Final_RFB_605_2700000231_1_SO_FORM.PDF

PDF 497 KB Posted

Attached to
Furnishing and Installing Roadway Sheeting Signs - D7
Solicitation number
RFB 605 2700000231 1
Issued by
Fayette County, Kentucky

About this file

Summary of RFB 605 2700000231

This Request for Bid (RFB) is issued by the Commonwealth of Kentucky Transportation Cabinet Division of Purchases on behalf of the Kentucky Department of Transportation (KYTC) for furnishing and installing roadway sheeting signs in District 7, which encompasses Anderson, Bourbon, Boyle, Clark, Fayette, Garrard, Jessamine, Madison, Mercer, Montgomery, Scott, and Woodford counties. The solicitation encompasses fifty-four line items covering a comprehensive range of sign installation services, including reinstalling existing signs and posts, removing existing assemblies, repairing various breakaway slip base systems, installing concrete surface mount systems, anchoring sign posts to barrier walls, installing signs on utility poles, furnishing and installing various types of sign posts in multiple dimensions, installing aluminum sign bracing, and manufacturing and installing regulatory, warning, guide information, and service signs in various sizes and sheeting types. Additionally, the contract includes specialized services such as hydro excavation truck rental, overhead assembly installation for mast arms and span wires, and interstate grade separator system installation. The deadline for submitting written questions is November 23, 2026, with responses expected by November 27, 2026. Bids are due electronically by 1:30 p.m. Eastern Time on December 4, 2026, with a tentative award date of December 10, 2026. The initial contract period runs from award through October 31, 2027, with four optional one-year renewal periods available at the discretion of both parties.

Pricing shall be submitted on a unit cost basis for each line item, with pricing remaining firm for the initial twelve-month contract period. After twelve months, price increases may be requested with written justification based on industry-wide price changes and must be submitted at least thirty days in advance. The contractor must immediately notify KYTC of any price decreases. Payment terms require submission of invoices to the agency contact person within thirty working days of receipt and acceptance of goods or services, with invoices subject to late payment penalties of one percent monthly if payment is delayed beyond thirty working days. All materials, labor, and equipment shall be furnished by the contractor and must conform to Kentucky Standard Specifications for Road and Bridge Construction, 2019 Edition, the Manual on Uniform Traffic Control Devices (MUTCD) 2023 Edition, and Standard Highway Signs guidelines. The contractor must maintain Commercial General Liability Insurance with minimum limits of $1,000,000 per occurrence and $2,000,000 aggregate, along with applicable automobile liability and workers' compensation insurance. No set-asides are indicated in this solicitation. The contract may be extended to other state agencies and political subdivisions with vendor consent, with all billing and payments made directly between user agencies and the vendor.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Document ID: RFB 605 2700000231 Page: 1

Commonwealth of Kentucky

SOLICITATION

Modification: No Version #:

TITLE: Furnishing and Installing Roadway Sheeting Signs - D7

Date Issued:

11/17/2026 Record Date:

11/17/2026

Solicitation Closes Date:

12/04/2026 Time:

13:30

Solicitation No:

RFB 605 2700000231

Online Bidding Prohibited: No

For Information Call:

Tiffany Kiser 502-782-3974

Bid Receiving Location:

Bid Receiving

See Terms & Conditions for Bid Submission Instructions

Other KY

Vendor Customer Number:

Vendor Name:

Phone Number:

Fax Number:

Email Address:

Ordering

Address:

City, State, Zip:

Contact Name:

Contact Email:

Contact Phone Number:

Payment

Address:

City, State, Zip:

Contact Name:

Contact Email:

Contact Phone Number:

Ownership Type

__ Sole Proprietorship __ Partnership __ Corporation __ Other_________________________

SIGNATURE OF AUTHORIZED AGENT IS REQUIRED UNLESS RESPONSE

IS SUBMITTED ELECTRONICALLY. FAILURE TO SIGN SHALL RENDER

THE BID INVALID.

Signature X_________________________________________ FEIN#____________________ Date____________

All offers subject to all terms and conditions contained in this solicitation.

Document ID: RFB 605 2700000231 Page: 2

Line Items

Commodity Group: Default Commodity Group

Line CL Description Quantity UOM Unit Cost Line Total or Contract Amnt

1 Reinstall Existing Sign 200.00000 EA

Comm Code Comm Description Manufacturer Model # Manuf Part #

96880 Traffic Sign Installation and/or Removal Services

Extended Description See Terms and Conditions ***ONLY ONLINE BIDS WILL BE ACCEPTED FOR THIS RFB.*** Emailed and hard copies delivered by any method WILL NOT BE ACCEPTED.

See attached document How to Respond to an Online Bid through the Kentucky Vendor Self Service site (updated).pdf.

Please enter contact person, phone number and email in the Comments Section.

Vendors should review and update, if necessary, all addresses and contact persons for their account prior to bid submission. This information will carry forward to a contract if awarded, therefore please ensure all information is correct.

2 Reinstall Existing Post 100.00000 EA

3 Remove Existing Signs and Assembly 250.00000 EA

Document ID: RFB 605 2700000231 Page: 3

4 Repair Type D Omni-Directional Breakaway Slip Base

40.00000 EA

See Terms and Conditions.

Vendor shall Furnish and Install.

5 Repair Concrete Surface Mount System 40.00000 EA

6 Install Bar Code and Data File 1500.00000 EA

7 Anchor Installation Thru Concrete or Asphalt 50.00000 EA

Document ID: RFB 605 2700000231 Page: 4

8 Concrete Surface Mount System 50.00000 EA

9 Anchor Sign Post to the Barrier Wall 50.00000 EA

10 Luminary, Utility or Signal Pole Installation of Sign

400.00000 EA

Document ID: RFB 605 2700000231 Page: 5

11 12 Gage Anchor with 10 Gage Soil Stabilizer 450.00000 EA

3' x 2.25" x 2.25" For Type I Post with 10 Gage Soil Stabilizer.

