Final_RFB_605_2300000383_1_SO_FORM.PDF

Document ID: RFB 605 2300000383 Page: 1

Commonwealth of Kentucky

SOLICITATION

Modification: No Version #:

TITLE: Freeze-Thaw Machine

Date Issued:

01/06/2023 Record Date:

01/06/2023

Solicitation Closes Date:

01/20/2023 Time:

13:30

Solicitation No:

RFB 605 2300000383

Online Bidding Prohibited: No For Information Call:

LANESSIA MCCOURT

502-782-3979

Bid Receiving Location:

Bid Receiving

See Terms & Conditions for Bid Submission Instructions

Other KY

Vendor Customer Number:

Vendor Name:

Phone Number:

Fax Number:

Email Address:

Ordering

Address:

City, State, Zip:

Contact Name:

Contact Email:

Contact Phone Number:

Payment

Address:

City, State, Zip:

Contact Name:

Contact Email:

Contact Phone Number:

Ownership Type

__ Sole Proprietorship __ Partnership __ Corporation __ Other_________________________

SIGNATURE OF AUTHORIZED AGENT IS REQUIRED UNLESS RESPONSE

IS SUBMITTED ELECTRONICALLY. FAILURE TO SIGN SHALL RENDER

THE BID INVALID.

Signature X_________________________________________ FEIN#____________________ Date____________

All offers subject to all terms and conditions contained in this solicitation.

Document ID: RFB 605 2300000383 Page: 2

Line Items

Commodity Group: Default Commodity Group

Line CL Description Quantity UOM Unit Cost Line Total or Contract Amnt

1 Freeze-thaw machine 2.00000 EA

Comm Code Comm Description Manufacturer Model # Manuf Part #

92520 Cold Storage; Refrigeration; Fast Freeze/ Engineering

Extended Description

***ONLY ONLINE BIDS WILL BE ACCEPTED FOR THIS RFB.***

Emailed and hard copies delivered by any method WILL NOT BE ACCEPTED.

See attached document "How to Respond to an Online Bid through the Kentucky Vendor Self Service site (updated).pdf".

Please enter contact person, phone number and email in the Comments Section.

Division of Equipment is requesting a solicitation to be issued to award a Master Agreement to purchase custom built 60 beam freeze-thaw machine with touch screen control, data logger, self-contained water tank and integrated compressor within the unit. Additional specifications are attached to the header

Line CL Description Quantity UOM Unit Cost Line Total or Contract Amnt

2 Labor 1.00000 HOUR

Comm Code Comm Description Manufacturer Model # Manuf Part #

92520 Cold Storage; Refrigeration; Fast Freeze/ Engineering

Extended Description Labor- Hourly rate for onsite service/support.

Shipping Information KYTC Division of Equipment - Receiving Shop

1239 Wilkinson Blvd

Frankfort KY 40601

Billing Information KYTC Division of Equipment

1234 Wilkinson Blvd

Frankfort KY 40601

Document ID: RFB 605 2300000383 Page: 3

Submission Checklist

The following items will be required to be submitted with bid:

Item Price Delivery

ELECTRONIC BID SUBMISSION

Bid responses shall be received by electronic submission in the eProcurement system.

Link: https://emars311.ky.gov/webapp/vssprdonline3111d/AltSelfService

***See attached document “How to Respond to an Online Bid through the Kentucky Vendor Self Service site (updated).pdf”***

An electronic bid shall be authorized by the proper agent of the firm by the act of submitting it electronically through the eProcurement system.

Bid information MUST be completed online. Response must contain all required information for the Solicitation. All bidders MUST be registered in the Commonwealth eProcurement System via the Vendor Self Service System at https://emars311.ky.gov/webapp/vssprdonline3111d/AltSelfService

Allow 24 – 48 hours to complete Vendor Registration. Vendors must be logged in to their Vendor Self Service (VSS) account in order to submit a response. Registrations completed the day of bid closing must be completed by the Vendor in the VSS portal. The Customer Resource Center is not able to complete registrations and activate accounts on the same day. Closing dates will not be extended for Vendors not registered by the date/time of the bid closing. Vendor Self Registration Guides are provided at https:// finance.ky.gov/eProcurement/Pages/doing-business-with-the-commonwealth.aspx

All bidders are cautioned to begin their electronic submission in sufficient time to complete before the closing date and time. Delays due to technical difficulties or document upload impediments shall not be justification for acceptance of a late bid or proposal. Vendor attention to this advisory is encouraged. If you need assistance, please contact the Customer Resource Center (CRC) by email at Finance.CRCGroup@ky.gov or phone 502-564-9641 or toll-free 877-973-

HELP (4357).

BID PRICES SUBMITTED ON COMPANY QUOTE FORMS ARE DISCOURAGED. COMPANY TERMS

AND CONDITIONS AND/OR SALES AND USE AGREEMENTS OFTEN CONFLICT WITH STANDARD

SOLICITATION REQUIREMENTS AND MAY RESULT IN REJECTION OF BID OFFER.

Online bid responses must be in an “Accepted” status and shall be assigned a date and time stamp from the eProcurement system at the time of final acceptance and formal submission by the vendor. The system will not allow submission of an online response after the published date and time for closing.

