fn1447-18_amend_3.docx

AMENDMENT OF SOLICITATION/ MODIFICATION OF CONTRACT

1. CONTRACT ID CODE

PAGE OF PAGES

2. AMENDMENT/MODIFICATION NO.

3. EFFECTIVE DATE

4. REQUISITION/PURCHASE REQ. NO.

5. PROJECT NO. (If applicable)

6. ISSUED BY

CODE

7. ADMINISTERED BY (If other than Item 6)

See Block 6

8. NAME AND ADDRESS OF CONTRACTOR (No., street, country, State and Zip Code)

(x)

9A. AMENDMENT OF SOLICITATION NO.

FN1447-18

X

9B. DATED (SEE ITEM 11)

02/ x

03/26/2018

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

FACILITY CODE

11. THIS ITEM ONLY APPLIES TO AMENDMENT OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and the date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods: (a) By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment number. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE

DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

(X)

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, Appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103 (b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF :

D. OTHER (Specify type of modification and authority)

E. IMPORTANT : Contractor is not, x is required to sign this document and return 2 copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

COMMODITY: Panels Plywood, and Particleboard SEE ATTACHED

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

Tiffani Balestrini, Contract Specialist

15B. CONTRACTOR/OFFEROR

15C. DATE SIGNED

16B. UNITED STATES OF AMERICA

16C. DATE SIGNED

BY

(Signature of the person authorized to sign)

(Signature of contracting officer)

NSN 7540-01-152-8070

PREVIOUS EDITION UNUSABLE

30-105

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA

FAR(48 CFR) 53.243

This amendment corrects the specification for the following items:

Line 21 Old Description

PNL0275-CHERRY,3/4"X4'X10',A-1,7-PLY

DESCRIPTION:CHERRY/CHERRY

UNICOR PART NUMBER: PNL0275

GRADE:A-1

FACE/BACK:PLAIN SLICED BOOKMATCHED,CHERRY

VENEER THICKNESS:1/48"

NO VISIBLE GLUE LINES ACCEPTED

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 1/16"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

ALL PANELS MUST CONFORM TO ALL

REQUIREMENTS ESTABLISHED IN HARDWOOD

PLYWOOD AND VENEER ASSOCIATION INTERIM

STANDARD HP-1 1994

CORE: PARTICLEBOARD WITH THE FOLLOWING

AVERAGE PROPERTIES BASED ON 3/4" BOARD

TO ANSI STANDARD 208.1

SCREW HOLDING, FACE- 300 LB.

SCREW HOLDING, EDGE- 250 LB.

AVERAGE DENSITY SHALL NOT BE MORE THAN

10% BELOW THE NOMINAL DENSITY AS STATED

BY THE MANUFACTURER

M.O.E.- 326300 PSI

M.O.R.- 2103 PSI

INTERNAL BOND STRENGTH- 80 PSI

THE USE OF PARTICLEBOARD

WHICH DOES NOT MEET THE

ABOVE SPECIFICATION IS NOT ACCEPTABLE

FOR USE IN OUR PRODUCTS

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

New Description

PNL0275-

CHERRY,3/4"X4'X10',A-1,7-PLY

DESCRIPTION:CHERRY/CHERRY

UNICOR PART NUMBER: PNL0275

GRADE:A-1

FACE/BACK:PLAIN SLICED BOOKMATCHED,CHERRY

VENEER THICKNESS:1/48"

NO VISIBLE GLUE LINES ACCEPTED

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 1/16"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

ALL PANELS MUST CONFORM TO ALL

REQUIREMENTS ESTABLISHED IN HARDWOOD

PLYWOOD AND VENEER ASSOCIATION INTERIM

STANDARD HP-1 1994

THE FOLLOWING Plywood

AVERAGE PROPERTIES BASED ON 3/4" BOARD

TO ANSI STANDARD 208.1

SCREW HOLDING, FACE- 300 LB.

SCREW HOLDING, EDGE- 250 LB.