12 Type D Omni-Directional Breakaway Slipbase and Anchor

75.00000 EA

13 7 Gage Heavy Duty Anchor 75.00000 EA

7 Gage Heavy Duty Anchor 3" x 3" x 48" for Type I Post (2.50" x 2.50").

Document ID: RFB 605 2700000231 Page: 6

14 7 Gage Heavy Duty WINGED Anchor 25.00000 EA

7 Gage Heavy Duty WINGED (Soil Stabilizer) Anchor 3" x 3" x 36" for Type I Post (2.50" x 2.50").

15 7 Gage Quick Drive Anchor 25.00000 EA

7 Gage Quick Drive Anchor 3" x 3" x 36" for Type I Post (2.50" x 2.50").

16 8" Triangular Slip Base Bottom Insert and Top Half

20.00000 EA

8" Triangular Slip Base Bottom Insert for Heavy Duty Anchors and 8" Top Half Post Receiver for Type I Post (2.50" x 2.50"). To be used with line items 13 and 14.

Document ID: RFB 605 2700000231 Page: 7

17 12 Gage Square Post Type I 8' x 2" x 2" 80.00000 EA

18 12 Gage Square Post Type I 10' x 2" x 2" 200.00000 EA

19 12 Gage Square Post Type I 12' x 2" x 2" 200.00000 EA

20 12 Gage Square Post Type I 14' x 2" x 2" 200.00000 EA

Document ID: RFB 605 2700000231 Page: 8

21 12 Gage Square Post Type I 16' x 2" x 2" 75.00000 EA

22 12 Gage Square Post Type I VAR x 2.50" x 2.50"

3000.00000 LFT

12 Gage Square Post Type I VAR x 2.50" x 2.50" To be used with line items 12 thru 15. See Terms and Conditions.

23 12 Gage Square Post Type I VAR x 2.25" x 2.25"

400.00000 LFT

12 Gage Square Post Type I VAR x 2.25" x 2.25" To be used with line item 22.

24 Aluminum Sign Bracing 4000.00000 LFT

Document ID: RFB 605 2700000231 Page: 9

25 Reflective Sign Post Panel 3" x 60" 20.00000 EA

26 Reflective Sign Post Panel 3" x 72" 20.00000 EA

27 Adjustable Chevron Bracket 20.00000 EA

Document ID: RFB 605 2700000231 Page: 10

28 Regulatory Sign less than or equal to 36" 800.00000 SQFT

Regulatory Sign less than or equal to 36" in width and height (0.080 Gage, Type XI Sheeting).

29 Regulatory Sign greater than 36" 600.00000 SQFT

Regulatory Sign greater than 36" in width or height (0.125 Gage, Type XI Sheeting).

30 Custom Regulatory Sign less than or equal to 36"

20.00000 SQFT

Custom Regulatory Sign less than or equal to 36" in width and height (0.080 Gage, Type XI Sheeting).

31 Custom Regulatory Sign greater than 36" 20.00000 SQFT

Custom Regulatory Sign greater than 36" in width or height (0.125 Gage, Type XI Sheeting).

Document ID: RFB 605 2700000231 Page: 11

32 Warning Sign less than or equal to 36" Black/ Yellow

500.00000 SQFT

Warning Sign less than or equal to 36" in width and height (0.080 Gage, Type XI Sheeting, Black/Yellow).

33 Warning Sign less than or equal to 36" Black/ Fluorescent

500.00000 SQFT

Warning Sign less than or equal to 36" in width and height (0.080 Gage, Type XI Sheeting, Black/Fluorescent).

34 Warning Sign greater than 36" Black/Yellow 600.00000 SQFT

Warning Sign greater than 36" in width or height (0.125 Gage, Type XI Sheeting, Black/Yellow).

Document ID: RFB 605 2700000231 Page: 12

35 Warning Sign greater than 36" Black/

600.00000 SQFT

Warning Sign greater than 36" in width or height (0.125 Gage, Type XI Sheeting, Black/Fluorescent).

36 Custom Warning Sign less than or equal to 36" Black/Yellow

Custom Warning Sign less than or equal to 36" in width and height (0.080 Gage, Type XI Sheeting, Black/Yellow).

37 Custom Warning Sign less than or equal to 36" Black/Fluor.

Custom Warning Sign less than or equal to 36" in width and height (0.080 Gage, Type XI Sheeting, Black/Fluorescent).

38 Custom Warning Sign greater than 36" Black/ Yellow

350.00000 SQFT

Custom Warning Sign greater than 36" in width or height (0.125 Gage, Type XI Sheeting, Black/Yellow).

Document ID: RFB 605 2700000231 Page: 13

39 Custom Warning Sign greater than 36" Black/

Custom Warning Sign greater than 36" in width or height (0.125 Gage, Type XI Sheeting, Black/Fluorescent).

40 Type 1 and 4 Object Markers 18" x 18" 20.00000 EA

Vendor shall furnish and install Type 1 and 4 Object Markers 18" x 18" with nine retroreflective devices.

Type XI Sheeting.

41 Type 2 Object Markers 6" x 12" 20.00000 EA

Vendor shall furnish and install Type 2 Object Markers 6" x 12" with three retroreflective devices.

Document ID: RFB 605 2700000231 Page: 14

42 Interstate Route Sign Kentucky 24" x 24" 50.00000 EA

Vendor shall furnish and install Interstate Route Sign Kentucky 24" x 24".

43 Interstate Route Sign Kentucky 36" x 36" 30.00000 EA

Vendor shall furnish and install Interstate Route Sign Kentucky 36" x 36".

44 Guide Information and Service Sign less than or equal to 36"

2000.00000 SQFT

Vendor shall furnish and install Guide Information and Service Sign less than or equal to 36" in width and height (0.080 Gage, Type XI Sheeting).

45 Guide Information and Service Sign greater than 36"

1500.00000 SQFT

Vendor shall furnish and install Guide Information and Service Sign greater than 36" in width or height (0.125 Gage, Type XI Sheeting).

Document ID: RFB 605 2700000231 Page: 15

46 Custom Guide Sign less than or equal to 36" 200.00000 SQFT

Vendor shall furnish and install Custom Guide Sign less than or equal to 36" in width and height (0.080 Gage, Type XI Sheeting).

47 Custom Guide Sign greater than 36" 1500.00000 SQFT

Vendor shall furnish and install Custom Guide Sign greater than 36" in width or height (0.125 Gage, Type XI Sheeting).

48 Type D Slip Base Surface Mount for 2.5" Post 100.00000 EA

Type D Slip Base Surface Mount for 2.5" Post

Will be billed for each unit of install. Post will be separate.

Document ID: RFB 605 2700000231 Page: 16

49 4" Type D Slip Base Anchor 25.00000 EA

4" Type D Slip Base Anchor

These are 4" Squared by 48" Long anchors that are on experimental list. To be used in Gore Areas at all times. All clamps for securing signs will be incidental to install.