An offer may be modified or withdrawn by electronic or written notice ONLY if received prior to the bid closing date and time. An electronic offer may be modified by applying the appropriate electronic signature and following the procedure in the state’s eProcurement signature.

PUBLIC BID READINGS

In-person public bid readings have been discontinued by the KYTC Division of Purchases. We will now be offering public bid readings via telephone.

Any person wishing to hear a bid reading may call our conference line at 866-830-9434, Participant Code 21327950, at 3:00 pm, Eastern Time on the bid closing date.

BID SUBMISSION CHECKLIST

The vendor MUST include the following with the bid submission. If the items below are not submitted with the bid, the Commonwealth MUST deem the bid non-responsive and SHALL NOT be considered for award.

_____ BID INFORMATION – COMPLETED (See Section 5.00)

Document Description Page 4

2300000383 Freeze-Thaw Machine https://emars311.ky.gov/webapp/vssprdonline3111d/AltSelfService https://emars311.ky.gov/webapp/vssprdonline3111d/AltSelfService https://finance.ky.gov/eProcurement/Pages/doing-business-with-the-commonwealth.aspx https://finance.ky.gov/eProcurement/Pages/doing-business-with-the-commonwealth.aspx mailto:Finance.CRCGroup@ky.gov

All other items MUST be submitted prior to award however, vendors are strongly encouraged to include with bid submission.

_____ CERTIFICATE OF AUTHORITY – REGISTRATION WITH SECRETARY OF STATE BY FOREIGN

ENTITY (See Section 2.12)

_____ REQUIRED AFFIDAVIT(S) (See Attachments A, B, C, etc. as applicable)

_____ TWO COPIES OF THE MANUFACTURER’S PUBLISHED SPECIFICATIONS

PLEASE READ THIS SOLICITATION AND ITS INSTRUCTIONS IN ITS ENTIRETY.

This is a Request for Bid (RFB).

Vendors shall comply with the terms and conditions stated in the solicitation.

Any efforts to negotiate these terms and conditions SHALL NOT be accepted and SHALL cause the bid to be deemed non-responsive.

The General Conditions and Instructions for Solicitations and Contracts shall be incorporated by reference in each solicitation and resulting contract. Therefore, it is the bidder's responsibility to access and read these General Conditions at: https://finance.ky.gov/office-of-the-secretary/office-of-policy-and-audit/Pages/Finance-Policies.aspx click on the file named FAP 110-10-00 General Conditions and Instructions for Solicitations and Contracts or request a copy by contacting the KYTC Division of Purchases buyer named in Section 3.01. Every person submitting a bid to the Commonwealth shall be deemed to have assented to these conditions by the act of bidding.

Section 1 - Specifications – Commodity

1.00 - Specifications of Commodity

ITEM 1 – FREEZE-THAW MACHINE

GENERAL: It is the intent and purpose of this specification to describe the minimum requirements for a 60 beam free-thaw machine. The machine furnished shall be new and manufacturer’s latest standard production model. Must be complete with ALL standard equipment as listed as such in the manufacturer’s latest literature. Two (2) copies of the manufacturer’s published specifications may be submitted with bid. Units shall meet the following specifications:

Scope of Contract-Section 1

This solicitation has been issued on behalf of the Kentucky Department of Transportation for two (1) custom built 60 beam freeze-thaw machine with touch screen control, data logger, self contained water tank and integrated compressor within the unit. One single Master Agreement contract will be awarded. This solicitation includes purchase of the machines, extended warranty and service maintenance agreement. The machine is utilized for the evaluation of resistance of concrete to rapid freezing and thawing. They shall meet or exceed the current test method standards set by American Society for Testing and Materials (ASTM) C666 Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing and Kentucky Method 64-626. The successful bidder will supply: one (1) freeze-thaw machine; delivery; installation and any tools, equipment or parts (i.e. connectors) to complete installation; care manuals; training; and a minimum one year parts and labor warranty.

Document Description Page 5

2300000383 Freeze-Thaw Machine https://finance.ky.gov/office-of-the-secretary/office-of-policy-and-audit/Pages/Finance-Policies.aspx https://finance.ky.gov/office-of-the-secretary/office-of-policy-and-audit/Pages/Finance-Policies.aspx

Site Visit

To ensure appropriate access, installation location, drains, all utilities and connections for the proposed installation a SITE VISIT IS STRONGLY RECOMMENDED BUT NOT REQUIRED. (See Installation Space Restrictions below)

The site visit will take place Thursday January 12,2023 at 10:00 A.M. (EST) at 1239 Wilkinson BLVD. Frankfort, KY 40601.

Installation Space Restrictions

The vendor will offload each machine from the truck to the loading dock. The loading dock door is 84 inches wide by 88 inches high. The machines will then be moved down the hallway which is 96 inches wide. There is a counter and a water fountain that protrude into this space up to 26 inches. The entrance to the lab is the third doorway on the left. This doorway is 79 inches wide by 83 inches high. The machines must be maneuvered to make a 90 degree turn from hallway through doorway. They will then have to be able to make 2 more sharp turns in a limited space to maneuver around cabinets and counter. On the first turn there is 125 inches between the counter and the wall. On the second turn there is 119 inches between the counter and the wall. The machines will then have to be moved to the far end of the lab and vendor must squeeze between a large bending machine and an oven.

