RFI Attachment 2.doc

DOC document 52 KB Posted

Attached to
FAA Simulation Certification Course Instructor
Solicitation number
Not on record
Issued by

About this file

Performance Work Statement (PWS)

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

RFI Attachment 2

FOR

FEDERAL AVIATION ADMINISTRATION (FAA) FLIGHT SIMULATOR EVALUATOR COURSE

(FLIGHT SIMULATION TRAINING DEVICE EVALUATOR COURSE FOR ALL AIR MOBILITY COMMAND (AMC) AIRCRAFT) 04 Sep 12

1.0 DESCRIPTION OF SERVICES. The contractor shall provide academic instruction for United States Air Force (USAF) pilots, flight engineers and Department of Defense (DoD) civilians in performance of their duties as USAF flight simulator evaluators. Instruction includes techniques, procedures, policies, and criteria for evaluating, qualifying and approving flight training devices for aircrew operation. Training shall be conducted at Altus AFB OK, Travis AFB CA, Little Rock AFB AR, or Lackland-Kelly AFB TX. Individual students are responsible for all Air Force and Federal Aviation Administration (FAA) prerequisites.

1.1 FLIGHT SIMULATOR EVALUATION TRAINING. Five days of training shall be conducted at one of the above listed AF approved training locations in an AMC full flight simulator certified annually under the provisions of AFI 36-2251. The contractor shall have experience as a qualified FAA SIMCERT instructor. The training class will normally consist of two (2) pilots, two (2) flight engineers and two (2) civilians per class. Other crew positions such as navigators and aeromedical evacuation (AE) personnel may be included in each class as approved by AMC/A3TR at no additional cost. Contractor shall conduct at least one (1) but not more than three (3) classes per contract year. The contractor shall make available to the students at the beginning of each class, a syllabus in contractor format identifying the curriculum and plan that will be used to enable the students to conduct a simulator evaluation. The course syllabus will be reviewed and approved by the AMC/A3TR COR upon initial use and when modified by the contractor. Other than the copies identified as Government Furnished in paragraph 3, the contractor shall make available other handouts he/she deems appropriate for training purposes. All copies of handouts will be made by the government unit (AMC Detachment) at the site hosting the training class.

1.2 SIMULATOR TIME. All training shall be conducted in an AMC simulator certified annually under the provisions of AFI 36-2251, at one of the approved Air Force training locations as listed in paragraph 1.0. The Government will provide a fully operational simulator and a fully qualified simulator operator.

1.3 STUDENT ADMINISTRATION.

1.3.1 On the first day of class, the contractor shall obtain a copy of military orders directing the student attend the class. In the event that students do not have military orders and no official travel was required or requested, for any other approved reason, the contractor will obtain verification that the student is to enter the class. The Government reserves the right to substitute crewmembers or civilians at its discretion.

1.3.2 AF Form AF IMT1522. In addition, with the invoice, the contractor shall record each student’s name, signature, SSN, unit, event description, and date on an AF Form 1522, AFORMS, Arms Additional Training Accomplishment Report, (Attachment 1) in accordance with the General Instructions on the second page of the form and send a copy of the form annotated with the class start date, graduation date, and course number with 7 days of class completion to :

AMC/A3TR

402 Scott Drive, Unit 3A1

Scott AFB, IL 62225-5302

1.3.3 TRAINING CERTIFICATE. A Certificate of Training in contractor format shall be provided to students upon course completion.

1.3.4 AMC FORM 246 STUDENT COURSE CRITIQUES. Upon completion of training, the contractor shall provide each student with a copy of AMC Form 246, Student Course Critique (Attachment 2). Within 7 days of course completion, the contractor shall send a completed copy of each course critique with the invoice to:

AMC/A3TR

402 Scott Drive, Unit 3A1

Scott AFB, IL 62225-5302

2.0 SERVICES SUMMARY

Performance Objective
PWS paragraph
Performance Threshold
Provide Flight Simulator Evaluator Training
1.1
Course content and presentation adequate 100% of the time to enable students to perform periodic Simulator Certifications
Course Syllabus
1.1
95% of the events in Course Syllabus shall be completed
Provide Course Critique
1.3.4
Course Critiques shall be delivered to the provided address 99% of the time

3. GOVERNMENT FURNISHED PROPERTY

3.1 DELIVERABLES:

Attachment No.
PUBLICATION
TITLE
No. COPIES
1
AF Form 1522
AFORMS Additional Training Accomplished Input
4 Hardcopies & 1 Electronic copy
2
AMC Form 246
Student Course Critique
4 Hardcopies & 1 Electronic copy

4.0 GENERAL INFORMATION

4.1 TRAINING TIMES. A training period is defined as the period of time when a student reports to the training facility to start a training session and lasts until the student leaves the facility at the end of the training session. The contractor shall define the length of training time adequate to accomplish training objectives as listed in Attachment 3. Class scheduled time will include time for breaks and lunch periods.

Upon completion of the course each student will be given a certificate of completion and will be qualified to perform a SIMCETR on AMC Aircrew Training Devices.