See terms and conditions.

50 4" Type D Slip Base Anchor 1000.00000 LF

4" Square Post

51 4" Square Type D Repair Kit and Install 50.00000 EA

4" Square Type D Repair Kit and Install

To be billed as material and installation of Kit

Document ID: RFB 605 2700000231 Page: 17

52 Hydro Excavation Truck 50.00000 HOUR

Hydro Excavation Truck

To be billed per hour. Will be a minimum 4-hour usage. Will only be used in high utility areas where drilling cannot be performed

53 Overhead Assembly Install for Mast Arms and Span Wires

10.00000 EA

Overhead Assembly Install for Mast Arms and Span Wires

Mounts, brackets and necessary hardware shall be provided by the state. To be billed per sign assembly and not per sign.

54 Interstate Grade Separator System (install only) 3000.00000 LF

Interstate Grade Separator System (install only)

This will be billed per linear foot of install. Material will be provided by the state.

Shipping Information KYTC Project Site

Project Site

Billing Information KYTC District 7 - Lexington District Office

800 Newtown Court

Document ID: RFB 605 2700000231 Page: 18

N/A KY

PO Box 11127 Lexington KY 40511

Document ID: RFB 605 2700000231 Page: 19

Submission Checklist

The following items will be required to be submitted with bid:

Item Bidder with the best pricing receives the maximum score.

Bidder with the best response time receives the maximum points.

ELECTRONIC BID SUBMISSION

Bid responses shall be received by electronic submission in the eProcurement system.

Link: https://vss.ky.gov

An electronic bid shall be authorized by the proper agent of the firm by the act of submitting it electronically through the eProcurement system.

Bid information MUST be completed online. Response must contain all required information for the Solicitation.

All bidders MUST be registered in the Commonwealth eProcurement System via the Vendor Self Service System at https://vss.ky.gov

Allow 24 – 48 hours to complete Vendor Registration. Vendors must be logged in to their Vendor Self Service (VSS) account in order to submit a response. Registrations completed the day of bid closing must be completed by the Vendor in the VSS portal. The Customer Resource Center is not able to complete registrations and activate accounts on the same day. Closing dates will not be extended for Vendors not registered by the date/time of the bid closing. Vendor Self Registration Guides are provided at https://finance.ky.gov/eProcurement/Pages/doing-business-with-the-commonwealth.aspx

All bidders are cautioned to begin their electronic submission in sufficient time to complete before the closing date and time. Delays due to technical difficulties or document upload impediments shall not be justification for acceptance of a late bid or proposal. Vendor attention to this advisory is encouraged. If you need assistance, please contact the Customer Resource Center (CRC) by email at Finance.CRCGroup@ky.gov or phone 502-564-9641 or toll-free 877-973-HELP (4357).

BID PRICES SUBMITTED ON COMPANY QUOTE FORMS ARE DISCOURAGED. COMPANY TERMS AND

CONDITIONS AND/OR SALES AND USE AGREEMENTS OFTEN CONFLICT WITH STANDARD SOLICITATION

REQUIREMENTS AND MAY RESULT IN REJECTION OF BID OFFER.

Online bid responses must be in an “Accepted” status and shall be assigned a date and time stamp from the eProcurement system at the time of final acceptance and formal submission by the vendor. The system will not allow submission of an online response after the published date and time for closing.

An offer may be modified or withdrawn by electronic or written notice ONLY if received prior to the bid closing date and time. An electronic offer may be modified by applying the appropriate electronic signature and following the procedure in the state’s eProcurement signature.

PUBLIC BID READINGS

Any person wishing to hear a bid reading may call our conference line at 502-564-4495, Enter the Conference ID Code 240522126# and

Participant Code 228420#, at 3:00 pm, Eastern Time on the bid closing date.

BID SUBMISSION CHECKLIST

The vendor MUST include the following with the bid submission. If the items below are not submitted with the bid, the Commonwealth MUST deem the bid non-responsive and SHALL NOT be considered for award.

_____ BID INFORMATION – COMPLETED (See Section 5.00)

All other items MUST be submitted prior to award however, vendors are strongly encouraged to include with bid submission.

Document Phase Document Description Page 20

2700000231 Final Furnishing and Installing Roadway Sheeting Signs - D7

Total Pages: 50 https://vss.ky.gov https://vss.ky.gov https://finance.ky.gov/eProcurement/Pages/doing-business-with-the-commonwealth.aspx https://finance.ky.gov/eProcurement/Pages/doing-business-with-the-commonwealth.aspx mailto:Finance.CRCGroup@ky.gov

_____ CERTIFICATE OF AUTHORITY – REGISTRATION WITH SECRETARY OF STATE BY FOREIGN

ENTITY (See Section 2.25)

_____ REQUIRED AFFIDAVIT(S) (See Attachments A, B, C, etc. as applicable)

_____ CERTIFICATE OF INSURANCE (See Section 1.05)

_____ EQUIPMENT SPECIFICATION/PRODUCT LITERATURE

_____ OTHER REQUIRED DOCUMENTS

PLEASE READ THIS SOLICITATION AND ITS INSTRUCTIONS IN ITS ENTIRETY.

This is a Request for Bid (RFB).

Vendors shall comply with the terms and conditions stated in the solicitation.

Any efforts to negotiate these terms and conditions SHALL NOT be accepted and SHALL cause the bid to be deemed non-responsive.

Vendors should review and comply with the general bidding requirements listed under “Procurement Laws, Preference, Regulations and Policies” and “Response to Solicitation” located on the eProcurement Web page at https://finance.ky.gov/eProcurement/Pages/procurement-laws-regulations-and-policies.aspx and https://finance.ky.gov/eProcurement/Pages/doing-business-with-the-commonwealth.aspx respectively. The vendor must comply with all applicable statutes, regulations and policies related to this procurement.

Section 1 - Scope of Work - Service

1.00 - Specifications of Service Requirements

1.00 - Specifications of Service Requirements This contract is for furnishing and installing roadway signs in District 7 (Anderson, Bourbon, Boyle, Clark, Fayette, Garrard, Jessamine, Madison, Mercer, Montgomery, Scott, and Woodford counties).

The vendor shall provide all materials, labor, and equipment necessary for placement of roadway sheeting signs and posts, unless otherwise noted in the bid items.