The space between the bending machine and oven at its most narrow is 58 inches. If this proves to be a problem the oven may be moved enough to allow for the machines to pass.

The machines will then have to pass through another opening into our concrete mixing and freeze-thaw testing area. This opening is 76 inches wide and is open to the ceiling. The machines will then be placed in the general freeze-thaw area, a space of approximately 135 inches by 135 inches. Exact placement will be determined by the Transportation Cabinet staff to maintain an efficient workspace.

Requirements and Capabilities

Automatic-Freeze-Thaw Cycling

The machines shall be capable of cooling concrete beams in air from 40 degrees Fahrenheit to 0 degrees Fahrenheit and raising the temperature of the beams from 0 to 40 degrees Fahrenheit in water. More specifically, the machines shall conform to all requirements of ASTM C-666, Procedure A or B, as well as Kentucky Method 64-626 especially in regard to the rates of freezing and thawing and uniformity of temperature throughout the chamber.

Capacity

The interior of each of the two freeze-thaw chambers shall accommodate 60 beams held in the provided removable stainless steel rack system where no weight shall be placed on the pins at either end of the beams while allowing air and water to move freely across the surfaces of the beams.

Each beam is 3” X 4”X16”and weighs approximately 16-17 pounds.

Construction

1. The freeze-thaw unit shall be designed as a single skid mounted unit that would entail minimum installation. The freeze-thaw water tank and refrigeration system are an integral part of the machine/skid assembly. The lid shall operate with an electric linear actuator. Circulating fans

Document Description Page 6 in the lid will provide uniform air temperature in the chamber as specified in the Test Method. A three (3) ton 7.5 horsepower Copeland condensing unit shall be housed within each machine.

2. Each freeze-thaw machine shall be a self-contained unit whereby the water tank is located beneath the freeze-thaw chamber to allow a gravity drain and the refrigeration system using an air-cooled condensing unit will also be located within the machine to prevent unit malfunctions that could be attributed to environmental extremes.

3. The overall dimensions of the machines shall not exceed 110 inches in length, 63 inches in width and 55 inches in height. This machine shall be designed to operate and function effectively within the footprint provided.

See Installation Space Restrictions

4. The capacity of the refrigeration system shall be sufficient to meet the extremes of ASTM C-666 specification as well as the Kentucky Method 64-626.

5. Easy access to the condenser for periodic cleaning is required. Safety switches, reset switches, refrigerant sight glasses and other items normally associated with condensing unit operation shall be visible to the operator.

6. At no time shall the two machines together exceed 90 decibels at the installed location in compliance with the maximum allowable noise levels described in O.S.H.A. Standards for General Industry, table for Permissible Noise Exposures.

7. The chamber shall be insulated with a minimum of 4 inches of polyurethane foam.

8. The interior of the chamber shall be watertight, 304 stainless steel, including rack system for beam support.

9. The chamber floor shall be a minimum of 12 gauge 304 stainless steel.

10. The exterior of the chamber shall be a minimum of 18 gauge galvannealed steel and powder coated.

11. The chamber drain shall incorporate a cleanable screen that will inhibit sample debris from entering the piping systems.

12. There shall be a cleanable baffling and screening tank for water to flow through between the chamber and the sump tank. This will prevent sediment from entering the sump tank.

13. The chamber bottom shall be sloped toward the drain location to ensure proper chamber drainage.

14. There shall be a stainless steel float switch in the chamber to monitor the presence of water in the chamber.

15. The water storage tank shall be made of polyethylene plastic and be insulated to prevent condensation. Methods of emptying and periodic cleaning of the tank shall also be incorporated.

16. Pumps circulating the specimen thaw water shall be stainless steel.

17. Valves shall not be vulnerable to sand/cement particles found in the thaw water. Valves shall operate electrically.

18. All system piping shall be either PVC schedule 80, copper or stainless steel.

19. All water piping shall be insulated to prevent condensation.

Document Description Page 7

20. The electrical heater used to maintain thaw water temperature shall be of a type, design and material not subject to scaling. The heater shall be located for easy access to inspect and maintain.

21. Each control system shall operate all equipment in manual or automatic mode.

22. Each control system shall be programmable to meet the needs of the various cycles and temperatures required. Each control system shall be equipped with a program to run ASTM C 666 Procedure A, and B as well as a program to run Kentucky Method 64-626.

23. Each control system shall be capable of monitoring at least five temperatures to record two control beams temperatures as well as the temperature of the thaw water, the chamber, and the laboratory air.

24. Each control system shall include a cycle counter that may be viewed, operated and reset from the touch screen.

25. All data related to the entire freeze-thaw process shall be visible on the touch screen.

26. Operational interlocks shall be included such as; no run with lid open and no refrigeration with water in the chamber.

27. All machine safety devices shall comply fully with all O.S.H.A and K.O.S.H.A. applicable standards.

28. The unit shall have an emergency Stop button.

29. Each control system shall record all temperatures that are monitored as well as date, time, cycle number, and mode of operations at least once every five minutes. Permanent data logging shall be accomplished via a memory card.

30. Each control system shall come with its own UPS, battery pack, to ensure there will be no interruption in the data logging process due to power outages.

31. Each control system shall have the capability to be remotely monitored by the manufacturer via the internet to allow for requested updates, adjustments, or repair to the computer programming quickly from their offices.