4.2 CLASS SCHEDULING. Scheduling shall be accomplished by the issuance of a task order by the CO in accordance with the Ordering clause.

4.3 STUDENT QUALIFICATION Unit Commanders shall recommend to AMC/A3TR in writing and certify at the time of scheduling that each student possesses the necessary qualifications to complete training. Subjective evaluations of students shall be provided by the contractor.

4.4 CANCELLATION NOTICE. The Government shall notify the contractor in writing of any class cancellation in accordance with the contractor’s cancellation policy. In the case of an emergency (i.e. death, injury, illness, mission essential task, or an emergency which requires the scheduled training to be cancelled in the best interest of the Government), the Government will not be liable for payment. If a class is cancelled and the instructor is in route or has arrived at the training facility, the Government will reimburse the contractor the travel costs incurred, the contractor will not be paid for a cancelled class.

4.5 TRAVEL. The contractor will be required to travel to the sites specified in paragraph 1.0 to conduct the required training. All travel costs will be in accordance with paragraph 4.7, Task Ordering Procedures, of this PWS.

4.6 BASE ACCESS. The contractor shall provide the following information to the host base point of contact, provided by the Contracting Officer Representative (COR).

Company Name:

Name of Individual Accessing Facility:

Date of Birth:

Place of Birth:

US Citizenship: (circle one) Yes No

4.7 TASK ORDERING PROCEDURES. Work efforts specifically designated as requirements specified in this PWS shall be authorized ONLY by the CO as a Task Order Requirement. The procedures for authorizing performance as well as establishing firm-fixed-prices for such efforts are specified below.

a. Prior to issuance of any order under this contract, the Government shall forward to the contractor a request for training and specify the location.

b. The contractor shall provide a copy of the course syllabus to the designated host unit Point of Contact (POC) prior to each class start date.

c. The contractor shall submit a travel itinerary and estimated costs to the COR and CO no later than ten (10) workdays prior to travel. The COR will validate the necessity for travel and the CO will confirm availability of funds and approve the travel. Reimbursement of expenses will be IAW with FAR 31.205-46. All non-local travel arrangements shall be the responsibility of the contractor including, but not limited to, airline, hotel and rental car. The contractor shall make all efforts to schedule travel far enough in advance to take advantage of reduced airfares. The contractor shall monitor all non-local expenditures and turn in travel vouchers no later than five days after completion of travel. The contractor shall not exceed the estimated amount included in the contract without prior authorization by the CO.

d. A firm fixed price Task Order shall be issued based on the established prices in associated CLINS and agreed to travel costs. The contractor shall not begin work until a task order has been issued by the CO.

e. Contractor will need to provide identification and the name and phone number of the host unit POC or AMC Detachment Commander to verify official status and/or provide escort on a USAF base.

5.0 GENERAL INFORMATION.

5.1 PERSONNEL RETENTION. The contractor shall make every effort to retain quality personnel in order to ensure continuity until contract completion. If it should become necessary to substitute or replace personnel, contractor shall provide evidence to the CO that potential replacement personnel possess the required qualifications set forth in contractor’s proposal and subsequent contract. Replacement personnel shall be of at least the same skill and knowledge as originally proposed. The Government has the right to refuse replacement personnel.

5.2 SECURITY. Training will occur at a Government location. The COR will coordinate with the Government organization on where training shall take place and provide the contractor the security requirements for conducting training at the respective location. This information shall be provided no later than 30 days prior to a scheduled training course to enable the contractor to meet all security requirements. A security clearance is not required for performance of this effort.

5.1 CLEARANCE. Work performed under this contract is conducted in a secure environment. The Government shall give contractor access to applicable Government facilities from the commencement of the training dates until training completion. Contractor shall comply with all appropriate provisions of applicable security regulations.

5.2 CONTRACTOR CONSENT TO BACKGROUND CHECKS. Contractor shall not employ persons to perform under this contract if such employee is deemed or identified by the approved Air Force training locations listed in paragraph 1.0 as a potential threat to the health, safety, security, general well-being or operational mission of the installation and its population, nor shall contractor or subcontractor employ persons under this contract who have an outstanding criminal warrant. Contractors must ensure their employees and those of their subcontracts have the proper credentials allowing them to work in the United States. Persons later found to be undocumented or illegal aliens will be remanded to the proper authorities. Contractor shall not be entitled to any compensation for delays or expenses associated with complying with these provisions. Furthermore, nothing shall excuse contractor from proceeding with the contract as required.

5.3 BADGES. The Government may provide each contractor identification badges. If issued, all contractor personnel must wear these badges while on duty on the Government site. Contractor’s identification badge will not be used as an entry requirement for installation entry or into any Government designated controlled or restricted area. Government provided badges will be surrendered upon termination of employment or the end of the contract performance period.