1.01– Materials All hardware including, but not limited to, bolts, nuts, washers, fasteners, fittings, and clamps shall be new, furnished by the contractor, and be incidental to the unit cost.

All sign, anchor, and post materials shall be new and conform to the Kentucky Standard Specifications for Road and Bridge Construction, 2019 Edition, unless otherwise noted.

The Standard Specifications can be found at: https://transportation.ky.gov/Construction/ StdSpecsWSupplSpecs/2019%20Standard%20Spec%20with%20Supplemental%20Spec%20July %202019.pdf#search=2019%20standard%20spec

All sign posts shall be Type I and conform to Section 832.

All sign blanks shall be aluminum and conform to Section 833.

All retroreflective sheeting shall conform to Section 830.

All sign designs and sign blanks shall conform to the Standard Highway Signs - FHA, 2004 Edition and the 2012 SHS Supplement to the 2004 Edition unless otherwise noted. The publications can be found at http:// mutcd.fhwa.dot.gov/ser-shs_millennium.htm.

All sign blank holes shall be punched by the sign manufacturer with a 3/8” hole diameter. Sign blanks for GUIDE SIGNS shall be punched for a “Universal Mount”, either a vertical or horizontal installation. Sign blanks shall conform to the “Blank Standards” section of the Standard Highway Signs – FHA, 2004 Edition. If a blank size is not

Document Phase Document Description Page 21

2700000231 Final Furnishing and Installing Roadway Sheeting Signs - D7

Total Pages: 50 https://finance.ky.gov/eProcurement/Pages/procurement-laws-regulations-and-policies.aspx https://finance.ky.gov/eProcurement/Pages/doing-business-with-the-commonwealth.aspx specified, then the vendor/sign manufacturer shall work with KYTC District 7 to determine a standard hole spacing for the sign blank.

Contrary to the Standard Highway Signs Manual, the 36”x36” Interstate Shield (M1-1) blank shall have four holes (24” apart) for a two post assembly or a single post assembly with sign bracing.

All retroreflective sheeting materials shall be fabricated and assembled in accordance with the manufacturer’s specifications and/or recommendations. All manufactured sheeting signs shall be free of visual defects including, but not limited to, scratches, cracks, tears, ridges, humps, discoloration, etc. Defective signs shall be replaced at no additional cost to the Department. Multiple signs on the same assembly shall have matching sheeting colors and fabricated from the same sheeting stock. NO variations in sheeting color will be accepted. For example, two yellow warning signs on the same assembly must have the same color yellow sheeting, NOT two different shades of yellow because each sign was fabricated from a different sheeting stock.

Per KYTC Policy, all signs shall be fabricated using Type XI Sheeting.

All Regulatory, Warning, and Guide Signs shall be paid by the total square footage of all signs unless a specific sign has a pay item. Each sign’s square footage shall be calculated using the given dimensions in the 2023 MUTCD and paid to the second decimal point. The required sheeting colors shall be incidental to the unit cost.

The following sign’s square footage shall be calculated as listed below:

Yield (R1-2): 36x36x36 = 3.9 SQFT.

48x48x48 = 7.48 SQFT.

60x60x60 = 10.83 SQFT.

No Passing Zone (W14-3): 48x48x36 = 5.56 SQFT.

64x64x48 = 9.88 SQFT.

Circular Railroad (W10-1): 36” Diameter = 7.07 SQFT.

48” Diameter = 12.57 SQFT.

All CUSTOM Regulatory, Warning, and Guide Signs shall be paid by the total square footage of all signs. Each custom sign’s square footage shall be calculated using the specified dimensions in the Department’s Work Order and paid to the second decimal point. The required sheeting colors shall be incidental to the unit cost.

Signs and plaques shall be considered CUSTOM when they do NOT have a Standard MUTCD Sign Designation Code or when a Standard MUTCD sign needs detailed drawings to calculate the overall dimensions of the sign.

Standard MUTCD Signs with minor message variations shall NOT be considered custom; examples include Prohibited, Trucks Use Right 2 Lanes, Buckle Up – State Law, $500 Fine for Littering, etc.

The vendor shall submit detailed sign drawings for all CUSTOM signs. Detailed sign drawings shall include a computer generated colored sign sketch/layout with all sign and border dimensions, line and message spacing, lettering font type and size, etc. Sign drawings shall be approved by KYTC before manufactured and installed.

All concrete applications shall use Class “A” Concrete. Bagged Concrete applications shall use a minimum 3500 psi blend. All concrete shall be incidental to the unit cost. A Concrete Materials Certification Certificate shall be furnished by the supplier.

All materials shall be sampled and tested in accordance with the Department’s Sampling Manual. The materials shall be available for testing at a sufficient time in advance of the use of the materials to allow for the necessary time for testing. Materials shall be randomly tested during the contract. Materials that fail testing shall be replaced at no additional cost to the Department.

No storage of materials and/or equipment will be allowed at KYTC facilities. The District will not pay for stockpiled signs.

Price changes will be allowed on a 3 month basis for lines 8-47, due to the volatile market for steel and aluminum.

Requested price increases must be based on industry wide price changes and must be equal to the increase from suppliers with firm documentation. The contract holder is required to furnish KYTC Division of Purchases with notice of any price decreases as soon as such decreases are available. Section 2.07 will apply to all other line items.

Document Phase Document Description Page 22

2700000231 Final Furnishing and Installing Roadway Sheeting Signs - D7

Total Pages: 50

1.02- Installation All sign assembly installations shall conform to the Manual on Uniform Traffic Control Devices (MUTCD, 2023 Edition) and the Kentucky Department of Highways Standard Drawings (current) unless otherwise specified herein.

The MUTCD can be found at: MUTCD 11th Edition with Revision 1 Incorporated - Hotlinks Version

The current KYTC Standard Drawings are attached to this document or can be found at: http://transportation.ky.gov/ Traffic-Operations/Pages/Design-Services-Branch-Standards-and-Tools.aspx

Traffic control shall be the responsibility of the contractor, shall conform to the MUTCD (2023 Edition) and the Kentucky Department of Highways Standard Drawings (current). All traffic control shall be included in the unit cost.

The vendor shall be responsible for locating all underground and aboveground utilities within the project limits including the districts lighting and signal lines. The District’s Traffic Technicians shall be contacted to locate lighting and signal lines. The vendor shall be responsible for any damage to utilities resulting from driving anchors or any other sign or post construction activity.

