Amendment FA811821R0032 0001.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

J

2. AMENDMENT/MODIFICATION NO.

FA8118-21-R-0032-0001

3. EFFECTIVE DATE

10 JUN 2021

4. REQUISITION/PURCHASE REQ. NO.

FD20302001382 01

5. PROJECT NO (If applicable)

6. ISSUED BY CODE

DEPARTMENT OF THE AIR FORCE, AFSC PZABB

3001 STAFF DR STE 1AC4 99A

TINKER AFB OK 73145-3303

BUYER: Eric Romero/AFSC/PZABB eric.romero.11@us.af.mil Phone: (405) 736- 5555

7. ADMINISTERED BY (If other than item 6) CODEFA8118

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

CODE

X

9A. AMENDMENT OF SOLICITATION NO.

FA811821R0032

9B. DATED (SEE ITEM 11)

27-APR-2021

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended. Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods. ( a ) By completing Items 8 and 15, and returning copies of the amendment; ( b ) By acknowledging receipt of this amendment on each copy of the offer submitted; or ( c ) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified. 16-JUL-2021 3:00 PM

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return 1 copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

15A. NAME AND TITLE OF SIGNER (Type or print)

15B. CONTRACTOR/OFFEROR

BY ________________________________________________________

(Signature of person authorized to sign)

15C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16B. UNITED STATES OF AMERICA

BY ____________________________________________________

(Signature of Contracting Officer)

16C. DATE SIGNED

FACILITY CODE

NSN 7540-01-152-8070

PREVIOUS EDITION UNUSABLE

30-105 STANDARD FORM 30 (REV. 10-83)

PRESCRIBED BY GSA

FAR (48 CFR) 53.243

X

X X

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

FA8118-21-R-0032-0001

Continuation of block 14. DESCRIPTION OF AMENDMENT/MODIFICATION

The purpose of this amendment is to provide updated Min/Max requirements and add revised Performance Work Statement (PWS).

First: Amendment FA811821R0032 0001 shall be used to submit proposals and replaces FA811821R0032 in its entirety.

Second: Performance work Statement (PWS) has been updated to add potentiometer to 100% replacement list, update is as follows;

From: PWS dated 19 April 2021

To: PWS dated 10 May 2021

Third: This closing date for this solicitation has been extended;

From: 15 June 2021, 3:00 pm CST

To: 16 July 2021, 3:00 pm CST

Fourth: All other terms and conditions remain unchanged.

FA8118‐21‐R‐0032‐0001

PART I ‐ THE SCHEDULE

SECTION B

SUPPLIES OR SERVICES AND PRICES/COSTS

OVERHAUL, TT&E and REPAIR

This solicitation contemplates the award of a ten year Indefinite Delivery Quantity (IDIQ) contract. Five year Basic and 5 year Option to be negotiated prior to end of basic contract.

(a) The contractor shall furnish all material, plant facilities, labor, parts, equipment, and expertise necessary to perform the Overhaul, calibration and functional test required to restore Government furnished repairables to a like‐new condition. The contractor shall also accomplish necessary packing and preservation and packaging and return to the Government in completely serviceable condition, at the unit price(s) established at the time of award, the items of Air Force equipment listed below, all in accordance with the provision hereof and the Work Specification in Section J hereof.

(b) Overhaul is the process of significantly or completely disassembling an item to its individual components; reworking, rehabilitating, or replacing worn or damaged components; reassembly; and test such that the item is returned to its original life expectancy (i.e. reliability), or nearly so.

(c) TT&E and Basic repair requirements in accordance with the PWS: All end items shall be cleaned, disassembled, components inspected, and tested according to applicable TOs and OEM specifications. Test, Teardown, Evaluate (TTE) shall be performed and shop findings report delivered to the government contracting officer (as described in paragraph 1.4.1).

The contracting officer will disseminate the shop findings report to the appropriate technical and logistics personnel for review. The government will, in return, provide instruction to the contractor concerning the continued course of action based on the asset condition and government demand for the asset. If the asset is determined to be repairable then repair activity shall follow the procedures as described in the TO or OEM procedures. Regardless of initial (TTE) results, a complete and full acceptance test of end‐item asset following reassembly is required to bring the asset to a serviceable condition. If any component part does not meet inspection requirements as specified in the applicable technical documents, or if there is any doubt as to its serviceability or longevity, the Contractor shall replace the component if it cannot be restored to a serviceable condition.

(d) End items that require only the parts from the 100% replacement list are to be considered for Basic Repair. All components shall be repaired to the latest configuration. The work encompasses cleaning, inspection, assembly, testing, and finishing actions required to return the repaired item to a serviceable condition. If any component part does not meet inspection requirements as specified in the applicable TO, or if there is any doubt as to its serviceability or longevity, the Contractor shall replace the component if it cannot be restored to the original life expectancy, or nearly so. The Contractor will be allowed to cannibalize from other units to allow as many basic repair as possible. Certain parts shall be replaced one‐hundred percent (100%) of the time during each repair event and are specified in section 5. The pricing for these items shall be included in the basic repair cost.

(e) A Pre‐Award Survey and/or Initial Production Evaluation (IPE) is required. Details are provided in Appendix A, paragraphs

1.2 and 1.3 respectively.

(f) Qualification requirements apply. Interested vendors that have not been previously qualified for this acquisition must submit a Source Approval Request (SAR) package to the Source Development, Small Business Office at 405‐739‐7243. As prescribed in

FAR 9.202(e), the contracting officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification.