32. Provide all software and training necessary to properly operate, maintain and conduct the normal operations of the machines.

33. Service manuals, electrical schematic, parts lists, operating and maintenance instructions shall be included for the overall system and each major component.

Initial Warranty Period

A minimum one-year full warranty including all parts and labor will be included. The full warranty period will commence upon Cabinet acceptance that the machines have been installed correctly and the equipment is operating properly with no problems. The vendor shall provide the agency with written documentation confirming the starting and ending date of the initial full warranty period. The Kentucky Transportation Cabinet will have zero expense during the initial warranty period. Successful bidder shall provide on-site repairs within 72 hours of notice.

The Cabinet may observe but will not assist in repairs for the initial warranty term. The Cabinet will derive the benefit of all Original Equipment Manufacturer (OEM) warranties on components that exceed the warranty provided by the machine manufacturer.

Document Description Page 8

Extended Warranty Periods

An extended warranty shall be offered at the end of the initial warranty period. This shall include software program downloads, phone/technical support, remote system monitoring and trouble shooting. This does not include on-site support.

On-Site Maintenance Service/Support

After the initial warranty period vendor shall provide on-site hardware support/repairs. The repairs shall be based on a flat hourly rate plus billable parts. The hourly rate shall include travel. Vendor shall arrive on-site within 72 hours of notification.

Equipment Delivery/Location

Manufacturer shall deliver and install equipment at the location listed below:

Kentucky Transportation Cabinet

Department of Highways

Division of Materials

1227 Wilkinson Boulevard

Frankfort, KY 40622

Manufacturer factory personnel will verify each machine’s performance in accordance with specifications before shipment and after installation. The machine shall be delivered and installed at the same time. Delivery and installation preferred to be completed nine (9) months from the date of contract award. The warranty start date shall be date of delivery/installation.

Training

Vendor shall provide three (3) days of comprehensive on-site training. The comprehensive training shall include but not limited to operating instructions, regular maintenance and overview of trouble shooting.

Section 2 - Terms and Conditions of the Contract

2.00 – Scope of the Contract

The Kentucky Transportation Cabinet Division of Purchases issues this solicitation on behalf of the Division of Equipment to award a master agreement contract for: Freeze Thaw Machine

2.01 - Contract Components and Order of Precedence

The Commonwealth’s acceptance of the offer indicated by the issuance of an Award by the KYTC Division of Purchases shall create a valid Master Agreement consisting of the following:

1. The written Master Agreement between the Parties;

2. Any Addenda to the Solicitation;

Document Description Page 9

3. Any provisions of the Solicitation and all attachments thereto;

4. The Bidder’s response to the Solicitation, and

5. The Kentucky Revised Statutes KRS 45A.

In the event of an inconsistency between provisions of the solicitation, the inconsistency shall be resolved by giving precedence in the following order: (a) the Specifications; (b) other provisions of the Solicitation, whether incorporated by reference or otherwise; (c) Contract or Master Agreement Terms and Conditions;

(d) FAP 110-10-00 – General Conditions and Instructions for Solicitations and Contracts.

2.02 - Initial Contract Period

The Master Agreement will be for the initial period beginning upon award and expiring 1/31/2024.

2.03 - Optional Renewal Period

This Master Agreement may be extended at the completion of the initial contract period for four (4) additional one-year periods. This extension must have the written approval of the vendor and the KYTC Division of Purchases. The Commonwealth of Kentucky reserves the right to renegotiate any terms and/ or conditions as may be necessary to meet requirements for the extended period. The vendor will be advised of any proposed revisions prior to the renewal periods. In the event proposed revisions cannot be agreed upon, either party shall have the right to withdraw without prejudice from either exercising the option or continuing the contract in an extended period.

2.04 - Divisions/Agencies to Be Served

This contract shall be for use by the following Divisions/Agencies of the Kentucky Transportation Cabinet:

Division of Equipment

No shipments or services are authorized until an official Delivery Order has been fully processed by an authorized agency.

2.05 - Quantity Basis of Contract

Any and all quantities mentioned in this solicitation are purely estimates and are not to be implied nor inferred as being guarantees. The State is obligated to buy only that quantity needed by its agencies during the term of the contract. Requirements may exceed the quantities shown and the contractor will be required to furnish all requirements shown on Delivery Orders dated during the life of the contract.

2.06 - Exception to Required Use of Contract

The establishment of this Master Agreement is not intended to preclude the use of similar products when requested by the agency. The Commonwealth of Kentucky reserves the right to acquire large requirements through other competitive processes.

2.07 - Basis of Price Revisions

PRICE ADJUSTMENTS: Unless otherwise specified, the prices established by the Master Agreement shall be firm for the contract period subject to the following:

Document Description Page 10

A. Price Increases: A price increase will not be allowed during the first twelve (12) months of the contract. Only one price increase will be allowed during the contract period. The price increase must be based on industry wide price changes. The contract holder must request in writing a price increase at least thirty (30) days prior to the effective date and shall provide firm proof that the price increase(s) is justified. The KYTC Division of Purchases may request additional information or justification. If the price increase is denied, the contract holder may withdraw from the contract without prejudice upon written notice and approval by the KYTC Division of Purchases. Notice of withdrawal must be provided a minimum of forty-five (45) days prior to the effective date however the vendor must continue service at the contract prices until a new contract can be established (usually within sixty (60) days).

