First Article Test Reports CDRL - A001.pdf
PDF 233 KB Posted
- Attached to
- Bearing Assembly & Weld Assembly
- Solicitation number
- SPRHA2-26-R-0063
- Issued by
-
Defense Logistics Agency Aviation
About this file
This is a DD Form 1423-1, Contract Data Requirements List, specifying data delivery requirements for a single data item under contract line items CLIN0002 and CLIN0004.
The contractor must deliver a Test/Inspection Report (Data Item A001) for two components: the Bearing Assembly (NIIN 015000121) and Piston Weld Assembly (NIIN 015000122). The report must comply with standard DI-NDTI-80809B and be submitted to the 414th Supply Chain Management Squadron/GUEA (Requiring Office) in draft, final, and reproduction formats. First Article Testing (FAT) is required. Per the authority document, all dimensions and tolerances from manufacturing data must be listed in one column with corresponding actual inspection readings in another column. Materials used in the First Article must be identified, certified, and accompanied by material purchase requirements documentation. Material processing details—including finish requirements such as plating, heat treatment, welding, anodizing, and painting—must be identified and certified as conforming to applicable requirements, with purchase order copies included for processes performed at facilities other than the contractor's. Submission of all FAT documents is required via DOD Safe to Andrew Shupe (andrew.shupe.1@us.af.mil) and Blake Preece (blake.preece@us.af.mil). The frequency is one-time submission as of the ASGEN date, with no subsequent submissions required. The estimated total price is $0.00, and the price group is NSP (No Special Pricing).
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 1423-1, FEB 2001
CONTRACT DATA REQUIREMENTS LIST
(1 Data Item)
PREVIOUS EDITION MAY BE USED.
Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.
A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:
TDP ________ TM _______ OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE
4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
7. DD 250 REQ
8. APP CODE
9. DIST STATEMENT
REQUIRED
10. FREQUENCY
11. AS OF DATE
12. DATE OF FIRST SUBMISSION
13. DATE OF SUBSEQUENT
SUBMISSION
14. DISTRIBUTION
a. ADDRESSEE
b. COPIES
Draft Final
Reg Repro
15. TOTAL
16. REMARKS
17. PRICE GROUP
18. ESTIMATED
TOTAL PRICE
G. PREPARED BY H. DATE I. APPROVED BY J. DATE
Page of Pages
CLIN0002, CLIN0004 A X-NDTI
Bearing Assembly; Piston Weld Assembly
A001 Test/Inspection Report
DI-NDTI-80809B 414SCMS/GUEA
DD
D
ONE/R
NA
ASGEN
ASGEN
See Block 16 1
0 1 0
Block D:
Bearing Assembly, NIIN: 015000121 Piston Weld Assembly, NIIN: 015000122
FAT is required as as indicated below;
Block 4: Paragraph 10.2 of DI-NDTI-80809B clarified as follows:
a. All dimensions and tolerances specified on the manufacturing data shall be listed in one column, with the actual corresponding reading obtained from the inspection of the part listed in another column.
b. Materials used in the manufacture of the "First Article" shall be identified and certified along with a copy of material purchase requirements as conforming to applicable data requirements.
c. Material processing, including finish requirements (plating, heat treatment, welding, anodizing, painting, etc.) utilized in the manufacture of "First Article" item shall be identified and certified as conforming to applicable requirements. A copy of the purchase order certifying the process accomplished at other than contractor facility shall be included.
Block 14: Submit all FA documents via DOD Safe to:
Andrew Shupe, Engineer andrew.shupe.1@us.af.mil
Blake Preece, LMS blake.preece@us.af.mil
NSP
0.00
SHUPE.ANDREW.K.1535624450
Digitally signed by
SHUPE.ANDREW.K.1535624450
Date: 2026.02.05 12:07:16 -07'00'
PREECE.BLAKE.A.1400977
Digitally signed by
PREECE.BLAKE.A.1400977034
Date: 2026.02.05 13:02:55 -07'00'
2026/02/05
Adobe Professional 8.0
CONTRACT DATA REQUIREMENTS LIST
(1 Data Item)
A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:
TDP ________ TM _______ OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
16. REMARKS (Continued)
DD FORM 1423-1, FEB 2001 Page of Pages
CLIN0002, CLIN0004 A X-NDTI
Bearing Assembly; Piston Weld Assembly
File details come from the government source that posted it. Updated .