(g) This acquisition may involve technology that has a military or space application. The only contractors who may participate are those that are certified and registered with the Defense Logistics Information Service (DLIS) (1‐800‐352‐3572) and have a legitimate business purpose. In order to receive any technical data related to this acquisition, offerors must be registered with

Beta.SAM at https://beta.sam.gov/ . Requests for data are to be submitted to aflcmc.ezgtp.PubSale@us.af.mil for Drawings and directly to the PCO and/or buyer for Technical Orders (TOs). The request shall be on company letterhead and include the applicable solicitation number and the specific data needed (e.g. TO number, drawing number). The request must be accompanied by a copy of the current and approved DD Form 2345. The form, including instructions for completing the form, is available at: http://www.dtic.mil/whs/directives/infomgt/forms/forminfo/forminfopage2220.html The Government is not responsible for misdirected, incorrect, or untimely requests.

(h) Commercial Asset Visibility Air Force (CAVAF) Reporting: CAV AF is a web based system used to permit the reporting of

Government Furnished Material (GFM) transactions during the execution of Contract Depot Maintenance contracts for the purpose of providing visibility of assets.

(i) The Service Contract Labor Standards (SCLS) formerly Service Contract Act (SCA) will be applicable to this effort.

(j) Option Year I for an additional 5 years period of performance will be negotiated, and a proposal will be requested one year prior to the base year ending.

(k) Dates listed in clauses DFARS 252.216‐7006 and FAR 52.216‐22 are based on the estimated award date. These dates will be updated prior to award based on the actual award date.

(l) Item Unique Identification (IUID) marking is required in accordance with DFARS 252.211‐7003. Contractor determined location and method of marking is acceptable.

(m) In the event that DFARS clause 252.217‐7001, Surge Option, is invoked, quantities and prices will be negotiated at that time.

(n) In the event there are component part(s) with long lead times, the awardee is responsible for securing necessary parts to meet the Government’s required delivery schedule.

(o) All parts in the 100% replacement part list shall be priced and purchased via CLIN 0001 for the entire 10 year contract.

(p) In accordance with FAR 6.302‐1, this solicitation is being sole sourced to Parker‐Hannifin.

Overhaul and Material Overlay

FIVE YEAR BASE PERIOD

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

5 EA

NSN: 4810‐01‐380‐9046 FW

VALVE ASSEMBLY,MANI

It is a vent control valve used to control both positive and negative pressure in the fuel tank during ascent and desecent.

Aluminum Alloy Manufacturer Part Number 59211 2880001‐105

81205 DAA3272P021‐105

92003 2880001‐105 Associated Document(s) Line Item(s)

FD20302001382 01 0001

Overhaul and Material Overlay

FIVE YEAR BASE PERIOD

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

AS9100 9100

IUID Required: Yes Latest Cost Amount: $60,620.53

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A TBD ORIGIN

Type / Ship To PACRN Mark For A TBD PAA IAW PMS Instructions Type / Ship To Quantity (U/I) *ARO Funded Order or Reparable Assets, Whichever is Later

Req No / Pri

Required Delivery

A TBD 5 EA *800 Calendar Days

Proposed Delivery

A TBD 5 EA

CLIN 0001 will be used to meet the 5 each MIN requirement for the entire base year of this contract.

All parts in the 100% replacement part list shall be priced, purchased and charged using CLIN 0001 for a quanity of 75 each to cover the entire 10 year contract. For additional information, reference para. 1.9.8 in Appendix A.

Shipping Instructions will be provided by the Production Management Specialist (PMS) prior to any shipments of serviceable assets. PMS information will be provided within each delivery order.

Overhaul Only

FIVE YEAR BASE PERIOD

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Amount

20 EA

Minimum Quantity

Overhaul Only

FIVE YEAR BASE PERIOD

5 EA

Maximum Quantity

35 EA

CLIN ACRN ACRN Total

0002 AA

NSN: 4810‐01‐380‐9046 FW

VALVE ASSEMBLY,MANI

Manufacturer Part Number

81205 DAA3272P021‐105

92003 2880001‐105 Associated Document(s) Line Item(s)

FD20302001382 01 0002

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

AS9100 9100

IUID Required: Yes Latest Cost Amount: $60,620.53

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A TBD ORIGIN

Type / Ship To PACRN Mark For

A TBD PAA IAW PMS

Type / Ship To Quantity (U/I) *ARO 2ea/30 days 24 months ARO and Reps Req No / Pri

Required Delivery

A TBD 2 EA *30 Calendar Days

Proposed Delivery

A TBD 2 EA

Pricing for CLIN 0002 shall not include 100% replacement parts cost.

The 100% replacement parts for 75 assets on this contract shall be purchased and charged during the first five Overhauled assets under CLIN 0001.

Shipping Instructions will be provided by the Production Management Specialist (PMS) prior to any shipments of serviceable assets. PMS information will be provided within each delivery order.