New concrete bases, support posts, anchors, etc. shall be installed prior to dismantling any existing sign assembly.

The removal of existing signs and supports shall be done concurrently with the installation of new signs and supports under the same traffic control and during the same work shift. Any necessary removal of existing anchors, posts, signs, and hardware shall be the responsibility of the vendor. Existing sign posts and anchors shall be removed completely or to a depth of 6” below ground level. All existing and/or damaged anchors, posts, signs, and hardware shall be disposed of and become the property of the vendor. Existing signs, posts, and anchors shall only be reused/reinstalled if specified in the District’s Work Oder.

The Type I Post (2”x 2”) shall be attached to the Type I Anchor (2.25” x 2.25”) using a 5/16” Medium (2.5”) Corner Bolt and a 5/16” Flange Nut. The Corner Bolt shall be installed in the anchor so the bolt head is facing away from oncoming traffic. Both shall have a rust resistant finish.

Contrary to the KY DOH Standard Drawings (T010), Type I Post shall NOT be spliced.

ESTIMATED post lengths will be provided in the Department’s Work Order. All Type I Posts shall be cut to the correct length in order to install the assembly to the specified height. Post cuts shall be treated with a Cold Galvanizing Compound Spray. The Vendor shall be paid based on the final length of post used.

Sign posts shall be erected vertically plumb and checked by a level bubble with no deviation. All signs shall be installed horizontally and vertically level on the posts with no deviation. All signs and posts will be inspected for level and plumb.

The Aluminum Sheeting Signs shall be attached to the Type I Square Post or Aluminum Sign Bracing using an Aluminum Shell, Steel Pin, 3/8” Drive Rivet with a 3/8” BLACK Nylon Washer to protect the sheeting.

Conventional size sign cluster assemblies with two square posts (2”) shall require additional post bracing when requested. The bracing shall be made from 12 Gage Type I Posts (2” x 2”) cut to length and treated with a Cold Galvanizing Compound spray. The horizontal square post bracing shall be attached to the vertical posts using Type “T” or “L” fitting connector brackets and 3/8” Drive Rivets. In addition to standard sign installation to the post, the inside edge of the sign shall be drilled and attached to the post bracing using a 3/8” drive rivet and a 3/8” black nylon washer. All square post bracing, connector brackets, and hardware shall be incidental to the unit cost.

A date sticker shall be placed on all signs. The month and year shall be punched on the sticker based on the sign’s installation date. The date sticker shall be applied to the back of the sign on the right –hand edge and should NOT be obstructed by the post or bracing.

For the pay item Reinstall Existing Sign:

This item shall be for the installation of an existing sign and/or a KYTC provided sign.

In addition, this pay item shall be used to reinstall existing city street name signs on top of assemblies (stop signs, etc.). This pay item shall include up to two street name signs. An existing sign shall be removed from the old assembly, reinstalled on the new assembly, and the old assembly completely removed if needed.

Document Phase Document Description Page 23

D7 https://mutcd.fhwa.dot.gov/pdfs/11th_Editionr1/mutcd11theditionr1hl.pdf

Two or more signs joined together with bracing shall be considered one sign and paid as a single reinstall.

The replacement of damaged posts and anchors shall be paid with their own respective pay items.

Existing sign holes not used when reinstalling the sign shall be covered with a square inch piece of sheeting the same color and sheeting type as the sign.

New sign holes shall be drilled if required for reinstallation.

If needed, sign bracing shall be paid by using pay item #24.

All caps, crosses, and hardware shall be incidental to the unit cost.

For the pay item Reinstall Existing Post:

This item shall be used to reinstall an existing Type I Post. 2.5” post with a 2.25” insert shall be considered one post and paid as a single post reinstall. The removal and replacement of all hardware shall be incidental to the unit cost.

For the pay item Remove Existing Signs and Assembly:

This item shall NOT be paid when a sign assembly is being replaced, relocated, or reinstalled (per the terms of the contract). This contract item shall be paid only for removing a sign assembly within the project limits when an assembly is deemed that it is no longer needed.

For the pay item Repair Type “D” Omni-Directional Breakaway Slip Base:

This item shall be for the furnishing and installing of all the necessary components and hardware needed to repair a Type “D” Slip Base System. Includes the replacing of the 8” triangular slip base top half if needed. Damaged anchors and concrete footings shall require a new installation (pay item #12). The replacement of damaged posts and signs shall be paid with their own respective pay items.

For the pay item Repair Concrete Surface Mount System:

This item shall be for the furnishing and installing of all the necessary components and hardware needed to repair a Kleen Break Model 425 Sign Post Coupler (or equivalent model). Includes the replacing of the square post receiver and locking wedge if needed. Damaged surface mount bases shall require a new installation (pay item #8). The replacement of damaged posts and signs shall be paid with their own respective pay items.

For the pay item Concrete Surface Mount System:

This item shall be for the furnishing and installing of a Kleen Break Model 425 Sign Post Coupler System (or equivalent model) on a concrete surface. The Type I Post (2”) and Sheeting Signs shall NOT be included in this pay item.

For the pay item Anchor Sign Post to Barrier Wall:

This item shall be for the furnishing and installing of a Concrete Barrier Mount Bracket to a barrier, bridge, or culvert wall. The Concrete Barrier Mount Bracket shall be installed according to the KY DOH Standard Drawings (T013). The Type I Post shall be attached to the bracket using two 5/16” Large (3”) Corner Bolts, Two 5/16” Flange Nuts, and four 5/16” Armor Coated Flat Washers (inside dia. 3/8” & outside dia. 7/8”). Once assembled the bolts, washers, and nuts shall be treated with a Galvanizing spray. All the components and hardware to install the Concrete Barrier Mount Bracket shall be incidental to the unit price.

For the pay item Luminary, Utility, or Signal Pole Installation of a Sign:

This item shall be for the vertical installation of a sign on a single pole. All signs shall be installed with ¾” x .030 stainless steel banding, flared or straight leg brackets with a single bolt and washer, and ¾” banding buckles. Flared Leg Brackets shall be used on round poles greater than 3” in diameter. Straight Leg Brackets shall be used on poles greater than 14” in diameter. Square and wooden poles larger than 8” in diameter. When banding is not applicable signs shall be attached with 2” wood or self-tapping screws, washers, and Teflon washers. Signs greater than or equal to 36” in width shall require sign bracing (pay item #24) and the hardware designed for the bracing and banding system. All banding, brackets, buckles, and hardware shall be incidental to the unit cost.

