Statement of Work-chip compactor.pdf

PDF 61 KB Posted

Attached to
Chip Compactor Federal contract opportunity
Solicitation number
FE461002640026
Issued by
Department of the Air Force Space Command

View the file

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Statement of Work

The contractor shall provide and install a chip compactor capable of machining waste chips to a reduction rate of 20:1 by compressing large volumes of aluminum machining scrap into 4” resalable pucks. The chip compactor must meet or exceed the following specifications.

Suitable Materials Carbon, Copper, Stainless, Aluminum

Suitable Material Shapes Sawed Chips, Long Tightly Chips, Loosely Spiraled Chips

Press Force 110 tons

Size of Compacted Part 3.15” X *L 4”x*L

Compaction Pressure 28,304 psi at 3.15” Dia. 17,552 psi at 4” Dia.

Hopper Capacity (gal) 26.4 Gal. With Additional Extension 50.8 Gal.

1 Cycle time (sec) 30 (approx)

Hydraulic Motor 7.3 hp

Screw Motor (kw x p) Vertical: 0.77 x 4 / Horizontal: 0.4 x 4

Required Voltage AC200/220 60Hz 3Phase (460VAC requires optional transformer)

Power Requirements (kw) 8

File details come from the government source that posted it. Updated .