Teardown Test and Evaluate (TT&E)

FIVE YEAR BASE PERIOD

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price

10 EA

CLIN ACRN ACRN Total

0003 AA

NSN: 4810‐01‐380‐9046 FW

VALVE ASSEMBLY,MANI

Manufacturer Part Number

81205 DAA3272P021‐105

92003 2880001‐105 Associated Document(s) Line Item(s)

FD20302001382 01 0003

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

AS9100 9100

Latest Cost Amount: $60,620.53

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A TBD ORIGIN

Type / Ship To PACRN Mark For

A TBD PAA IAW PMS

Type / Ship To Quantity (U/I) *ARO Funded Order or Reparable Assets, Whichever is Later

Req No / Pri

Required Delivery

A TBD 2 EA *30 Calendar Days

Proposed Delivery

A TBD 2 EA

TT&E will only be utilized when an assets is sent for repair.

Shipping Instructions will be provided by the Production Management Specialist (PMS) prior to any shipments of serviceable assets. PMS information will be provided within each delivery order.

Repair

FIVE YEAR BASE PERIOD

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Amount

1 EA To be Negotiated

NSN: 4810‐01‐380‐9046 FW

VALVE ASSEMBLY,MANI

Manufacturer Part Number

81205 DAA3272P021‐105

92003 2880001‐105 Associated Document(s) Line Item(s)

FD20302001382 01 0004

Priority: R Latest Cost Amount: $60,620.53 Type / Ship To PACRN Mark For

PAA IAW PMS

Type / Ship To Quantity (U/I) TBN Req No / Pri

Required Delivery

1 EA TBN

Proposed Delivery

1 EA

Pricing for repairs shall be negotiated (TBN) after completion of TT&E.

Shipping Instructions will be provided by the Production Management Specialist (PMS) prior to any shipments of serviceable assets. PMS information will be provided within each delivery order.

Over and Above

FIVE YEAR BASE PERIOD

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount 1 LO To be Negotiated

Over and Above

DESCRIPTION

“Over and above work” means work discovered during the course of performing overhaul, maintenance, and repair efforts that is –

(i) Within the general scope of the contract;

(ii) Not covered by the line item(s) for the basic work under the contract; and

(iii) Necessary in order to satisfactorily complete the contract.

Over and Above

FIVE YEAR BASE PERIOD

“Over and above work” shall be performed IAW the Appendix A and DFARS clause 252.217‐7028. The Government shall be the sole authority to determine whether over and above work is appropriate. When over and above work is required a subCLIN shall be established on the order for authorization and funding. Delivery will be as negotiated between the Contractor and ACO/PCO.

FIXED PRICED ITEMS

At any time during contract performance, when sufficient data becomes available on a repetitive task being performed, either the Contractor or the Contracting Officer (Administrative or Procuring) may request a negotiation to establish a firm‐fixed‐price for that item for the remaining life of the contract.

Fixed priced items shall be defined as they are negotiated.

Associated Document(s) Line Item(s)

FD20302001382 01 0005

Priority: R

DATA

FIVE YEAR BASE PERIOD

Item No.

Not Separately Priced Quantity U/I Unit Price

1 NSP

Data DATA, IAW CAV AF Reporting

EXHIBIT

ITEM

NO.

RELATED LINE

ITEM NO. DID QTY UNIT

UNIT

PRICE TOTAL PRICE

A A001 0001 ‐ 0004 CAV AF End Item Reporting 1 LO NSP NSP

A A002 0001 ‐ 0004 Contract Depot Maintenance (CDM) Production Report 1 LO NSP NSP

A A003 0001 ‐ 0004 Government Property Inventory

Report 1 LO NSP NSP

A A004 0001 ‐ 0004 Production Surge Plan 1 LO NSP NSP

NSP ‐ Not Separately Priced

SEE DFARS 252.204‐7002, Payment for Sub‐line Items Not Separately Priced The award of any or all reports shall be at the sole discretion of the Government. The Government reserves the right to delete from the bid price each line item of data and/or reports that the Government does not desire prior to and after final award.

Associated Document(s) Line Item(s)

FD20302001382 01 0006

Priority: R

Overhaul Only

FIVE YEAR, OPTION YEAR I

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Amount

20 EA

Minimum Quantity

5 EA

Maximum Quantity

35 EA

NSN: 4810‐01‐380‐9046 FW

VALVE ASSEMBLY,MANI

Manufacturer Part Number

81205 DAA3272P021‐105

92003 2880001‐105 Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

AS9100 9100

IUID Required: Yes Latest Cost Amount: $60,620.53

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A TBD ORIGIN

Type / Ship To PACRN Mark For

A TBD PAA IAW PMS

Type / Ship To Quantity (U/I) *ARO 2ea/30 days 24 months ARO and Reps Req No / Pri

Required Delivery

A TBD 2 EA *30 Calendar Days

Proposed Delivery

A TBD 2 EA

Option Year I for an additional 5 year period of performance is to be negotiated (TBN), and a proposal will be requested one year prior to the base year ending.

Pricing for CLIN 1001 shall not include 100% replacement parts cost.

The 100% replacement parts for 75 assets on this contract were purchased and charged during the first five Overhauled assets under CLIN 0001.

Shipping Instructions will be provided by the Production Management Specialist (PMS) prior to any shipments of serviceable assets. PMS information will be provided within each delivery order.

