ANSWERS TO QUESTIONS.docx

GUN Locker Questions / Answers in Red

1. What is the installation timeline?

This should be determined by vendor to install 280 lockers with cabinets for storage.

2. Will the outside of lockers need to be painted?

Yes outside lockers should be painted.

3. What is the depth of the lockers?

The depth of the lockers is 6-1/2 inches from off the wall.

4. Will the inside of the lockers need to be painted?

Yes the inside of the lockers should be painted to match the outside lockers.

5. Will the doors come assembled into pieces or separately?

Doors should come assembled on pistol lockers.

6. Are the locker boxes individual or grouped together?

Locker boxes should be grouped together.

7. Is installation required?

Yes installation will be required.

8. Is this to be installed on the first floor?

Yes the installation will be on the first floor.

9. Do you have a loading dock onsite?

Yes the building does have a loading dock. The loading dock is very close to the work site and on the same level as the first floor.

10. Clear access in the room?

Yes, however contractors will need to go through a background check at the officer screening facility.

11. What are the business hours available for the install?

Business hours can be 0700 to 1500. Or 7an to 3pm.

12. What type of closure is desired – stand padlock clasp, electronic/digital keypad, programmable/touchless, etc.?

For the 220 lockers for the in service staff – Key Locks that are not alike.

For the 60 lockers for out of service staff – programmable lock with master override key.

13. Is the locker depth 6-1/2 and if not what is the desired depth?

Yes that is the correct depth of the locker.

14. Do you require engraved numbers or number plates?

We require number plates for the lockers.

15. Is the bathroom horizontal 4-1/4 off the floor or open shelf?

Filler base at bottom of open shelf should be 4-1/4 inches off of the floor.

16. Is Dust sloping hood/top desired instead flap top to reduce dust and debris on top?

Slope Hood/top is preferred.

17. Filler bases at the bottom eliminate the need to clean and sweep up dust or debris underneath the lockers. Should we include bases to defend the accumulation of debris under the lockers?

Please include filler bases at bottom of lockers.

18. Does the scope require removal of old lockers? If so, how many lockers will need to be removed.

Yes old locker will need to be removed. Do not have exact quantity of old lockers to be removed.

19. Does the scope require hauling/disposal of old lockers?

Old lockers will not be disposed of. Another vendor will handle that.

20. What are the size specifications of the current lockers?

25" Wide x 6-1/2" Deep x 20-1/8" High

21. What are the size specifications of the new lockers?

25" Wide x 6-1/2" Deep x 20-1/8" High.

Lockers should also include storage shelves/ cabinets at bottom of lockers.

22. Does the scope include installation or just purchase and delivery?

The scope should include install and delivery.