B. Price Decreases: The contract price shall be reduced to reflect any industry wide price decreases.

The contract holder is required to furnish the KYTC Division of Purchases with notice of any price decreases as soon as such decreases are available.

C. Extended Contract Periods: If the contract provides for an optional renewal period, a price adjustment may be granted at the time the contract is renewed, subject to price increase justification as required “A. Price Increases”. One (1) additional price increase may be granted during the extended contract period. This price increase will not be allowed during the first six (6) months of the extended contract period and will be subject to the conditions in “A” above.

2.08 - Addition or Deletion of Items or Services

The KYTC Division of Purchases reserves the right to add new and similar items, with the consent of the vendor, to the contract. If an addition is agreeable to both parties, the KYTC Division of Purchases will issue a Modification. Until such time as the vendor receives a Modification, the vendor shall not accept Delivery Orders from any agency referencing such items or services.

2.09 - Changes and Modifications to the Contract

During the period of the contract, a modification shall not be permitted in any of its conditions and specifications, unless the contractor receives electronic or written approval from the KYTC Division of Purchases. If the contractor finds at any time that existing conditions make modification in requirements necessary, the contractor shall report the matter promptly to the KYTC Division of Purchases for consideration and decision. All contract modifications shall be subject to the provisions of 200 KAR 5:311.

2.10 - Basis of Shipment

Quotations of unit prices on this solicitation shall be F.O.B. Destination Freight Prepaid and Allowed to the receiving agency. The vendor shall be fully responsible for all shipments and freight charges involved to the ordering agency. The responsibility for filing freight claims lies with the vendor.

2.11 - Notices

The Division of Purchases Buyer identified below shall be the sole point of contact throughout the procurement process. All communications, oral and written (regular, express, or electronic mail) concerning this procurement shall be submitted to:

Lanessia McCourt

Division of Purchases

Kentucky Transportation Cabinet

Document Description Page 11

Phone: 502-564-4630

E-mail: Lanessia.mccourt@ky.gov

From the issue date of this solicitation until a Contractor(s) is selected and the selection is announced, Offerors are not permitted to communicate with any Commonwealth staff concerning this solicitation

After the award of a contract, all programmatic communications are to be made to the Agency Contact Person identified in the contract document with a copy to the Division of Purchases Buyer.

After the Award of a contract, all communications of a contractual or legal nature are to be made to the KYTC Division of Purchases Buyer.

2.12 Delivery Orders for Commodities

No shipments are authorized until an official Delivery Order has been fully processed by an authorized agency or payment has been made via Pro-Card.

Penalties assessed for late deliveries will be calculated based on the date of the Delivery Order and the delivery time stated in Section 2.13.

Payment shall be made against the actual quantities received. The Delivery Order shall be modified to adjust quantities if needed.

Any and all items or portions of items not delivered on or prior to the expiration date of the contract shall be considered cancelled after that date. There will be no claim for damages allowed by reason of cancellation thereof.

2.13 - Deliveries

Delivery at the earliest possible date is desired. See attached bid sheet to indicate delivery time.

Vendor guarantees delivery of all requested items within ___________ calendar days after receipt of Delivery Order.

The Vendor agrees that when delivery is not made within the contracted due date, one percent (1%) per day shall be deducted from the Vendor’s invoice for each day the Vendor fails to meet the contracted delivery date.

The Vendor is not responsible for and shall not be penalized for delays in its delivery when caused by factors or events outside Vendor’s control, including but not limited to acts or omissions of the Commonwealth or third parties, acts of civil or military authority, civil disturbance, war, terrorism, pandemics, explosions, fire, floods, tornadoes or other natural disasters or acts of God.

2.14 - Inspection

All supplies, equipment and services shall be subject to inspection or tests by the Commonwealth prior to acceptance. In the event supplies, equipment or services are defective in material or workmanship or otherwise not in conformity with specified requirements, the Commonwealth shall have the right to reject the items or services or require acceptable correction at the vendor’s expense.

2.15 - Invoices

Document Description Page 12

Invoices, if required, shall be prepared and transmitted to the agency receiving the goods or services.

One copy shall be marked "original" unless otherwise specified. Each invoice shall contain at least the following information:

a. Contract and Delivery Order number;

b. Item numbers;

c. Description of supplies or services;

d. Sizes;

e. Quantities;

f. Service Dates;

g. Unit prices; and

h. Extended totals.

2.16 - Payments

The vendor shall be paid, upon the submission of proper invoices to the receiving agency at the prices stipulated for the supplies delivered and accepted, or services rendered. Unless otherwise specified, payment will not be made for partial deliveries accepted. Payments will be made within thirty (30) working days after receipt of goods and vendor’s invoice in accordance with KRS 45.453 and KRS 45.454. A penalty payment of one percent (1%) per month shall be added to the amount due the vendor for each full or partial month that the payment exceeds 30 working days.

2.17 - Vendor’s Report

The vendor(s) may be asked to furnish the KYTC Division of Purchases, a report showing volume which has been sold to the Commonwealth and its using agencies each six (6) months of the contract period.

The report will include political subdivisions and university purchases. This report may be the vendor’s computer printout sheet or form. This shall apply to all items, which are to become a part of this contract.