Teardown Test and Evaluate (TT&E)

FIVE YEAR, OPTION YEAR I

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Amount

10 EA

Minimum Quantity

5 EA

Maximum Quantity

35 EA

NSN: 4810‐01‐380‐9046 FW

VALVE ASSEMBLY,MANI

Manufacturer Part Number

81205 DAA3272P021‐105

92003 2880001‐105 Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

AS9100 9100

Latest Cost Amount: $60,620.53

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A TBD ORIGIN

Type / Ship To PACRN Mark For

A TBD PAA IAW PMS

Type / Ship To Quantity (U/I) *ARO Funded Order or Reparable Assets, Whichever is Later

Req No / Pri

Required Delivery

A TBD 2 EA *30 Calendar Days

Proposed Delivery

Teardown Test and Evaluate (TT&E)

FIVE YEAR, OPTION YEAR I

A TBD 2 EA

TT&E will only be utilized when an assets is sent for repair.

Shipping Instructions will be provided by the Production Management Specialist (PMS) prior to any shipments of serviceable assets. PMS information will be provided within each delivery order.

Repair

FIVE YEAR, OPTION YEAR I

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Amount

1 EA To be Negotiated

NSN: 4810‐01‐380‐9046 FW

VALVE ASSEMBLY,MANI

Manufacturer Part Number

81205 DAA3272P021‐105

92003 2880001‐105 Priority: R Latest Cost Amount: $60,620.53 Type / Ship To PACRN Mark For

PAA IAW PMS

Type / Ship To Quantity (U/I) TBN Req No / Pri

Required Delivery

1 EA TBN

Proposed Delivery

1 EA

Pricing for repairs shall be negotiated (TBN) after completion of TT&E.

Shipping Instructions will be provided by the Production Management Specialist (PMS) prior to any shipments of serviceable assets. PMS information will be provided within each delivery order.

Over and Above

FIVE YEAR, OPTION YEAR I

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Amount

Over and Above

FIVE YEAR, OPTION YEAR I

1 LO To be Negotiated

Over and Above

DESCRIPTION

“Over and above work” means work discovered during the course of performing overhaul, maintenance, and repair efforts that is –

(i) Within the general scope of the contract;

(ii) Not covered by the line item(s) for the basic work under the contract; and

(iii) Necessary in order to satisfactorily complete the contract.

“Over and above work” shall be performed IAW the Appendix A and DFARS clause 252.217‐7028. The Government shall be the sole authority to determine whether over and above work is appropriate. When over and above work is required a subCLIN shall be established on the order for authorization and funding. Delivery will be as negotiated between the Contractor and ACO/PCO.

FIXED PRICED ITEMS

At any time during contract performance, when sufficient data becomes available on a repetitive task being performed, either the Contractor or the Contracting Officer (Administrative or Procuring) may request a negotiation to establish a firm‐fixed‐price for that item for the remaining life of the contract.

Fixed priced items shall be defined as they are negotiated.

Priority: R

DATA

FIVE YEAR, OPTION YEAR I

Item No.

Not Separately Priced Quantity U/I Unit Price

1 LO NSP

Data DATA, IAW CAV AF Reporting

EXHIBIT

ITEM

NO.

RELATED LINE

ITEM NO. DID QTY UNIT

UNIT

PRICE TOTAL PRICE

B B001 1001 ‐ 1004 CAV AF End Item Reporting 1 LO NSP NSP

B B002 1001 ‐ 1004 Contract Depot Maintenance (CDM) Production Report 1 LO NSP NSP

B B003 1001 ‐ 1004 Government Property Inventory

Report 1 LO NSP NSP

B B004 1001 ‐ 1004 Production Surge Plan 1 LO NSP NSP

NSP ‐ Not Separately Priced

DATA

FIVE YEAR, OPTION YEAR I

SEE DFARS 252.204‐7002, Payment for Sub‐line Items Not Separately Priced The award of any or all reports shall be at the sole discretion of the Government. The Government reserves the right to delete from the bid price each line item of data and/or reports that the Government does not desire prior to and after final award.

Priority: R

SHIP TO / PLACE OF PERFORMANCE

TYPE/CODE: A TBD

TO BE DETERMINED 00000‐0000

MARK FOR: (See Individual Line Item) REQUISITION NUMBER: (See Individual Line Item) REQUISITION PRIORITY: (See Individual Line Item)

AWARD NUMBER:

PART I ‐ THE SCHEDULE

SECTION E

INSPECTION AND ACCEPTANCE

52.246‐11 HIGHER‐LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)

(IAW FAR 46.311, DFARS 246.202‐4(1))

(a) The Contractor shall comply with the higher‐level quality standard(s) listed below. [If more than one standard is listed, the offeror shall indicate its selection by checking the appropriate block.]*

Title Number Date Tailoring

*See Individual Line Item Schedule

(Applicable only if specified in the individual order/call issued hereunder)

52.246-16 RESPONSIBILITY FOR SUPPLIES (APR 1984)

(IAW FAR 46.316)

(Applicable to the furnishing of supplies, services involving the furnishing of supplies, or research and development, when a fixed‐price contract is contemplated and the contract amount is expected to exceed the simplified acquisition threshold)

INSPECTION AND ACCEPTANCE (SEP 1999)

(IAW FAR 46.401(b), FAR 46.503)

(Applicable to all orders issued hereunder)

Government Contract Quality Assurance Inspection and Acceptance will be at (Final):

[CONTRACTOR FILL‐IN]

Item No(s): See schedule for items with the following code(s) listed below :

Inspection Code and Address:

PART I ‐ THE SCHEDULE

SECTION F

DELIVERIES OR PERFORMANCE

52.242-15 STOP-WORK ORDER (AUG 1989)

(IAW FAR 42.1305(b)(1))

(Applicable for supplies, services, or research and development)

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984)

(IAW FAR 42.1305(c))

(Applicable to fixed‐price for supplies other than commercial or modified‐commercial items)

52.247-30 F.O.B. ORIGIN, CONTRACTOR'S FACILITY (FEB 2006)

(IAW FAR 47.303-2(c))

(Applicable to f.o.b. origin at contractor's facility)

52.247-65 F.O.B. ORIGIN, PREPAID FREIGHT--SMALL PACKAGE SHIPMENTS (JAN 1991)

(IAW FAR 47.303-17(f))

(Applicable when specifying f.o.b. origin)

F.O.B. ORIGIN (OCT 1993)

(IAW FAR 47.305(b))

Any supply item applicable to this document shall be delivered F.O.B. at:

F.O.B. Address

[CONTRACTOR FILL‐IN]

(Applicable when delivery term is f.o.b. origin)

PART I ‐ THE SCHEDULE

SECTION G

CONTRACT ADMINISTRATION DATA

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)

(IAW DFARS 232.7004(b), PGI 232.7004(b)(1), DFARS 212.301(f)(liii))

(f)WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

(Contracting Officer: Insert applicable document type(s).

Note: If a “Combo” document type is identified but not supportable by the Contractor’s business systems, an “Invoice” (stand‐alone) and “Receiving Report” (stand‐alone) document type may be used instead.)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

(Contracting Officer: Insert inspection and acceptance locations or “Not applicable.”)

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC

Issue By DoDAAC

Admin DoDAAC

Inspect By DoDAAC

Ship To Code

Ship From Code

Mark For Code

Service Approver (DoDAAC)

Service Acceptor (DoDAAC)

Accept at Other DoDAAC

LPO DoDAAC

DCAA Auditor DoDAAC

Other DoDAAC(s)

(*Contracting Officer: Insert applicable DoDAAC information or “See schedule” if multiple ship to/acceptance locations apply, or “Not applicable.”)

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back‐up documentation, as defined in DFARS Appendix F, (e.g.

timesheets) in support of each payment request.

(5)WAWF email notifications. The Contractor shall enter the e‐mail address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

(Contracting Officer: Insert applicable email addresses or “Not applicable.”)

(g)WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

(Contracting Officer: Insert applicable information or “Not applicable.”)

(2) For technical WAWF help, contact the WAWF helpdesk at 866‐618‐5988.

ACCOUNTING AND APPROPRIATION DATA (AUG 1998)

Accounting and Appropriation Chargeable ACRN Funds Citation Amount Chargeable

AA TO BE CITED ON EACH INDIVIDUAL ORDER $0.00

ACRN TOTAL $ 0.00

ACTIVITY ADDRESS CODE/ROUTING IDENTIFIER CODE (RIC) (MAR 2010)

(IAW AFI 24-230, DoD 4000.25-6M)

(a) The Contractor shall identify any existing Activity Address Code with the designated activity type (EB, ED, EJ, EP, EY or EZ) code, which applies to Contractor's approved F.O.B point when receiving, taking custody, issuing, or shipping DoD assets.

Include existing Routing Identifier Code (RIC), which may be required for accessing Government Data Systems.

(b) Offeror shall insert the existing Activity Address Code and RIC Code, or identify that the Contracting Officer will need to obtain an Activity Address Code and/or Routing Identifier Code (RIC) on contractor’s behalf.

Existing Activity Address Code __________________

Existing Routing Identifier Code (RIC) ________________

[ ] I currently do not possess an Activity Address Code for the designated activity type. Use the following address to obtain the Activity Address Code:

[ ] I currently do not possess a Routing Identifier Code (RIC) for the designated activity type.

PART II ‐ CONTRACT CLAUSES

SECTION I

CONTRACT CLAUSES

252.201-7000 CONTRACTING OFFICER'S REPRESENTATIVE (DEC 1991)

(IAW DFARS 201.602-70)

(Applicable to all orders issued hereunder)

5352.201-9101 OMBUDSMAN (OCT 2019)

(IAW AFFARS 5301.9103)

(c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman, AFSC/PZC at 405 736 ‐3273 , FAX 000 000 ‐0000 , email . Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/SMC ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330‐1060, phone number (571) 256‐2395, facsimile number (571) 256‐2431.

(Applicable to all solicitations and contracts)

52.202-1 DEFINITIONS (JUN 2020)

(IAW FAR 2.201)

(Applicable when the simplified acquisition threshold is exceeded)

52.203-3 GRATUITIES (APR 1984)

(IAW FAR 3.202)

(Applicable when simplified acquisition threshold is exceeded, except for personal services and those between military departments or defense agencies and foreign governments that do not obligate any funds appropriated to the Department of Defense)

52.203-5 COVENANT AGAINST CONTINGENT FEES (MAY 2014)

(IAW FAR 3.404)

(Applicable when simplified acquisition threshold is exceeded other than those for commercial items (see Parts 2 and 12))

52.203-6 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT (JUN 2020)

(IAW FAR 3.503-2)

(Applicable when the simplified acquisition threshold is exceeded)

52.203-7 ANTI-KICKBACK PROCEDURES (JUN 2020)

(IAW FAR 3.502-3)

(Applicable when the simplified acquisition threshold is exceeded)

52.203-8 CANCELLATION, RESCISSION, AND RECOVERY OF FUNDS FOR ILLEGAL OR

IMPROPER ACTIVITY (MAY 2014)

(IAW FAR 3.104-9(a))

(Applicable when noncommercial and the simplified acquisition threshold is exceeded)

52.203-10 PRICE OR FEE ADJUSTMENT FOR ILLEGAL OR IMPROPER ACTIVITY (MAY 2014)

(IAW FAR 3.104-9(b))

(Applicable when the simplified acquisition threshold is exceeded)

52.203-12 LIMITATION ON PAYMENTS TO INFLUENCE CERTAIN FEDERAL TRANSACTIONS

(JUN 2020)

(IAW FAR 3.808(b))

(Applicable over $150,000)

52.203-13 CONTRACTOR CODE OF BUSINESS ETHICS AND CONDUCT (JUN 2020)

(IAW FAR 3.1004(a))

(Applicable to solicitations and contracts exceeding $5.5 million and the period of performance is greater than 120 days, unless for the acquisition of a commercial item under Part 12 or performed entirely outside the U.S.)

52.203-19 PROHIBITION ON REQUIRING CERTAIN INTERNAL CONFIDENTIALITY

AGREEMENTS OR STATEMENTS (JAN 2017)

(IAW FAR 3.909-3 (b))

(Applicable in all solicitations and resultant contracts other than personal services contracts with individuals)

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS

(SEP 2011)

(IAW DFARS 203.171-4(a), DFARS 212.301(f)(ii))

(Applicable to all solicitations and contracts)

252.203-7001 PROHIBITION ON PERSONS CONVICTED OF FRAUD OR OTHER

DEFENSE-CONTRACT-RELATED FELONIES (DEC 2008)

(IAW DFARS 203.570-3)

(Applicable when exceeding the simplified acquisition threshold (except for commercial items))

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS

(SEP 2013)

(IAW DFARS 203.970)

(Applicable to all solicitations and contracts)

252.203-7003 AGENCY OFFICE OF THE INSPECTOR GENERAL (AUG 2019)

(IAW DFARS 203.1004(a), DFARS 212.301(f)(iii))

(Applicable to solicitations and contracts when FAR 52.203‐13 is included)

252.203-7004 DISPLAY OF HOTLINE POSTERS (MAY 2019)

(IAW DFARS 203.1004(b)(2)(ii))

(Applicable to acquisitions over $5.5 million, except for commercial items)

52.204-4 PRINTED OR COPIED DOUBLE-SIDED ON RECYCLED PAPER (MAY 2011)

(IAW FAR 4.303)

(Applicable when the simplified acquisition threshold is exceeded)

52.204-10 REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT

AWARDS (JUN 2020)

(IAW FAR 4.1403(a))

(Applicable over $30,000, unless not required to be reported in FPDS)

52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (OCT 2018)

(IAW FAR 4.1105(b))

(Applicable to solicitations that contain the provision at 52.204‐7, and resulting contracts)

52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE (AUG 2020)

(IAW FAR 4.1804(c), FAR 12.301(d))

(Applicable when there is a requirement to be registered in SAM or to have a DUNS Number)

52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS

(DEC 2014)

(IAW FAR 4.1202(b))

(Applicable to all solicitations and contracts)

52.204-21 BASIC SAFEGUARDING OF COVERED CONTRACTOR INFORMATION SYSTEMS

(JUN 2016)

(IAW FAR 4.1903)

(Applicable to all solicitations and contracts, except COTs, when a contractor’s system may contain Federal contract information)

52.204-23 PROHIBITION ON CONTRACTING FOR HARDWARE, SOFTWARE, AND SERVICES

DEVELOPED OR PROVIDED BY KASPERSKY LAB AND OTHER COVERED ENTITIES

(JUL 2018)

(IAW FAR 4.2004)

(Applicable on all contracts and solicitations.)

52.204-25 PROHIBITION ON CONTRACTING FOR CERTAIN TELECOMMUNICATIONS AND

VIDEO SURVEILLANCE SERVICES OR EQUIPMENT (AUG 2020)

(IAW 4.2105(b))

252.204-7002 PAYMENT FOR SUBLINE ITEMS NOT SEPARATELY PRICED (APR 2020)

(IAW DFARS 204.7109(a))

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992)

(IAW DFARS 204.404-70(b))

(Applicable to all orders issued hereunder)

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT

REPORTING (DEC 2019)

(IAW DFARS 204.7304(c))

(Applicable to all solicitations and contracts, including commercial except when solely for commercial‐off‐the‐shelf items)

252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION FOR LITIGATION

SUPPORT (MAY 2016)

(IAW DFARS 204.7403(b), DFARS 212.301(f)(i)(F))

(Applicable to solicitations and contracts that involve litigation support services when 252.204‐7014 is not included)

252.204-7018 PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE

TELECOMMUNICATIONS EQUIPMENT OR SERVICES (JAN 2021)

(IAW DFARS 204.2105(c))

(Applicable to all soliciations.)

252.204-7020 NIST SP 800-171 DOD ASSESSMENT REQUIREMENTS (NOV 2020)

(IAW DFARS 204.7304(e))

(Applicable in all solicitations and contracts, task orders, or delivery orders, including those using FAR part 12 procedures for the acquisition of commercial items, except for those that are solely for the acquisition of COTS items)

252.205-7000 PROVISION OF INFORMATION TO COOPERATIVE AGREEMENT HOLDERS

(DEC 1991)

(IAW DFARS 205.470, DFARS 212.301(f)(x))

(Applicable over $1,000,000)

52.209-1 QUALIFICATION REQUIREMENTS (FEB 1995)

(IAW FAR 9.206-2)

(a) Definition: "Qualification Requirement," as used in this clause, means a Government requirement for testing or other quality assurance demonstration that must be completed before award.

(b) One or more qualification requirements apply to the supplies or services covered by this contract. For those supplies or services requiring qualification, whether the covered product or service is an end item, the product, manufacturer, or source must have demonstrated that it meets the standards prescribed for qualification before award of this contract. The product, manufacturer, or source must be qualified at the time of award whether or not the name of the product, manufacturer, or source is actually included on a qualified products list, qualified manufacturers list, or qualified bidders list. Offerors should contact the agency activity designated below to obtain all requirements that they or their products or services, or their subcontractors or their products or services, must satisfy to become qualified and to arrange for an opportunity to demonstrate their abilities to meet the standards specified for qualification.

Item No Agency Name/Address

(c) If an offeror, manufacturer, source, product or service covered by a qualification requirement has already met the standards specified, the relevant information noted below should be provided.

Offeror's Name ______________________________

Manufacturer's Name _________________________

Source's Name ______________________________

Item Name _________________________________

Service Identification _________________________

Test Number _______________________________ (to the extent known)

(d) Even though a product or service subject to a qualification requirement is not itself an end item under this contract, the product, manufacturer, or source must nevertheless be qualified at the time of award of this contract. This is necessary whether the Contractor or a subcontractor will ultimately provide the product or service in question. If, after award, the Contracting Officer discovers that an applicable qualification requirement was not in fact met at the time of award, the Contracting Officer may either terminate this contract for default or allow performance to continue if adequate consideration is offered and the action is determined to be otherwise in the Government's best interests.

(e) If an offeror, manufacturer, source, product, or service has met the qualification requirement but is not yet on a qualified products list, qualified manufacturers list, or qualified bidders list, the offeror must submit evidence of qualification prior to award of this contract. Unless determined to be in the Government's interest, award of this contract shall not be delayed to permit an offeror to submit evidence of qualification.

(f) Any change in location or ownership of the plant where a previously qualified product or service was manufactured or performed requires reevaluation of the qualification. Similarly, any change in location or ownership of a previously qualified manufacturer or source requires reevaluation of the qualification. The reevaluation must be accomplished before the date of award.

(The above Clause/Provision has been modified.)

52.209-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH

CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT

(JUN 2020)

(IAW FAR 9.409)

(Applicable when exceeding $35,000)

52.209-9 UPDATES OF PUBLICLY AVAILABLE INFORMATION REGARDING RESPONSIBILITY

MATTERS (OCT 2018)

(IAW FAR 9.104-7(c))

(Applicable to solicitations and contracts over $550,000 and contracts where the offeror has checked “has” in paragraph (b) clause 52.209‐7)

52.209-10 PROHIBITION ON CONTRACTING WITH INVERTED DOMESTIC CORPORATIONS

(NOV 2015)

(IAW FAR 9.108-5(b))

(Applicable to all solicitations and contracts for the acquisition of products and services (including construction) unless waived

IAW FAR 9.108‐4)

252.209-7004 SUBCONTRACTING WITH FIRMS THAT ARE OWNED OR CONTROLLED BY THE

GOVERNMENT OF A COUNTRY THAT IS A STATE SPONSOR OF TERRORISM

(MAY 2019)

(IAW DFARS 209.409)

(Applicable to solicitations and contracts with a value of $150,000 or more)

252.209-7009 ORGANIZATIONAL CONFLICT OF INTEREST--MAJOR DEFENSE ACQUISITION

PROGRAM (MAY 2019)

(IAW DFARS 209.571-8(b))

(Applicable to solicitations and contracts for systems engineering and technical assistance for major defense acquisition programs or pre‐major defense acquisition programs)

5352.209-9000 ORGANIZATIONAL CONFLICT OF INTEREST (OCT 2019)

(IAW AFFARS 5309.507-2)

(Applicable when the contractor will be providing systems engineering and/or technical direction)

5352.209-9000 ORGANIZATIONAL CONFLICT OF INTEREST--ALTERNATE III (OCT 2019)

(IAW AFFARS 5309.507-2(a)(3))

(Applicable when the contractor will be obtaining access to proprietary information)

5352.209-9000 ORGANIZATIONAL CONFLICT OF INTEREST--ALTERNATE V (OCT 2019)

(IAW AFFARS 5309.507-2(a)(6))

(Applicable when the contract provides for delivery orders)

5352.209-9000 ORGANIZATIONAL CONFLICT OF INTEREST--ALTERNATE VI (OCT 2019)

(IAW AFFARS 5309.507-2(a)(7))

(Applicable when it is necessary to have the restrictions of this clause included in all or some subcontracts, teaming arrangements and other agreements calling for performance of work related to the contract)

52.210-1 MARKET RESEARCH (JUN 2020)

(IAW FAR 10.003)

(Applicable to solicitations and contracts over $5.5 million for the procurement of items other than commercial items)

52.211-5 MATERIAL REQUIREMENTS (AUG 2000)

(IAW FAR 11.304)

(Applicable to supplies that are not commercial items)

52.211-15 DEFENSE PRIORITY AND ALLOCATION REQUIREMENTS (APR 2008)

(IAW FAR 11.604(b))

This is a rated order certified for national defense, emergency preparedness, and energy program use, and the Contractor shall follow all the requirements of the Defense Priorities and Allocations System regulation (15 CFR 700).

(Applicable to all rated orders)

252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)

(IAW DFARS 211.274-6(a)(1), DFARS 212.301(f)(xii))

(a) Definitions. As used in this clause—

“DoD recognized unique identification equivalent” means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid/equivalents.html .

“Unique item identifier type” means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html .

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government’s unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number

Item Description

See Schedule as Applicable

(ii) Items for which the Government’s unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number

Item Description

*Items less than $5000, which require UID, will be specifically identified in the schedule.

See Schedule as Applicable

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number _____( or See Schedule as Applicable).

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number _____( or See Schedule as Applicable).

(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or (iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232‐7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/ .

(2) Embedded items shall be reported by one of the following methods—

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number ______, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(Applicable when delivery of one or more “items” as defined at 252.211‐7003(c) is required)

252.211-7007 REPORTING OF GOVERNMENT-FURNISHED PROPERTY (AUG 2012)

(IAW DFARS 211.274-6(b), DFARS 212.301(f)(iv))

(Applicable when FAR 52.245‐1, Government Property, is used)

52.215-2 AUDIT AND RECORDS--NEGOTIATION (JUN 2020)

(IAW FAR 15.209(b)(1))

(Applicable if negotiated and above the simplified acquisition threshold, except commercial items and utility services at public prices plus reasonable connection charge)

52.215-8 ORDER OF PRECEDENCE--UNIFORM CONTRACT FORMAT (OCT 1997)

(IAW FAR 15.209(h), AFFARS 53.15.209(h))

(Applicable when using uniform contract format that is not commercial or for construction)

52.215-23 LIMITATIONS ON PASS-THROUGH CHARGES (JUN 2020)

(IAW FAR 15.408(n)(2))

(Applicable to orders issued hereunder)

52.216-18 ORDERING (AUG 2020)

(IAW FAR 16.506(a))

(a) Such orders may be issued from .

(Applicable to all orders issued hereunder)

52.216-19 ORDER LIMITATIONS (OCT 1995)

(IAW FAR 16.506(b))

(a)Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than quantity of 5, the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.

(b)Maximum order. The Contractor is not obligated to honor‐‐

(1) Any order for a single item in excess of quantity of 47;

(2) Any order for a combination of items in excess of quantity of 47; or

(3) A series of orders from the same ordering office within 30 days that together call for quantities exceeding the limitation in subparagraph (b)(1) or (2) of this section.

(c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216‐21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum‐order limitations in paragraph (b) of this section.

(d) Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within 7 days after issuance, with written notice stating the Contractor's intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source.

(Applicable to all orders issued hereunder)

52.216-22 INDEFINITE QUANTITY (OCT 1995)

(IAW FAR 16.506(e))

(d) Contractor shall not be required to make any deliveries under this contract after .

(Applicable to all orders issued hereunder)

52.217-2 CANCELLATION UNDER MULTIYEAR CONTRACTS (OCT 1997)

(IAW FAR 17.109(a))

(Applicable to all orders issued hereunder)

52.217-8 OPTION TO EXTEND SERVICES (NOV 1999)

(IAW FAR 17.208(f))

The Contracting Officer may exercise the option by written notice to the Contractor within 30 days .

(Applicable to all orders issued hereunder)

52.217-9 OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000)

(IAW FAR 17.208(g))

(a) The Government may extend the term of this contract by written notice to the Contractor within 30 days ; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 60 days before the contract expires. The preliminary notice does not commit the Government to an extension.

(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.

(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed 10 years .

(The above Clause/Provision has been modified.)

(Applicable when the inclusion of an option is appropriate and it is necessary to include any or all of the following: 1. A requirement that the Government must give the contractor a preliminary written notice of its intent to extend the contract; 2.

A statement that an extension of the contract includes an extension of the option; 3. A specified limitation on the total duration of the contract.)

252.217-7001 SURGE OPTION (DEC 2018)

(IAW DFARS 217.208-70(b))

(a) General. The Government has the option to‐‐

(1) Increase the quantity of supplies or services called for under this contract by no more than percent;

252.217-7028 OVER AND ABOVE WORK (DEC 1991)

(IAW DFARS 217.7702)

(Applicable when containing requirements for over and above work, except as provided for in Subpart 217.71)

52.219-8 UTILIZATION OF SMALL BUSINESS CONCERNS (OCT 2018)

(IAW FAR 19.708(a))

(Applicable when exceeding the simplified acquisition threshold, except for personal service contracts or when performance is entirely outside of the United States and its outlying areas)

52.219-9 SMALL BUSINESS SUBCONTRACTING PLAN (DEVIATION 2018-O0018) (AUG 2018)

(IAW DARS TRCKING # 2018-O0018)

(Applicable over $700,000)

52.219-16 LIQUIDATED DAMAGES--SUBCONTRACTING PLAN (JAN 1999)

(IAW FAR 19.708(b)(2))

(Applicable when FAR 52.219‐9, Small Business Subcontracting Plan, or its Alternate I or Alternate II applies. IAW DFARS 219.708(b)(2), does not apply to DoD in contracts with contractors that have comprehensive subcontracting plans approved under the test program described in DFARS 219.702)

52.219-28 POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (NOV 2020)

(IAW FAR 19.309(c))

(h) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this…