Polished_Concrete_PWS.pdf

What:

-Move Office Furniture in work center and break room into packing lanes prior to removal of carpet& CVT tile in work center and break room.

-Remove and dispose of carpet in the work center.

-Remove and dispose of CVT tile in the following areas: foyer, break room, restroom hallway.

- Resurface aforementioned areas with polished concrete and ensure proper leveling of concrete.

-Move Office Furniture from packing lanes back to office area and break room.

-Remove paint in packing lanes, parachute towers, and sewing room -Ensure proper leveling of concrete -Fill/fix current damage, breaks, chips and divots.

-Fix/correct current G-12 tension stake holes to 90 degrees and ensure solid placement -Paint marking lines for parachute packing reference points.

-Resurface aforementioned areas with polished concrete.

-Ensure finished areas are clean and ready for use.

-Provide maintenance supplies for upkeep of finished floors.

When: 4th Quarter FY 2018

Where:

Kirtland AFB, NM Building 994 58th OSS/OSD Aerial Delivery Rooms:

Work Center (Carpet) Break Room (CVT Tile) Restroom Hallway (CVT Tile) Packing Lanes (Painted Concrete) Sewing Room (Painted Concrete) Parachute Towers (Painted Concrete)

Polish Specs:

Color: Clear Finish: Satin Slip Resistance: ASTM 0.6-0.9 Anti-Static

PSI: Vendor stated that PSI rating does not apply for the polish applied to polished concrete and that it would be the same for every vendor. Vendor stated that they have a glass test but no discernable PSI rating for the polish. Vendor stated that this was not needed the last time polished concrete services were provide by their company for other facilities on Kirtland AFB.

MILSPEC/MILSTD: MIL-STD-810E, ASTM D 4300,

Work classification will be Laborer: Mason Tender- Cement/Concrete.