For the pay item 12 Gage Anchor (3’ x 2.25”) for Type I Post with 10 Gage Soil Stabilizer:

This item shall be for the furnishing and installing of a 12 Gage Anchor for a Type I post with a 10 Gage Soil Stabilizer. Contrary to the KY DOH Standard Drawings (T009), the bolt on Soil Stabilizer shall be designed and attached to the Anchor by using the following supplemental specifications:

Document Phase Document Description Page 24

2700000231 Final Furnishing and Installing Roadway Sheeting Signs -

The Soil Stabilizer shall be a minimum 13” in height x 9” in width with two wings/fins bent at 90 degrees and 45 degree flares extending from the top towards the bottom. This design provides maximum wind load resistance by keeping the wings/fins aligned parallel to the sign face.

The Soil Stabilizer shall be designed with three sets of holes that match up with the 1st, 9th, and 13th hole on the 3’ Anchor.

The top of the Soil Stabilizer (45 degree flared end) shall be installed flush with the top of the anchor.

The 1st (top) holes on the Soil Stabilizer shall be used to attach the square post to the anchor using a medium 2.5” corner bolt.

If not provided by the manufacturer, a 3/8” hole shall be drilled in the Soil Stabilizer at the 9th hole in the anchor.

Two 3/8” – 16x3 NC, Hex Cap Screws, G5, H.T. Zinc & Clear, CR+3 and Two 3/8” – 16 Hex Nuts, G5, Zinc, CR+3 shall be used to attach the Soil Stabilizer to the 9th and 13th holes of the 3’ Anchor. The Hex Cap Screws shall be inserted thru the Soil Stabilizer first so that the head of the screw lays flush against the Soil Stabilizer.

If needed, KYTC District 7 has a model of the anchor and soil stabilizer assembly for a visual reference.

KYTC District 7 anchor designs are subject to modifications as determined by the District.

All Anchors shall be manufactured in 3’ lengths. 3’ cuts made from a 2.25” square post will not be accepted.

Contrary to Standard Drawing (T009), all anchors shall be driven to a depth of 34” below ground elevation leaving a stub height of 2”. If rock and/or utilities are encountered then the anchor must be drilled and/or hand dug to the correct depth. Bagged concrete (min. 3500psi) shall then been backfilled around the anchor. Concrete shall be poured to ground level and the top eight anchors holes covered to prevent concrete from entering the anchor where the post will be inserted. Concrete shall set up for a minimum 24 hours before the post and sign can be installed.

The Soil Stabilizer may be removed if necessary for the drilled/hand dug anchor. Once installed and prior to post installation, the top of the anchor and soil stabilizer (inside and out) shall be treated with a Cold Galvanizing Compound spray. All concrete, components, and hardware shall be incidental to the unit cost.

For the pay item Type “D” Omni-Directional Breakaway Slip Base and Anchor:

This item shall be for the furnishing and installing of a complete Type “D” Omni-Directional Breakaway Slip Base and Anchor System. The Type “D” Slip Base System shall be installed according to the KY DOH Standard Drawings for a Type D Breakaway Sign Support (T008).

This item shall be paid as a single anchor Type “D” system. Double and triple anchor systems shall be paid with additional pay item quantities.

The Anchor shall be a 7 gage, 3” x 48” with an 8” triangular slip base bottom. The tubular post receiver shall be an 8” triangular slip base top half for a 2.5” Type I Post. All the components and hardware shall be incidental to the unit cost. The concrete footing shall be a min. Class “A” concrete and be incidental to the unit cost. The necessary excavation, backfilling, site grading to the existing slopes, and seed and protect as per section 212.03.03 of the KY Standard Specifications shall be incidental to the unit cost.

All drilled rock shall be removed from the project site and disposed of by the vendor in order to prevent damage to state/contract mowing equipment. The Type I Post (2.50”) and Sheeting Signs shall NOT be included in this pay item.

For the pay item 7 Gage Heavy Duty Anchor (3” x 3” x 48”) for Type I Post (2.5” x 2.5”):

This item shall be for furnishing and installing of a 7 Gage HD Anchor for a Type I Post (2.5”).

Anchors shall be installed in a concrete footing using the same installation notes as the Type “D” Breakaway Sign Support (T008). The concrete footing shall be a min. Class “A” concrete and be incidental to the unit cost. The Type I Post shall be attached to the Anchor using two 3/8” x 3½” Grade 8 Flanged Shoulder Bolts. One bolt installed back to front and the second installed side to side. The necessary excavation, backfilling, site grading to the existing

Document Phase Document Description Page 25

2700000231 Final Furnishing and Installing Roadway Sheeting Signs -slopes, and seed and protect as per section 212.03.03 of the KY Standard Specifications shall be incidental to the unit cost. All drilled rock shall be removed from the project site and disposed of by the vendor in order to prevent damage to state/contract mowing equipment. The Type I Post (2.50”) and Sheeting Sign or Signs shall NOT be included in this pay item.

For the pay item 7 Gage Heavy Duty Winged Anchor (3” x 3” x 36”) for Type I Post (2.5” x 2.5”):

This item shall be for the furnishing and installing of a 7 Gage HD Winged (soil stabilizer) Anchor for a Type I Post (2.5”). The Winged (Soil Stabilizer) Anchor shall be manufactured as one unit. The Type I Post shall be attached to the Anchor using two 3/8” x 3½” Grade 8 Flanged Shoulder Bolts. One bolt installed back to front/front to back and the second installed side to side.

For the pay item 7 Gage Quick Drive Anchor (3” x 3” x 36”) for Type I Post (2.5” x 2.5”): This item shall be for the furnishing and installing of a 7 Gage Quick Drive Anchor for a Type I Post (2.5”).

The Type I Post shall be attached to the Anchor using two 3/8” x 3½” Grade 8 Flanged Shoulder Bolts. One bolt installed back to front/front to back and the second installed side to side. This Anchor shall only be used upon the request of the District when the ground is too hard or rocky to drive pay item #14.