This report must reference usage by brief description, product number or other format designated by the KYTC Division of Purchases.

2.18 - Post Contract Agreements

The Master Agreement shall represent the entire agreement between the parties. Prior negotiations, representations, or agreements, either written or oral, between the parties hereto relating to the subject matter hereof shall be of no effect upon this contract. Unless, contractually provided, the Commonwealth shall not be required to enter into nor sign further agreements, leases, company orders or other documents to complete or initiate the terms of the contract. Any such documents so obtained will be non-binding on the State and be cause for breach of contract.

2.19 - Service Performance

All services performed under contract shall be in accordance with the terms and conditions of the contract. It will be the agency’s responsibility to ensure that such services rendered are performed and are acceptable.

The relationship between the State and the Contractor is that of client and independent Contractor. No agent, employee, or servant of the Contractor or any of its subcontractors shall be or shall be deemed to be an employee, agent, or servant of the State for any reason. The Contractor will be solely and entirely

Document Description Page 13 responsible for its acts and the acts of its agents, employees, servants and subcontractors during the performance of this Contract.

Deviations of services performed will not be made without the written approval of the KYTC Division of Purchases. Problems that arise under any aspect of performance should first be resolved between the vendor and the agency. If such problems and/or disagreements cannot be resolved they should be referred to the KYTC Division of Purchases for mediation.

2.20 - Assignment

The vendor shall not assign this Master Agreement in whole or in part to another vendor at any time during the initial or optional renewal terms of the contract, without the consent, guidance and approval of the Commonwealth. Any assignment hereunder entered into, subsequent to the execution of the contract with the prime vendor, must be annotated and approved by the Commonwealth. Any purported assignment without this consent shall be null and void.

2.21 – Ethics Compliance

Contractor certifies that contractor and its employees will not offer or provide gifts to KYTC employees in excess of $25.00 in any single calendar year as defined in KRS 11A.045 (1) and KYTC General Administration and Personnel Policy GAP-808. Moreover, contractor certifies that contractor and its employees will not offer any ticket to a sporting event to a KYTC employee without being reimbursed the face value amount for said ticket as defined in KRS 11A.045 (2).

It is agreed and understood that non-compliance with the above provisions may result in the suspension of vendor procurement participation, contract termination, and/or debarment.

2.22 - Termination of Contracts

A contract may be terminated for default by the vendor, for the convenience of the Commonwealth, or for lack of appropriation in accordance with 200 KAR 5:312.

2.23 - Endorsements

The Contractor shall not refer to the Award of Contract in commercial advertising in such a manner as to state or imply that the firm or its services are endorsed or preferred by the Commonwealth of Kentucky.

2.24 - Registration with the Secretary of State by a Foreign Entity

Pursuant to KRS 45A.480(1)(b), an agency, department, office, or political subdivision of the Commonwealth of Kentucky shall not award a state contract to a person that is a foreign entity required by KRS 14A.9-010 to obtain a certificate of authority to transact business in the Commonwealth (“certificate”) from the Secretary of State under KRS 14A.9-030.

For all foreign entities required to obtain a certificate of authority to transact business in the Commonwealth, if a copy of the certificate is not received within the time specified by the Division of Purchases, the foreign entity’s solicitation response may be deemed non-responsive. If the foreign entity is not required to obtain a certificate as provided in KRS 14A.9-010, the foreign entity should identify the applicable exception in its solicitation response. Foreign entity is defined within KRS 14A.1-070.

Vendors are required to remain in active and good standing during the life of the contract.

Businesses can register with the Secretary of State at https://secure.kentucky.gov/sos/ftbr/welcome.aspx

Document Description Page 14 https://secure.kentucky.gov/sos/ftbr/welcome.aspx

2.25 - Discrimination:

Discrimination (because of race, religion, color, national origin, sex, sexual orientation, gender identity, age, or disability) is prohibited. This section applies only to contracts utilizing federal funds, in whole or in part. During the performance of this contract, the contractor agrees as follows:

1. The contractor will not discriminate against any employee or applicant for employment because of race, religion, color, national origin, sex, sexual orientation, gender identity or age. The contractor further agrees to comply with the provisions of the Americans with Disabilities Act (ADA), Public Law 101-336, and applicable federal regulations relating thereto prohibiting discrimination against otherwise qualified disabled individuals under any program or activity. The contractor agrees to provide, upon request, needed reasonable accommodations. The contractor will take affirmative action to ensure that applicants are employed and that employees are treated during employment without regard to their race, religion, color, national origin, sex, sexual orientation, gender identity, age or disability. Such action shall include, but not be limited to the following: employment, upgrading, demotion or transfer; recruitment or recruitment advertising; layoff or termination; rates of pay or other forms of compensations; and selection for training, including apprenticeship. The contractor agrees to post in conspicuous places, available to employees and applicants for employment, notices setting forth the provisions of this non-discrimination clause.

2. The contractor will, in all solicitations or advertisements for employees placed by or on behalf of the contractor, state that all qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age or disability.

3. The contractor will send to each labor union or representative of workers with which he has a collective bargaining agreement or other contract or understanding, a notice advising the said labor union or workers' representative of the contractor's commitments under this section, and shall post copies of the notice in conspicuous places available to employees and applicants for employment. The contractor will take such action with respect to any subcontract or purchase order as the administering agency may direct as a means of enforcing such provisions, including sanctions for noncompliance.