AVERAGE DENSITY SHALL NOT BE MORE THAN

10% BELOW THE NOMINAL DENSITY AS STATED

BY THE MANUFACTURER

M.O.E.- 326300 PSI

M.O.R.- 2103 PSI

INTERNAL BOND STRENGTH- 80 PSI

THE USE OF Plywood

WHICH DOES NOT MEET THE

ABOVE SPECIFICATION IS NOT ACCEPTABLE

FOR USE IN OUR PRODUCTS

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

Line 23 PNL0274 Old description:

CHERRY,3/4"X4'X8',A-1,7-PLY

DESCRIPTION:CHERRY/CHERRY

UNICOR PART NUMBER: PNL0274

GRADE:A-1

FACE/BACK:PLAIN SLICED BOOKMATCHED,CHERRY

VENEER THICKNESS:1/48"

NO VISIBLE GLUE LINES ACCEPTED

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 1/16"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

ALL PANELS MUST CONFORM TO ALL

REQUIREMENTS ESTABLISHED IN HARDWOOD

PLYWOOD AND VENEER ASSOCIATION INTERIM

STANDARD HP-1 1994

CORE: PARTICLEBOARD WITH THE FOLLOWING

AVERAGE PROPERTIES BASED ON 3/4" BOARD

TO ANSI STANDARD 208.1

SCREW HOLDING, FACE- 300 LB.

SCREW HOLDING, EDGE- 250 LB.

AVERAGE DENSITY SHALL NOT BE MORE THAN

10% BELOW THE NOMINAL DENSITY AS STATED

BY THE MANUFACTURER

M.O.E.- 326300 PSI

M.O.R.- 2103 PSI

INTERNAL BOND STRENGTH- 80 PSI

THE USE OF PARTICLEBOARD

WHICH DOES NOT MEET THE

ABOVE SPECIFICATION IS NOT ACCEPTABLE

FOR USE IN OUR PRODUCTS

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

New Description PNL0274

CHERRY,3/4"X4'X8',A-1,7-PLY

DESCRIPTION:CHERRY/CHERRY

UNICOR PART NUMBER: PNL0274

GRADE:A-1

FACE/BACK:PLAIN SLICED BOOKMATCHED,CHERRY

VENEER THICKNESS:1/48"

NO VISIBLE GLUE LINES ACCEPTED

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 1/16"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

ALL PANELS MUST CONFORM TO ALL

REQUIREMENTS ESTABLISHED IN HARDWOOD

PLYWOOD AND VENEER ASSOCIATION INTERIM

STANDARD HP-1 1994

CORE: Plywood WITH THE FOLLOWING

AVERAGE PROPERTIES BASED ON 3/4" BOARD

TO ANSI STANDARD 208.1

SCREW HOLDING, FACE- 300 LB.

SCREW HOLDING, EDGE- 250 LB.

AVERAGE DENSITY SHALL NOT BE MORE THAN

10% BELOW THE NOMINAL DENSITY AS STATED

BY THE MANUFACTURER

M.O.E.- 326300 PSI

M.O.R.- 2103 PSI

INTERNAL BOND STRENGTH- 80 PSI

THE USE OF Plywood

WHICH DOES NOT MEET THE

ABOVE SPECIFICATION IS NOT ACCEPTABLE

FOR USE IN OUR PRODUCTS

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

Line 27 PNL2839 Old description

WALNUT/WALNUT,3/4"X4'X8',A/C,9-PLY

WALNUT/WALNUT,3/4"X4'X8',A/C,9-PLY

UNICOR PART NUMBER: PNL2839

GRADE:A/C VENEER SIZE:3/4"X4'X8'

J-GRADE INNER PLY BLACK WALNUT VENEER

MANUFACTURED ACCORDING TO HPMA HP-1 1992

,ANSI A208, 2-1994 AND FEDERAL

SPECIFICATION AA-T-00633

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 1/16"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

ALL PANELS MUST CONFORM TO ALL

REQUIREMENTS ESTABLISHED IN HARDWOOD

PLYWOOD AND VENEER ASSOCIATION INTERIM

STANDARD HP-1 1994

CORE: Plywood WITH THE FOLLOWING

AVERAGE PROPERTIES BASED ON 3/4" BOARD

TO ANSI STANDARD 208.1

SCREW HOLDING, FACE- 300 LB.

SCREW HOLDING, EDGE- 250 LB.

AVERAGE DENSITY SHALL NOT BE MORE THAN

10% BELOW THE NOMINAL DENSITY AS STATED

BY THE MANUFACTURER

M.O.E.- 326300 PSI

M.O.R.- 2103 PSI

INTERNAL BOND STRENGTH- 80 PSI

THE USE OF Plywood

WHICH DOES NOT MEET THE

ABOVE SPECIFICATION IS NOT ACCEPTABLE

FOR USE IN OUR PRODUCTS

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

CONFORMANCE

NOT MEETING SPECIFICATIONS ARE SUBJECT TO REJECTION

Line 28 PNL2875 Old description

WALNUT/WALNUT,3/4"X8'X4'CROSS-GRAIN

WALNUT/WALNUT,3/4"X8'X4'CROSS-GRAIN

A/C,9 PLY GRADE:A/C VENEER SIZE:3/4"X8'X4 CROSS GRAIN,

J-GRADE' INNER PLY BLACK WALNUT VENEER

UNICOR PART NUMBER: PNL2875

MANUFACTURED ACCORDING TO HPMA HP-1 1992

,ANSI A208, 2-1994 AND FEDERAL

SPECIFICATION AA-T-00633

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 1/16"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

ALL PANELS MUST CONFORM TO ALL

REQUIREMENTS ESTABLISHED IN HARDWOOD

PLYWOOD AND VENEER ASSOCIATION INTERIM

STANDARD HP-1 1994

CORE: PARTICLEBOARD WITH THE FOLLOWING

AVERAGE PROPERTIES BASED ON 3/4" BOARD

TO ANSI STANDARD 208.1

SCREW HOLDING, FACE- 300 LB.

SCREW HOLDING, EDGE- 250 LB.

AVERAGE DENSITY SHALL NOT BE MORE THAN

10% BELOW THE NOMINAL DENSITY AS STATED

BY THE MANUFACTURER

M.O.E.- 326300 PSI

M.O.R.- 2103 PSI

INTERNAL BOND STRENGTH- 80 PSI

THE USE OF PARTICLEBOARD

WHICH DOES NOT MEET THE

ABOVE SPECIFICATION IS NOT ACCEPTABLE

FOR USE IN OUR PRODUCTS

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

New description-PNL2875

WALNUT/WALNUT,3/4"X8'X4'CROSS-GRAIN

WALNUT/WALNUT,3/4"X8'X4'CROSS-GRAIN

A/C,9 PLY GRADE:A/C VENEER SIZE:3/4"X8'X4 CROSS GRAIN,

J-GRADE' INNER PLY BLACK WALNUT VENEER

UNICOR PART NUMBER: PNL2875

MANUFACTURED ACCORDING TO HPMA HP-1 1992

,ANSI A208, 2-1994 AND FEDERAL

SPECIFICATION AA-T-00633

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 1/16"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

ALL PANELS MUST CONFORM TO ALL

REQUIREMENTS ESTABLISHED IN HARDWOOD

PLYWOOD AND VENEER ASSOCIATION INTERIM

STANDARD HP-1 1994

CORE: Plywood WITH THE FOLLOWING

AVERAGE PROPERTIES BASED ON 3/4" BOARD

TO ANSI STANDARD 208.1

SCREW HOLDING, FACE- 300 LB.

SCREW HOLDING, EDGE- 250 LB.

AVERAGE DENSITY SHALL NOT BE MORE THAN

10% BELOW THE NOMINAL DENSITY AS STATED

BY THE MANUFACTURER

M.O.E.- 326300 PSI

M.O.R.- 2103 PSI

INTERNAL BOND STRENGTH- 80 PSI

THE USE OF Plywood

WHICH DOES NOT MEET THE

ABOVE SPECIFICATION IS NOT ACCEPTABLE

FOR USE IN OUR PRODUCTS

REJECTED PANELS TO

BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

Line 30 PNL5059

Old description

WALNUT/WALNUT,1-1/2"X4'X8',A/A,18-PLY

WALNUT/WALNUT,1-1/2"X4'X8',A/A,18-PLY

UNICOR PART NUMBER: PNL5059

GRADE:A/A VENEER SIZE:1-1/2"X4'X8'

J-GRADE INNER PLY BLACK WALNUT VENEER

MANUFACTURED ACCORDING TO HPMA HP-1 1992

,ANSI A208, 2-1994 AND FEDERAL

SPECIFICATION AA-T-00633

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 1/16"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

ALL PANELS MUST CONFORM TO ALL

REQUIREMENTS ESTABLISHED IN HARDWOOD

PLYWOOD AND VENEER ASSOCIATION INTERIM

STANDARD HP-1 1994

CORE: PARTICLEBOARD WITH THE FOLLOWING

AVERAGE PROPERTIES BASED ON 3/4" BOARD

TO ANSI STANDARD 208.1

SCREW HOLDING, FACE- 300 LB.

SCREW HOLDING, EDGE- 250 LB.

AVERAGE DENSITY SHALL NOT BE MORE THAN

10% BELOW THE NOMINAL DENSITY AS STATED

BY THE MANUFACTURER

M.O.E.- 326300 PSI

M.O.R.- 2103 PSI

INTERNAL BOND STRENGTH- 80 PSI

THE USE OF PARTICLEBOARD

WHICH DOES NOT MEET THE

ABOVE SPECIFICATION IS NOT ACCEPTABLE

FOR USE IN OUR PRODUCTS

REJECTED PANELS TO BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT

BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

New Description PNL5059

WALNUT/WALNUT,1-1/2"X4'X8',A/A,18-PLY

WALNUT/WALNUT,1-1/2"X4'X8',A/A,18-PLY

UNICOR PART NUMBER: PNL5059

GRADE:A/A VENEER SIZE:1-1/2"X4'X8'

J-GRADE INNER PLY BLACK WALNUT VENEER

MANUFACTURED ACCORDING TO HPMA HP-1 1992

,ANSI A208, 2-1994 AND FEDERAL

SPECIFICATION AA-T-00633

TOLERANCE:DIMENSIONS: (+/-) 1/32"

SQUARENESS:PANELS,DIAGONAL MEASURE,

LARGER THAN 48"X48" (+/-) 1/16"

SMALLER THAN 48"X48" (+/-) 1/16"

EACH SHIPMENT OF PANELS MUST BE

ACCOMPANIED BY A SIGNED CERTIFICATE OF

COMPLIANCE REFERENCING LABORATORY TEST

DATA FOR THAT SHIPMENT

ALL PANELS MUST CONFORM TO ALL

REQUIREMENTS ESTABLISHED IN HARDWOOD

PLYWOOD AND VENEER ASSOCIATION INTERIM

STANDARD HP-1 1994

CORE: Plywood WITH THE FOLLOWING

AVERAGE PROPERTIES BASED ON 3/4" BOARD

TO ANSI STANDARD 208.1

SCREW HOLDING, FACE- 300 LB.

SCREW HOLDING, EDGE- 250 LB.

AVERAGE DENSITY SHALL NOT BE MORE THAN

10% BELOW THE NOMINAL DENSITY AS STATED

BY THE MANUFACTURER

M.O.E.- 326300 PSI

M.O.R.- 2103 PSI

INTERNAL BOND STRENGTH- 80 PSI

THE USE OF Plywood

WHICH DOES NOT MEET THE

ABOVE SPECIFICATION IS NOT ACCEPTABLE

FOR USE IN OUR PRODUCTS

REJECTED PANELS TO BE REMOVED AT SUPPLIER'S EXPENSE AND REPLACED AT

BUYER'S REQUEST

DELIVERIES WILL NOT BE ACCEPTED WITHOUT A SIGNED CERTIFICATE OF

Except as provided herein, all other terms and conditions remain unchanged.