Synopsis FD20302400392.docx

The United States Air Force through Air Force Sustainment Center (AFSC), Tinker AFB 73145 is contemplating the Remanufacture of K-135 Valve Assembly and F-16 Regulating Valve. The contractor shall provide all labor, facilities, equipment and all material to accomplish remanufacture. The work encompasses the disassembly cleaning, inspection, maintenance re-assembly, testing, and finishing actions required to return the item to a like-new condition in accordance with the solicitation requirements and all attachments. A firm fixed price Indefinite Delivery Requirements type contract is contemplated with a three-year basic and two -one year options.

The requirements set forth in this notice are defined per Purchase Request FD20302400392 as follows:

Written response is required.

Item 0001: KC-135 Valve Assembly, 3 Year Basic plus Two - 1 Year Options; NSN: 1660-01-140-1978 P/N 979968-2-1; Applicable to C-130 aircraft for a best estimated quantity (BEQ) of Three-Year Basic – 10 each/year (30 total) and Option Year I – 5 each/year and Option Year II – 5 each/year.

Item 0002: F-16 Regulating Valve, Air, 3 Year Basic plus Two - 1 Year Options; NSN: 4810-01-345-1092 TP P/N 3213790-7-1; Applicable to F-16 aircraft for a best estimated quantity (BEQ) of Three-Year Base – 23 each/year (180 total) and Option Year I – 60 each/year, and Option Year II – 60 each/year.

Item 0003: F-16 Regulating Valve, Air, 3 Year Basic plus Two - 1 Year Options; NSN: 4810-01-345-1092 TP P/N 3213790-7-1; Applicable to F-16 aircraft for a best estimated quantity (BEQ) of Three-Year Base – 60 each/year (92 total) and Option Year I – 23 each/year, and Option Year II – 23 each/year.

Upgrade/Remanufacture

Input:

4810-01-052-0538 PN 3213790-5-1 5ea per year 4810-01-252-9429 PN 3213790-5-2 5ea per year 4810-01-142-6616 PN 3213790-6-1 5ea per year 4810-01-256-1982 PN 3213790-6-2 8ea per year

Output:

4810-01-345-1092 PN 3213790-7-1

Item 0004: Over and Above. To be negotiated.

Item 0005: Data (Not Separately Priced)

NSN: 1660-01-140-1978:

Function: This is for a four-inch diameter ejector shutoff and relief valve that controls bleed airflow to the ground ejector for cooling purposes during ground operation.

Delivery: 4 ea every 30 days after receipt of order (ARO) and reparable units. Delivery 4 each every 30 days thereafter; until production is complete. Early delivery is acceptable.

Ship To: DLA DISTRIBUTION DEPOT OKLAHOMA

3301 F AVE CEN REC BLDG 506 DR 22

TINKER AFB, OK

73145-8000

USA

NSN: 4810-01-345-1092TP:

Function: This requirement is a four-inch diameter ejector shutoff and relief valve that controls bleed airflow to the ground ejector for cooling purposes during ground operation.

Delivery: 6 ea every 30 days after receipt of order (ARO) and reparable units. Delivery 6 each every 30 days thereafter; until production is complete. Early delivery is acceptable.

Ship To: DLA DISTRIBUTION DEPOT OKLAHOMA

3301 F AVE CEN REC BLDG 506 DR 22

TINKER AFB, OK

73145-8000

USA

NSN: 4810-01-345-1092TP:

Function: This requirement is a four-inch diameter ejector shutoff and relief valve that controls bleed airflow to the ground ejector for cooling purposes during ground operation.

Delivery: 5 ea every 30 days after receipt of order (ARO) and reparable units. Delivery 5 each every 30 days thereafter; until production is complete. Early delivery is acceptable.

Ship To: DLA DISTRIBUTION DEPOT OKLAHOMA

3301 F AVE CEN REC BLDG 506 DR 22

TINKER AFB, OK

73145-8000

USA

Duration of Contract Period: 5 Year Requirements Contract (Three Year Basic with Two – 1 Year Options)

Qualification Requirements: QUALIFICATION REQUIREMENTS APPLY. Interested vendors that have not been previously qualified for this acquisition must submit a Source Approval Request (SAR) package to the Source Development, Small Business Office at 405-739-7243. As prescribed in FAR 9.202(e), the contracting officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification.

Part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from approve sources.

In order to receive any technical data related to this acquisition, offerors must send an email request to the Public Sales Office (AFLCMC.LZP.PubSales@us.af.mil). Release of any data is subject to applicable data rights. The request shall be on company letterhead and include the applicable solicitation number, the specific data needed (including TO and/or drawing numbers), and a copy of the current, approved DD Form 2345. The form, including instructions for completing the form, is available at: http://www.dtic.mil/whs/directives/infomgt/forms/forminfo/forminfopage2220.html.

The Government is not responsible for incomplete, misdirected, or untimely requests.**

Some units of items listed in Section B may, upon disassembly and/or inspection, be determined to be beyond repairable limits specified in the Work Specification and/or Technical Orders. Any cost for work performed by the Contractor, prior to determination that such equipment is beyond repairable limits, shall be included in the unit price(s) of the listed item(s). Condemned units will not be counted as production.

Export Control: N/A

This is a competitive requirement to approved Small Businesses.

The RMC is R1/C.

Set-aside: Set-Aside to approved Small Businesses.

The Government intends to issue solicitation FA8118-24-R-XXXX on or about 08 July 2024 with a closing response date of 07 August 2024 and estimated award date of on or about 26 October 2024. This notice does not in itself represent the issuance of a formal request for proposal and is not intended to be taken as such.

Based upon market research, the Government will not be using policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested parties may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice.

All questions regarding this notice are to be submitted in writing via E-mail. All questions submitted to this office are subject to be posted in this notice along with the appropriate response(s). Vendor identities will not be disclosed. Prospective offerors must comply with all the requirements of the solicitation and any attachments thereto to be considered responsive. All offerors are to specify in their response whether they are a large business, small business, small disadvantaged business, 8(a) concern, women-owned small business, HUBZone small business, veteran-owned small business or service-disabled veteran-owned small business. Also offerors must specify whether they are a U.S. or foreign-owned firm.

APPLICABLE TECHNICAL ORDERS

Specific Technical Orders

NOV 2013

BREAKDOWN/01 JUN 2010

BREAKDOWN/01 MAY 2022

General Technical Orders

OTHER PUBLICATIONS FOR INFORMATION PURPOSES ONLY

NOTE: These publications are for information purposes only.

Air Force Manuals

DoD/Air Force Forms

DD1574

DD1574-1

SERVICEABLE TAG – MATERIEL SERVICEABLE LABEL – MATERIEL

DD1577-2

DD1577-3

UNSERVICEABLE (REPAIRABLE) TAG – MATERIEL UNSERVICEABLE (REPAIRABLE) LABEL – MATERIEL

DD1577

DD1577-1

UNSERVICEABLE (CONDEMNED) TAG – MATERIEL UNSERVICEABLE (CONDEMNED) LABEL – MATERIEL

DD1575

DD1575-1

SUSPENDED TAG – MATERIEL SUSPENDED LABEL – MATERIEL

DD1694

AFMC FORM 158

REQUEST FOR VARIANCE (RFV)

PACKAGING REQUIREMENTS

CONTRACTOR DOCUMENTS

OMBUDSMAN (AUG 2005) (An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition). The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at 405-736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS.

Electronic procedures will be used for this solicitation. No telephone requests. Only written or emailed requests received directly from the requestor are acceptable.