Schedule A.pdf

Schedule A

The following is a breakdown of requirements for CLIN 0001 Fire Coats:

- The ESEMBLE will meet the Most Current version of NFPA 1971

- Each firefighter will be measured for coat and pants

--(Person will be provided by contractor to do onsite measuring)

COAT

- OFFUTT FIRE in reflective 3” lettering centered between the shoulder blades.

- Last name in reflective 3” letters at the bottom of the coat, names must be visible while wearing SCBA.

--In cases of firefighters with the same last name their first initial will precede their last name.

--(Names will be provided upon request for the purpose of pricing)

- American Flag 2X3 inches reverse sided affixed to the right shoulder

- A 911 commemorative patch be affixed to the Left sleeve.

- Coat will be constructed of a blend of 40% PBI and 60% Kevlar

- An inner pocket will be stitched to the thermal liner with similar materials.

- The collar will be contoured

- Semi-Bellows pockets with hand warmers will be on the left and right sides.

- Each elbow will have a single layer of additional protection affixed to the outer shell and will be contoured to the shape of the elbow when bent.

- Coat will be pleated vertically from the shoulder blades to allow for better range of motion.

- A radio microphone clip will be affixed to the left and right sides of the chest

- Radio pocket on the left side of the chest

- Flashlight hook and Velcro strap on the right side of the chest

- Coat will overlap the pants when worn. NO SHORT COATS to prevent exposing undergarments when bending or stretching overhead.

- Wristlet will have a small thumb tab for ease of wear of gloves.

- Wrist cuff will be angled and long enough to cover gloves.