosanitary Measures (ISPM No. 15). The packaging requirement is classified as "MIL Long Line Packaging" at Preservation Level MIL and Packaging Level B. Specific unit pack dimensions are: 0.93 weight, 9.3 inches length, 6.3 inches width, 4.0 inches depth, and 0.135 cubic feet. Items shall be packaged per MIL-STD-2073-1 with markings per MIL-STD-129. Shipping containers require additional marking including unit serial numbers, original equipment manufacturer names, or model numbers as specified on the AFMC Form 158. The packaging specialist is Billy S. Real of the 406 SCMS/GULAA office, contactable at 405-582-9721.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Form_1653 Initial.pdf | ||
| IUID_Checklist.pdf | ||
| SPRTA126R0353_SOL.pdf | ||
| SPI_F_FW_117_2012.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PACKAGING REQUIREMENTS
PURCHASE INSTRUMENT NUMBER: FD20302600825-00 VERSION: 1
MIL-STD 129 REVISION: R MIL-STD 2073-1 REVISION: E
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES). WOODEN LUMBER, WOODEN
PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLET'S, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES" (ISPM)NO.15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
PACRN: PACKAGING REQUIREMENT: PRESERVATION LEVEL: PACKAGING LEVEL: SPI: SPI REV: SPI DATE:
AAA MIL Long Line Packaging MIL B
ITEM(S):
2915010376724OK
CODED DATA:
QUP ICQ
PRES
METH CD
PRES
MTL
WRAP
MTL
CUSH
DUNN CT
UNIT
CONT
INT
CONT UCL
SPEC
MKG
UNIT PACK
WEIGHT
UNIT PACK
LENGTH
UNIT PACK
WIDTH
UNIT PACK
DEPTH
UNIT PACK
CUBE OPI
1 AAA 41 1 09 GB NA A NS EC B ZZ 0.93 9.3 6.3 4.0 0.135 M
ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS:
SUPPLEMENTAL PACKAGING INSTRUCTION TEXT:
ITEMS W/RESIDUAL FUEL USE SPI F WF-117-2012; ZZ MARKINGS=IAW DAFI 24-602 VOL2, 2.16.6.3 -- IF APPLICABLE
VENDOR PACKAGING INSTRUCTIONS:
Military Packaging and Marking Items shall be packaged in accordance with MIL-STD-2073-1, Standard Practice for Military Packaging. Shipping and storage markings shall be in accordance with MIL-STD-129, Standard Practice for Military Marking.
Shipping Container Marking Shipping containers shall be marked meeting the following criteria: (a) MIL-STD-129, Standard Practice for Military Marking. (b) Additional marking and/or bar coding requirements exceeding those of MIL-STD-129 (e.g., unit serial numbers, original equipment manufacturers (OEM) name, or OEM model number, as specified on the AFMC Form 158.
ORGANIZATION / OFFICE SYMBOL:
406 SCMS / GULAA
PACKAGING SPECIALIST:
Real, Billy S
PHONE NUMBER:
405-582-9721 / 852-9721
SIGNATURE:
//SIGNED//Real, Billy S
DATE:
26034 - 03 FEB 2026
Page 1 of 1AFMC 158 Version 1Generated by PRPS using Jasper Reports on 12 Feb 2026
File details come from the government source that posted it. Updated .