For the pay item 8” Triangular Slip Base Bottom Half Insert & Top Half Post Receiver:

This item shall be for the furnishing and installing of an 8” Triangular Slip Base Bottom Half insert for Heavy Duty Anchors and the 8” Top Half Post Receiver for Type I Post (2.5”). These items shall only be used to convert existing Heavy Duty Anchors (pay item #13 & #14) into Slip Base Anchors (NOT as a substitute for pay item #12). These items may be used with NEW installations of the Heavy Duty Winged Anchor (pay item #14). All the components and hardware shall be incidental to the unit cost.

For the pay item 12 Gage Square Post (Type I) Varies x 2.25” x 2.25”:

This item shall be inserted up inside the Type I Post (2.50”) for additional wind load support. Signs less than 36” in width shall be attached to the double wall posts using 5/16” x 3” stainless steel, all thread, bolts, stainless steel lock washers and nuts, and Teflon washers. All hardware shall be incidental to the unit cost.

For the pay item Aluminum Sign Bracing:

This item shall be for the furnishing and installing of Aluminum Sign Bracing for the attachment of Aluminum Sheet Signs to Type I Square Post. Contrary to the KY DOH Standard Drawings (T010), the Aluminum Sign Bracing shall have a 2.0” mounting surface x 7/8” depth with 3/8” diameter perforated holes on 1” centers. Sign bracing shall run from edge to edge of the sign and/or sign cluster. Signs shall be attached to the bracing using 3/8” Drive Rivets and 3/8” BLACK Nylon Washers. Sign bracing shall not be spliced within 6” of a brace to post junction. Sign bracing may be spliced once per run (>60”) using a 6” aluminum sign brace splice. Sign bracing shall be attached to the Type I Square Post using 2” or 2.5” post clamps designed for use with the sign bracing. The post clamps shall be fastened flush against the square post walls.

The following assembly options require, but are not limited to, the use of sign bracing:

All sign widths 66” or greater shall require sign bracing and post clamps.

All signs greater than or equal to 36” in width installed on a single or multi 2.5” post assembly shall require sign bracing and post clamps.

All signs, conventional or expressway size, installed on a single or multi 2.5” post CLUSTER assembly shall require sign bracing and post clamps.

Post clamps, rivets, washers, etc. shall be incidental to the unit cost.

For the pay item Reflective Sign Post Panel (#25 & #26):

This item shall be for the furnishing and installing of a Reflective Sign Post Panel on a Type I (2” or 2.5”) post. The post panel shall be 3” wide x 60” or 72” tall, with a thickness of 125 mils inch. The panel shall have three 3/8” holes (top 3”, center, and bottom 3”) which match up with the holes on the Type I square post. The panel shall be attached flush against the square post using 3/8” Jumbo Head Drive Rivets and 3/8” BLACK Nylon Washers. The sheeting shall be the same Sheeting Type and color as the sign installed on the post. Examples Include: Red, fluorescent yellow, fluorescent yellow-green, white, and yellow (Type XI Sheeting). All panel colors will be provided in the Department’s Work Order. All hardware shall be incidental to the unit cost.

For the pay item Adjustable Chevron Bracket:

This item shall be for furnishing and installing an adjustable chevron bracket on a Type I (2”) post and installing two 18”x24” chevrons on the adjustable brackets. The adjustable chevron bracket shall be a TAPCO Model CAB-2 (or

Document Phase Document Description Page 26

2700000231 Final Furnishing and Installing Roadway Sheeting Signs -equivalent model). The 18”x24” chevrons shall NOT be included in this pay item.

1.03– Work Orders District personnel will issue written Delivery Orders to the Vendor indicating the location, sign shape, and sheeting type.

Initial work order will be treated as a trial; the work order must be fully complete in accordance with contract terms before any additional work orders will be issued.

The vendor shall notify (email preferably) Natalia McMillan, a minimum of 48 hours prior to beginning work and obtain approval or proposed work schedule.

Work may be required during night, weekend, and other off peak hours. Work shifts may be less than 8 hours.

1.04-Bar Codes and Data File The back of each sign shall be permanently marked with a bar code. Apply a 2 inch x 1 inch foil barcode label provided by KYTC in the lower right quadrant of the sign back. For signs where the bottom edge of the sign is not parallel to the ground, the lowest corner of the sign shall be used. The barcode shall be placed no less than one inch and not more than three inches from the sign edges. The barcode shall be placed so that a sign post will not cover the label. (See Attached Sign Post Drawings-Appendix A) Barcodes shall be applied to signs indoors at a temperature of 50 degrees Fahrenheit or higher. The application location shall be clean (free of oils, dust, etc.). If not clean, an alcohol swab shall be used to clean the area then let dry before application. It may be best practice to clean several signs at a time so some dry while others are cleaned. Keep barcodes in order especially within a particular type of sign if possible. Data for each sign shall include the barcode number, MUTCD reference number, sheeting manufacturer, sheeting type, manufacture date, color of primary reflective surface, installation date, latitude and longitude using the North American Datum of 1983 (NAD83) or the State Plan Coordinates using an x and y ordinate of the installed location. Additional information may be requested by KYTC as needed.

Data shall be provided electronically on form TC 71-229 Sign Details Information and TC 71-230 Sign Assembly Information forms. The contractor may choose to present data in a different format, provided the information submitted to the Department is equivalent to the information required on the Department TC forms. The forms must be submitted in electronic format regardless of which type of form is used. The Department will not accept handwritten or PDF forms. These forms should be submitted prior to final inspection of the signs. The Department will not make payment until the barcode information for all signs on the delivery order invoice has been submitted.

For bar codes, please contact the KYTC Operations and Pavement Management Branch at (502) 564-4556.

1.05– Insurance Requirements

A. Required Coverage The awarded vendor(s) shall be responsible for maintaining, and not reducing, the following insurance coverages, types, and limits of liability. Further awarded vendor shall be able to produce evidence of insurance in compliance with (C) through the entire contract:

Commercial General Liability Insurance in accordance with minimum limits of liability of $1,000,000.00 per occurrence, $2,000,000.00 aggregate. The Commonwealth, in the Request for Solicitation, may require higher limits depending on the type of solicitation.

B. Additional Types of Insurance

1. Automobile Liability Insurance (If Applicable) Automobile Liability Insurance is required for delivery, onsite training, services or events in all situations where the Contractor must drive to any property where Commonwealth operations occur. With regard to delivery, if the items requested in this solicitation will be delivered by the awarded Contractor or Subcontractor, proof of Automobile Liability Insurance must be provided prior to award. If items will be delivered by common courier (USPS, FedEx, UPS, Old Dominion Freight Line, etc.), this requirement does not apply.

