FAQS.docx

DOCX document 13 KB Posted

Attached to
Fiber Optic Cables S100-F/O-30
Solicitation number
1305M224Q0196
Issued by

About this file

This document is a set of Frequently Asked Questions (FAQs) related to a federal solicitation for fiber optic cables. The solicitation number is 1305M224Q0196 and the product is called "Fiber Optic Cables S100-F/O-30". The solicitation has been updated to extend the proposal due date to July 30, 2024 at 5:00 PM EST and to incorporate responses to Requests for Information (RFIs) submitted by potential offerors. The FAQs provide details on the required connector type, optical cable type, product length and tolerances, breakout cable length and tolerance, heat shrink tube requirements, and label content. The total quantity required is 325. This solicitation is being issued by the Department of Commerce's National Oceanic and Atmospheric Administration (NOAA).

View the file

Other files

File Type Posted
Instructions to vendors for marking shipments to NLSC.pdf PDF
1305M224Q0196.pdf PDF
PL-62828-42100-30 REV A.pdf PDF
Drawing.pdf PDF
1305M224Q0196_00001.pdf PDF
SPECIFICATIONS.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

FAQS: 1305M224Q0196

Q. Drawing 62828-42100 says to see separate Parts List PL62828-42100-10 THRU -110, -180, -240 and -300. Are you able to provide us with a copy of this Parts List?

A. The different drawings just reflect the different lengths. 10’ through 300’. The connectors are the same for all drawings.

Q. Please confirm the connector type and the optical cable type.

A. Connector and cable type of parts 1 and 2 in the parts list. They are by AMP, INC and their manufacturer part numbers are in the parts list.

Q. Please confirm the product length and tolerance.

A. Product length is 30' the tolerances mean that it has to be at least 30' but can be up to 10" longer than 30'.

Q. Please confirm the product breakout cable length and tolerance.

A. The product breakout length is 8.00 +/- 2.00 inches. At the bottom of the drawing it states " Unless Otherwise Specified Dimensions are in Inches."

Q. Please confirm the heat shrink tube length at the connector and heat shrink length.

A. Note 3 calls out mil spec MIL-I-23053/5 and states to " Select appropriate size sleeving for cable at marker B and C.

Q. Please confirm the line label content.

A. There are 3 labels with 2 locations each. For Marker B it should just read "TX" and for Marker C it should just read "RX". For Marker A it should read "62828-42100-30".

Q. What is the Quantity?

A. Quantity is 325.

File details come from the government source that posted it. Updated .