4. The contractor will comply with all provisions of Executive Order No. 11246 of September 24, 1965 as amended, and of the rules, regulations and relevant orders of the Secretary of Labor.

5. The contractor will furnish all information and reports required by Executive Order No. 11246 of September 24, 1965, as amended, and by the rules, regulations and orders of the Secretary of Labor, or pursuant thereto, and will permit access to his books, records and accounts by the administering agency and the Secretary of Labor for purposes of investigation to ascertain compliance with such rules, regulations and orders.

6. In the event of the contractor's noncompliance with the nondiscrimination clauses of this contract or with any of the said rules, regulations or orders, this contract may be cancelled, terminated or suspended in whole or in part and the contractor may be declared ineligible for further government contracts or federally-assisted construction contracts in accordance with procedures authorized in Executive Order No. 11246 of September 24, 1965, as amended, and such other sanctions may be imposed and remedies invoked as provided in or as otherwise provided by law.

7. The contractor will include the provisions of paragraphs (1) through (7) of section 202 of Executive Order 11246 in every subcontract or purchase order unless exempted by rules, regulations or orders of the Secretary of Labor, issued pursuant to section 204 of Executive Order No. 11246 of September 24, 1965, as amended, so that such provisions will be binding upon each subcontractor or vendor. The contractor will take such action with respect to any subcontract or purchase order as the administering agency may direct as a means of enforcing such provisions including sanctions for noncompliance;

provided, however, that in the event a contractor becomes involved in, or is threatened with, litigation with a subcontractor or vendor as a result of such direction by the agency, the contractor may request the United States to enter into such litigation to protect the interests of the United States.

2.26 - Kentucky Sales and Use Taxes

Document Description Page 15

Sales of tangible personal property or services to the State of Kentucky and its agencies are not subject to state sales or use taxes.

2.27 - Extension Period

This contract may be extended at the termination of all contract renewal periods for additional time not to exceed 90 days. This extension must be accompanied by the written approval of the vendor and the Division of Purchases

2.28 – Extension to Other Agencies

The Division of Purchases reserves the right, with the consent of the vendor, to offer this master agreement to other state agencies who may have need for the product(s) and/or service(s). Each state agency must obtain prior approval from the Finance Cabinet Office of Procurement Services.

If Contracts are used by state agencies other than the Transportation Cabinet, such responsibilities will be assumed by the user agency. All billing and payments for materials/services purchased from an agreement will be directly between the user agencies and Vendors.

2.29 - Extension to Political Subdivisions

The Division of Purchases reserves the right, with the consent of the vendor, to offer this master agreement to political subdivisions and local government entities who may have need for the product(s) and/or service(s). Prior approval from the Finance Cabinet is not required.

If Contracts are used by political subdivisions, such responsibilities will be assumed by the user agency.

All billing and payments for materials/services purchased from an agreement will be directly between the user agencies and Vendors.

2.30 - Access to Records

The contractor, as defined in KRS 45A.030 (9) agrees that the contracting agency, the Finance and Administration Cabinet, the Auditor of Public Accounts, and the Legislative Research Commission, or their duly authorized representatives, shall have access to any books, documents, papers, records, or other evidence, which are directly pertinent to this contract for the purpose of financial audit or program review. Records and other prequalification information confidentially disclosed as part of the bid process shall not be deemed as directly pertinent to the contract and shall be exempt from disclosure as provided in KRS 61.878(1)(c). The contractor also recognizes that any books, documents, papers, records, or other evidence, received during a financial audit or program review shall be subject to the Kentucky Open Records Act, KRS 61.870 to 61.884.

2.31 - Records Retention

The Finance and Administration Cabinet may inspect the place of business of the Vendor or any sub Vendor under the master Agreement contract awarded or to be awarded by the Commonwealth. In accordance with KRS 45A.150, the Finance and Administration Cabinet may audit the books and records of any person who has submitted cost or pricing data under KRS 45A.120 at any time until three years from the date of final payment under the prime contract, and by any subcontractor for a period of three years from the date of final payment under the subcontract. Such books and records shall be maintained by the contractor for a period of three years from the date of final payment under the contract and by any subcontractor for a period of three years from the date of final payment under the subcontract. The Finance and Administration Cabinet shall be entitled to audit the books and records of a contractor or any subcontractor under any negotiated contract or subcontract other than a firm fixed-price type contract, provided, however, that this provision shall not limit the right to audit stated above. Such books and records shall be maintained by the contractor for a period of three years from the date of final payment under the prime contract and by the subcontractor for a period of three years from the date of final

Document Description Page 16 payment under the subcontract. The contractor shall place such the same audit requirement in any agreement it may have with a subcontractor under this contract.

2.32 - Governing Law

This Contract shall be governed by and construed in accordance with the laws of the Commonwealth of Kentucky and any litigation with respect to this Contract shall be brought in state or federal court in Franklin County, Kentucky in accordance with KRS 45A.

Section 3 - General Information

3.00 - Issuing Office

The Division of Purchases is the only office authorized to change, modify, amend, alter, or clarify the specifications, terms and conditions of this RFB.