The Contractor or Subcontractor must provide a certificate of insurance coverage for any vehicle used in performance of this contract, whether owned, non-owned, or hired, or other vehicles utilized by the Contractor or Subcontractor.

Said policy of insurance to have a minimum coverage limit of $1,000,000.00 per occurrence combined single limit for bodily injury, including death, and property damage.

Document Phase Document Description Page 27

This requirement does not apply if the Contractor does not own, lease, or hire any automobiles to be used in connection with performance under any Contract resulting from this Solicitation.

2. Kentucky Workers Compensation Insurance (if applicable)

The coverage must comply with KRS 45A.480 and KRS Chapter 342.

C. Evidence of Insurance Coverage

The successful bidder shall provide evidence of insurance coverage as required. Failure to do so shall constitute a material breach of this Contract and may result in immediate cancellation of the Contract.

For all required insurance coverages, during the course of the Contract, the awarded vendor shall not be self-insured or utilize a Captive Insurer or a fronting policy that shifts risk back to the awarded vendor without prior written approval by the Office of the Controller of the Commonwealth.

Further, the awarded vendor shall not utilize an insurer or similar entity not in good standing with the Insurance Commissioner to fulfill the insurance requirements of the contract without prior written approval by the Office of the Controller of the Commonwealth.

Such approvals may require additional financial review, proof of funds, or bonding requirements sufficient for the risk associated with the services covered by the Contract, and approval or rejection is within the sole discretion of the Commonwealth’s Office of the Controller.

Contractor shall furnish the Certificate of Insurance prior to award and shall, upon request of the Commonwealth at any time during the contract term, provide a current, valid Certificate of Insurance.

Contractor and/or its insurer shall provide immediate notice of nonrenewal or cancellation of coverage during the course of the Contract.

All Certificates of Insurance must be signed by an authorized representative of the insurance agency, shall be in compliance with the laws of the Commonwealth of Kentucky, and shall be placed with a licensed resident or non-resident agent who represents insurance companies authorized to do business in Kentucky. The insurer shall have an AM Best rating of B+ or higher. Visit www.ambest.com for verification. Failure to meet this requirement may result in the bid being deemed non-responsive. A list of authorized companies can be found at https://insurance.ky.gov/ppc/ Company/Default.aspx.

A Certificate of Insurance (COI) on an ACORD form shall include the following:

# The certificate holder shall be listed as:

Kentucky Transportation Cabinet Division of Purchases

200 Mero Street, 4th Floor Frankfort, Kentucky 40622

# Certificate of Insurance must contain the following language in the Description of Operations box:

“The Commonwealth and its agents are Additional Insureds for the contract resulting from the solicitation. Additional insured protection afforded is on a primary and non-contributory basis.”

# The contract number in the Description of Operations box.

D. Subcontractors

If the contract allows for Subcontractors and utilizes Subcontractors, prior to the commencement of any work by a Subcontractor.

# The primary Contractor’s Certificate of Insurance must identify coverage that meets or exceeds the insurance requirements defined in this contract and that covers Subcontractor and its work in support of the Contract or the Subcontractor must submit and maintain a Certificate of Insurance that also

Document Phase Document Description Page 28

2700000231 Final Furnishing and Installing Roadway Sheeting Signs - D7

Total Pages: 50 http://www.ambest.com https://insurance.ky.gov/ppc/Company/Default.aspx https://insurance.ky.gov/ppc/Company/Default.aspx meets or exceeds the insurance requirements of the Primary Contractor defined in this contract, with an Additional Insured Endorsement.

# KYTC reserves the right to request copies of all Subcontractor’s Certificate(s) of Insurance at any time.

Section 2 - Terms and Conditions of the Contract

2.00 – Scope of the Contract

The Kentucky Transportation Cabinet Division of Purchases issues this solicitation on behalf of the Division of Highways to award a master agreement contract for: Furnishing & Installing Roadway Sheeting Signs D7

2.01 - Contract Components and Order of Precedence

The Commonwealth’s acceptance of the offer indicated by the issuance of an Award by the KYTC Division of Purchases shall create a valid Master Agreement consisting of the following:

1. The written Master Agreement between the Parties;

2. Any Addenda to the Solicitation;

3. Any provisions of the Solicitation and all attachments thereto;

4. The Bidder’s response to the Solicitation, and

5. The Kentucky Revised Statutes KRS 45A.

In the event of an inconsistency between provisions of the solicitation, the inconsistency shall be resolved by giving precedence in the following order: (a) the Specifications; (b) other provisions of the Solicitation, whether incorporated by reference or otherwise; (c) Contract or Master Agreement Terms and Conditions; (d) FAP 110-10-00 – General Conditions and Instructions for Solicitations and Contracts.

2.02 - Initial Contract Period

The Master Agreement will be for the initial period beginning upon award and expiring 10/31/27.

2.03 - Optional Renewal Period

This Master Agreement may be extended at the completion of the initial contract period for four (4) additional one-year periods. This extension must have the written approval of the vendor and the KYTC Division of Purchases.

The Commonwealth of Kentucky reserves the right to renegotiate any terms and/or conditions as may be necessary to meet requirements for the extended period. The vendor will be advised of any proposed revisions prior to the renewal periods. In the event proposed revisions cannot be agreed upon, either party shall have the right to withdraw without prejudice from either exercising the option or continuing the contract in an extended period.

2.04 - Divisions/Agencies to Be Served

This contract shall be for use by the following Divisions/Agencies of the Kentucky Transportation Cabinet:

Division of Highways D7& D8

No shipments or services are authorized until an official Delivery Order has been fully processed by an authorized agency.

2.05 - Quantity Basis of Contract

Any and all quantities mentioned in this solicitation are purely estimates and are not to be implied nor inferred as being guarantees. The State is obligated to buy only that quantity needed by its agencies during the term of the contract. Requirements may exceed the quantities shown and the contractor will be required to furnish all requirements shown on Delivery Orders dated during the life of the contract.

2.06 - Exception to Required Use of Contract

The establishment of this Master Agreement is not intended to preclude the use of similar products when requested by the agency. The Commonwealth of Kentucky reserves the right to acquire large requirements through other competitive processes.

Document Phase Document Description Page 29

2700000231 Final Furnishing and Installing Roadway…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .