FCI Herlong SOW.docx

DOCX document 27 KB Posted

Attached to
FCI Herlong CDL Driving Class
Solicitation number
15B61924Q00000004
Issued by

About this file

This document contains a statement of work and related federal contract opportunity notice. The statement of work is for a commercial driver's license training program at the Federal Correctional Institution in Herlong, California. It describes requirements for providing approximately 160 hours of classroom and hands-on instruction by a post-secondary institution or vocational training provider, leading to eligibility to obtain a commercial driver's license. The related contract opportunity is a total small business set-aside for commercial driver's license driving classes at the same facility. The solicitation number provided is 15B61924Q00000004 and will be available on SAM.gov as of March 4, 2024, with proposals due by April 8, 2024. The award will be made based on pricing and past performance related to on-time delivery and quality of service.

View the file

Other files

File Type Posted
15B61924Q00000004.pdf PDF
Cover Letter.docx DOCX document
Synopsis.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Subject

Federal Correctional Institution (FCI) Herlong intends to make a single award to a post-secondary institution, vocational training or industry-based school that will be responsible for providing instruction as described in this Statement of Work for a Commercial Driver’s License (CDL) training program for eligible Federal Prison Camp (FPC) Herlong inmates. Successful completion of the CDL training program must prepare inmates for and offer an opportunity to take the Commercial Driver’s License on-road test prior to release. Contractor fees will be charged on a per-student basis.

Place of Performance

Occupational training instruction will be performed at Federal Prison Camp Herlong, located at 741-925 Herlong Access Road A-25, Herlong, California, 96113.

Schedule

FCI Herlong Commercial Driver’s License Training Program Statement of Work (AOE Funded Occupational Education Programs)

A session is defined as one day of training, consisting of as much instructional time as possible, up to eight (8) hours. The contractor will normally provide sessions five (5) days a week, Monday – Friday, excluding Federal Holidays. Work hours will normally be between 6:00 AM and 2:00 PM, with a 30-minute unpaid lunch break. These hours may be adjusted to meet the needs of the institution. The contractor shall not normally exceed 30 hours per week.

A class is defined as a group of inmate students receiving training from the contractor, lasting from the initial session until the student’s CDL on-road test at a Department of Motor Vehicles (DMV). Fees charged by the contractor will be on a per-inmate student basis, rather than an hourly basis. The number of inmates participating in each class will typically be four (4) but may be more or less depending on final contract and availability of funds. Each class will receive forty (40) hours of Entry-Level Driver Training (ELDT) as mandated by the Federal Motor Carrier Safety Administration (FMCSA), and sufficient hours to practice pre-trip inspections, on-road training and skills training, typically around one-hundred-twenty (120) hours, for a total of approximately one-hundred-sixty (160) hours of training. Inmates participating in the program may require more or less total training time in order to achieve proficiency. Start dates for each class will be mutually agreed upon by the facility and contractor prior to the start of each class; however, all classes should be completed by the end of the current fiscal year.

The schedule of trips to the DMV for testing purposes will be based on DMV availability, but should be made as soon as is practicable, in anticipation of a class completing 160 training hours.

Due to the nature of the correctional setting, delays in performance of work may be experienced. Such delays may include but are not limited to inclement weather, electrical or mechanical problems, or other security matters. Contract employees who report to the institution but are unable to perform services due to such delays will be released for the day. In the event of any delay that occurs during a session, if the session is unable to resume later in the day, any remaining time for that session will be suspended and the contractor will be free to leave. If a delay happens prior to the start of a session, the institution will make every effort to notify the contractor as soon as is practicable, security allowing. In the event of any absence, the contractor may make up his/her time so long as it does not exceed 30 hours in any given week. If the contractor fails to provide coverage, the Government may seek contractual remedy.

Education and Qualifications

The contractor shall not be a self-employed individual or individual employed by a post-secondary institution. The contract must be between FCI Herlong and a post-secondary institution, vocational training school or industry-based school.

The occupational education program must fall under the contracted provider’s umbrella of accreditation. Industry-accepted certification is also acceptable. In this case, contracted providers must be listed as an approved training provider on the FMCSA’s Training Provider Registry (https://tpr.fmcsa.dot.gov/). If required for employment, certification tests from outside organizations may be administered to individual inmates upon completion of a specific occupational education program. However, the individual skill competency certification will not replace the training program’s overall accreditation or certification. Copies of documentation that demonstrate current licenses and/or accreditation will be requested periodically by the facility and kept for program records purposes.

The occupational education program must lead to a college certificate, A.A., A. S., A.A.S. or industry-recognized certificate qualifying inmates for at least an entry-level position of employment.

Supplies and Equipment

The contractor will provide the following supplies, equipment, and curriculum materials:

· Tractor-trailer truck to use during class sessions, on-road training and CDL testing at a DMV location. The tractor-trailer truck will be maintained and fueled by the contractor.

· Written and/or electronic materials pertaining to the FMCSA-mandated ELDT.

· Written and/or electronic materials pertaining to the written and on-road CDL tests.

· Any other supplies, equipment and curriculum deemed necessary to the completion of class by the contractor.

The contractor will make recommendations to the Supervisor of Education pertaining to the selection and purchase of additional supplies and equipment.

The institution will provide the following supplies, equipment, and curriculum materials:

· Typical classroom supplies such as pencils, papers, folders, etc.

Description of Duties

The contractor will provide instruction for FPD Herlong’s CDL training program in accordance with Bureau of Prisons Program Statement 5353.01, Occupational Education Programs, and Bureau of Prisons Program Statement 5300.21, Education, Training and Leisure Time Program Standards. As outlined in the schedule, each class will consist of several inmates, typically four (4), with daily sessions between the hours of 6:00 AM and 2:00 PM, for a total of approximately one-hundred-sixty (160) training hours.

The contractor will be required to pay for Department of Transportation (DOT) physical screenings for inmate students, to include a drug screening and urinalysis test.

The contractor will be required to accompany inmate students to their respective state-approved testing location, as well as provide inmates with the equipment necessary to take the certification test, including but not limited to tractor-trailer trucks, as outlined in the Supplies and Equipment section of this Statement of Work.

Twenty to forty percent (20-40%) of the curriculum’s competencies must be hands-on replication of the actual work environment. Application of hands-on work must be occupational in nature. An institution live work project may be utilized to demonstrate or apply hands-on competencies. Electronic or computer-based simulation does not satisfy the hands-on or live work requirement. The Supervisor of Education must approve live work projects.

Marketable programs shall afford inmates the opportunity to gain in demand skills in a specific occupation, industry, or trade. The marketable program must qualify inmate graduates for at least an entry-level position in [name of occupation]. As a precondition of the proposal for the contract, the contractor shall specify in writing to the Supervisor of Education the position(s) of employment for which inmate graduates will be eligible to apply. The Supervisor of Education shall determine the minimum and maximum number of enrollments. Instructors placed on site by the contractor are responsible for the maintenance of transcripts, student attendance records, statistics, and certification records.

The contractor will provide a written curriculum which establishes measurable behavioral objectives and procedures. The curriculum must include clear criteria which establish minimum expectations for program completion, provisions for the assessment of student progress, must identify the hands-on competencies and must require the students to demonstrate them.

The contractor shall assist in the recruitment of employers affiliated with the identified occupation to participate in the institution’s mock job fair.

Attire

The contractor is expected to wear professional clothing while on duty. The attire worn shall also be appropriate for the correctional environment in which the contract employee will be performing.

Inmate Management

Provision of services will require frequent and unsupervised contact with inmates. The contract employee shall not be responsible for the management of any inmates, other than to ensure inmates involved within the contract’s scope of work abide by all rules to ensure their safety and well-being. The successful contractor shall attend the Institution Familiarization Orientation program prior to assuming institution involvement. The contractor may, at any time, be removed from the institution at the discretion of the CEO. The contractor is to constantly be aware of security and maintain a professional relationship with inmates at all times. Any violation of the institution rules and regulations are to be brought immediately to the attention of any Government employee employed at the institution. The contractor will be required to provide documentation to the COR, or designee, of any infractions of institutional rules and regulations by inmates for proper action.

Institution Security

The contractor/contract employees shall agree to all regulations prescribed by the institution for the safety, custody, and conduct of inmates. The contract employee will be required to operate a system of records as identified for medical treatment documentation, and will require adherence to the Privacy Act of 1974. The contract employee will be required to sign in and out of the institution for accountability purposes. A badge will be issued and worn at all times for proper identification.

Non-Personal Services/Common Law Employee Information

The service is a contractual arrangement and not a personnel appointment. Payment is based on the provision of an end product or the accomplishment of a specific result, in this case on a per-inmate student enrolled in a class for the CDL training program basis. The service does not constitute an employer/employee relationship. The contractor will not be subject to Government supervision, except for security related matters. However, contractor performance shall be monitored.

If the resulting contract is made to an individual(s), the provision of these services has been determined to meet certain criteria for creating common law employee relationship. Therefore, the BOP is responsible for the payment of FICA taxes (7.65%) and the withholding of the individual’s taxes. These responsibilities apply only when award of this solicitation is made to an individual. It does not apply to companies or individuals who are incorporated. For evaluation purposes, an additional 7.65% will be added to the price submitted by individuals who are not incorporated.

File details come from the government source that posted it. Updated .