3.01 - Restrictions on Communications

The Division of Purchases contact named below shall be the sole point of contact throughout the procurement process. All communications, oral and written (regular mail, express mail, electronic mail, or fax), concerning this procurement shall be addressed to:

Lanessia McCourt

502 / 564-4630

Fax – 502 / 564-7069

E-mail – Lanessia.mccourt@ky.gov

From the issue date of this RFB until a Contractor(s) is selected and the selection is announced, Offerors are not allowed to communicate with any Commonwealth Staff concerning this RFB except:

(a) The sole point of contact cited in this RFB; or

(b) Via written questions submitted to the sole point of contact

Potential bidders should clearly understand that any verbal representations made or assumed to be made during any oral discussions held between representatives of potential bidders and any State employee or official are not binding on the Commonwealth of Kentucky.

The Commonwealth reserves the right to reject the bid response for any violation of this provision.

This provision does not preclude bidders who presently hold contracts with the Commonwealth from communicating with state agencies regarding existing contracts.

3.02 - Schedule of RFB Activities

The following schedule presents the major activities associated with the RFB distribution, written questions, and bid submission. The Commonwealth reserves the right at its sole discretion to change the Schedule of Activities, including the associated dates and times.

Deadline for written questions

All questions shall submitted in writing by the date and time specified.

No questions shall be accepted after the date/time listed unless the

January 12, 2023 by 4:00pm (EST)

Document Description Page 17 question(s) is considered material to the procurement. Oral questions will not be accepted at any time except for bid procedural clarifications. The Commonwealth will respond to salient questions in writing by issuing an Addendum to the Solicitation.

Commonwealth’s response to written questions

The Addendum shall be posted to the Commonwealth’s e-Procurement web site.

January 13, 2023 by 4:00pm (EST)

Bids due by 1:30 pm

BIDS WILL ONLY BE ACCEPTED ELECTRONICALLY THROUGH OUR

PROCUREMENT SYSTEM.

See page 1 for Closing Date.

Tentative Award Date January 31,2023

NOTE: All times referenced are Eastern Time Zone

3.03 - Access to Solicitation and Solicitation Addenda

The Commonwealth wants each prospective Offeror to have full and complete information on which to base a bid response. Only information presented or referred to in this RFB and any additional written information that is supplied by the Division of Purchases shall be used by Offerors in preparing a response to this RFB.

The Solicitation and any Addenda shall be posted to the e-Procurement web site at https:// emars311.ky.gov.

To view/download Solicitation documents from the Kentucky Vendor Self Service site

Please note: It is not necessary to register to access the solicitations. Unregistered vendors can access the solicitations by clicking on guest access. However, you must be registered and logged in to submit a response.

Step 1 - Click Guest Access- located on the left of the screen, You will be taken directly to list of solicitations organized by closing date.

Step 2 – Keyword Search - Vendors can use the keyword field search to narrow your search. Type in keyword and click the advanced search button, select status open then click the go button or click the next button to page through all the open solicitations.

Step 3 - Click the details button under the RFB/RFP document number

Step 4 - Click the Attachments tab to see all attachments related to that particular solicitation document

Step 5 - Click the link for each file name, a new window will appear, click open to open/view the file. Once the file opens, click the print icon to print that file attachment. Close that file attachment then repeat steps to open and print each different file attachment. It is the vendor’s responsibility to view and/or print all file attachments for a solicitation document.

Please note: some solicitations may have multiple file attachments.

Check this web site periodically for any updates that may be posted to the Solicitation. It is the responsibility of the vendor to obtain copies of all information and forms.

3.04 - Bid Submission Requirements

Vendors shall submit bids through the eProcurement System.

Link: https://emars311.ky.gov/webapp/vssprdonline3111d/AltSelfService

Document Description Page 18

2300000383 Freeze-Thaw Machine https://emars311.ky.gov https://emars311.ky.gov https://emars311.ky.gov/webapp/vssprdonline3111d/AltSelfService

***See attached document “How to Respond to an Online Bid through the Kentucky Vendor Self Service site (updated).pdf”***

An electronic bid shall be authorized by the proper agent of the firm by the act of submitting it electronically through the eProcurement system.

Bid information MUST be completed online. Response must contain all required information for the Solicitation. All bidders MUST be registered in the Commonwealth eProcurement System via the Vendor Self Service System at https://emars311.ky.gov/webapp/vssprdonline3111d/AltSelfService

Allow 24 – 48 hours to complete Vendor Registration. Vendors must be logged in to their Vendor Self Service (VSS) account in order to submit a response. Registrations completed the day of bid closing must be completed by the Vendor in the VSS portal. The Customer Resource Center is not able to complete registrations and activate accounts on the same day. Closing dates will not be extended for Vendors not registered by the date/time of the bid closing. Vendor Self Registration Guides are provided at https:// finance.ky.gov/eProcurement/Pages/doing-business-with-the-commonwealth.aspx

All bidders are cautioned to begin their electronic submission in sufficient time to complete before the closing date and time. Delays due to technical difficulties or document upload impediments shall not be justification for acceptance of a late bid or proposal. Vendor attention to this advisory is encouraged. If you need assistance, please contact the Customer Resource Center (CRC) by email at Finance.CRCGroup@ky.gov or phone 502-564-9641 or toll-free 877-973-

HELP (4357).

BID…