5.4 ACCESS TO INSTALLATION DURING FORCE PROTECTION CONDITIONS (FPCONS). Contractor will be assigned a mission essential designation IAW requirements contained in the Integrated Defense or AT Plan(s) for each individual location addressed in paragraph 1.0. Only the installation commander or the unit commander requesting contract support will assign the mission essential designation.

5.5 PROPERTY PROTECTION. Property protection for the facility where contractors’ primary work center is located will be the responsibility of the local facility manager and local Government Security Manager, or their duly authorized representative IAW AFI 31-101, Integrated Defense, and command/local directives. Contractor must safeguard all Government-owned equipment and materials in his/her possession or use.

5.6 SAFEGUARDING UNCLASSIFIED AND/OR FOR OFFICIAL USE ONLY (FOUO) INFORMATION. Contractor must meet Air Force standards for storing, processing, and handling unclassified and/or Sensitive but Unclassified (SBU) information and systems. Additionally, all resources (e.g. maps, publications/instructions, photos) provided by the Government to assist contractor in the performance of their contract will be surrendered upon termination of employment or the end of the contract performance period.

5.7 CONTRACTORS WORKING IN CONTROLLED OR RESTRICTED AREAS. In the unlikely event that a contractor requires access to a controlled or restricted area and does not have the proper security clearance, the Government will ensure escort(s) are provided for contractor at all times when within a controlled or restricted area. Contractors must fulfill, maintain, and comply with all security requirements IAW AFI 31-101, Integrated Defense, and command/local directives.

5.8 ACCESS TO GOVERNMENT FACILITIES WITH CONTROLLED OR RESTRICTED AREAS. Contractor must comply with security regulations imposed by the installation commander and/or the agency responsible for the project location. Due to specific mission requirements inherent in the nature of controlled or restricted areas for each individual location addressed in paragraph 1.0, the Government may direct contractor to leave the controlled or restricted areas at any given time. If this direction increases the cost of or the time required to complete the work, the contract price or schedule, or both must be adjusted accordingly.

5.9 NON-DISCLOSURE AGREEMENTS. All contractor personnel both on and off-site will be required to sign a non-disclosure agreement (See Appendix). The contractor shall submit to the COR and CO nondisclosure agreements for each employee before the employee begins work on this effort. The contractor shall submit nondisclosure agreements for replacement employees prior to the employee beginning work. Nondisclosure agreements will be maintained in the contract/COR file.

5.10 IDENTIFICATION OF NON-DISCLOSURE REQUIREMENTS. The contractor shall execute non-disclosure agreements when it works with sensitive or proprietary information provided from the Government, other contractors, and firms not having Government contracts, academic institutions, and other nonprofits. The contractor agrees to enter into company-to-company agreements to: (1) protect another company's information from unauthorized use or disclosure for as long as it is considered proprietary by the other company and (2) to refrain from using the information for any purpose other than that for which it was furnished. For informational purposes, the contractor shall furnish copies of these agreements to the COR. These agreements are not intended to protect information available to the Government or to the contractor from other sources and are furnished voluntarily without restriction. This restriction shall be included in all subcontracts, teaming arrangements, and other agreements calling for performance of work.

5.11 ANTITERRORISM TRAINING. Within 30 calendar days after contract start, all contractor personnel shall complete Antiterrorism Level I training, as required by DODI 2000.16. Newly hired personnel shall complete the Antiterrorism Level I Training within the first 30 calendar days of their employment. Refresher Antiterrorism Level I Training shall be completed and documented annually thereafter. The training is provide at https://atlevel1.dtic.mil/at/ and also available through Advanced Distributed Learning Services (ADLS), Force Protection Course (ZZ133079) at https://golearn.csd.disa.mil/kc/main/kc_frame.asp for AF Portal access or https://golearn.csd.disa.mil/kc/login/login.asp for non-portal login.

5.12 CONTRACTOR FURNISHED ITEMS AND SERVICES. Except for those items or services specifically stated in paragraph 3.0 and sub paragraphs as Government-furnished, the contractor shall furnish everything needed to perform this contract.

5.13 PERSONAL SERVICE. This contract is not being used to procure personal services defined by the Federal Acquisition Regulation (FAR) Part 37.104 titled ‘Personal services contract”.

5.14 SITE VISITS. The COR reserves the right to audit training at any time. Such visits shall not interfere with the contractor’s operations.

5.15 DATA RIGHTS. The Government will retain unlimited rights to all data and deliverables developed at Government expense for this contract.

5.16 SAFETY. The contractor shall comply with the latest applicable Federal, State, Air Force, AMC, and Installation, regulations, instructions, policies, management plans, and requirements regarding personnel health, occupational and operational safety, and airfield operations. The COR shall provide copies of publications not available on the web and updates as they become available.

ATTACHMENTS :

Attachment 1: AF Form 1522, ARMS Additional Training Accomplishment Report

Attachment 2: AMC Form 246 , Student Course Critique

Attachment 3: FAA Flight Simulator Evaluator Course Training Objectives

Attachment 4: Non-Disclosure Agreement for Contractor Employees Supporting AMC Contracts

File details come from the government source that posted it. Updated .