Flat Discharge Belt Conveyor Package Specifications.docx
DOCX document 14 KB Posted
- Attached to
- Amendment 0001 - Discharge Belt Conveyor
- Solicitation number
- 12405B22Q0308
View the file
Other files
| File | Type | Posted |
|---|---|---|
| QandA sol.docx | DOCX document | |
| Discharge Belt Conveyor pic.pdf | ||
| Commercial Items Clauses.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Flat Belt Conveyor Package
Flat Discharge Belt Conveyor. Must be same in form, fit and function as indicated per included specifications.
Modular Flat Belt, side rail, straight conveyor, 48" (1219mm) nominal width x 15' (4572mm) long with 3” side profile and modular belt type MP flat (closed) top polypropylene. Conveyor has a standard infeed and discharge tail with drive shaft in position D. Note: Usable belt width is 47.24" +/-. Includes recommended number of mounting brackets. Or comparable.
Heavy duty load side motor mounting package for an end drive conveyor, mounted in the D position. Or comparable.
Heavy load 90° shaft eDrive™ variable speed VFD gearmotor, 230/460 volt, 3 phase, 6-60 Hz, 173 RPM, providing a belt speed of 43 - 173 ft/min (13 - 53 m/min). Or comparable.
Full feature VFD variable speed controller, 460V, 3 phase, 60 Hz input, 460VAC output, for required horsepower. Or comparable.
| 3 |
| Supports for belt height of 12”. |
Conveyor is not reversible. Above conveyor load capacity is 5 lbs. per square foot not to exceed a maximum conveyor load of 20 lbs. per square foot . The conveyor incline is 0 degrees and a non-accumulated load. Stand support components will provide an infeed belt height of 12" and a discharge belt height of 12".
File details come from the government source that posted it. Updated .