Attachment 2 - Articles.pdf
PDF 196 KB Posted
- Attached to
- Request for Oral Presentation (ROP) - Prototype Research, Integration, and Systems Modernization (PRISM)
- Solicitation number
- FA910127PRISM
About this file
This document is a master Other Transaction (OT) Base Agreement establishing terms and conditions for the Prototype Research, Integration, and Systems Modernization (PRISM) program executed under 10 U.S.C. § 4022. The agreement is a 10-year non-exclusive research and prototyping vehicle with a $0.00 base obligation and an estimated programmatic ceiling of less than $50,000,000 across all Project-Level Agreements (PLAs). Work shall be executed exclusively through individual bilaterally negotiated PLAs, each incorporating its own Statement of Work, deliverables, acceptance criteria, and firm-fixed-price milestone payment schedules. The performer (New Mexico State University) must maintain CMMC Level 2 Self-Assessment certification by November 10, 2026, and thereafter maintain current compliance; failure constitutes grounds for immediate termination for default. Payments are milestone-based only upon formal Government written acceptance, with invoicing through Wide Area Workflow (WAWF) using specified DoDAACs (Issue By: FA9101; Admin: FA9101; Pay Official and Inspect By: TBD). The Government reserves sole discretion to award PLAs, conduct competing procurements, or extend/reduce the 10-year duration.
The agreement imposes comprehensive cybersecurity requirements including NIST SP 800-171 implementation, 72-hour cyber incident reporting to DIBNet, and media preservation for 90 days. Title to deliverables passes to Government upon formal written acceptance; risk of loss remains with performer until acceptance. The performer must comply with Defense Priorities and Allocation System (DPAS) with DO-C9 rating, maintain active SAM registration, obtain Joint Certification Program (JCP) certification if handling export-controlled data, and flow down all security and compliance requirements to subcontractors. The agreement expressly disclaims all warranties except a limited express warranty for TBD period from acceptance, caps direct damages liability at total agreement price (excluding IP indemnification and willful misconduct), and excludes consequential damages. All deliverables must be delivered to 704th Test Group (704TG), Holloman Air Force Base, New Mexico. The Government reserves the right to suspend performance for security breaches, unauthorized foreign access, certification lapses, or safety hazards, with no cost adjustments for performer-caused suspensions.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 1 - Statement of Objectives.pdf | ||
| Request for Oral Presentation - PRISM .pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Prototype Research, Integration, and Systems Modernization (PRISM) Articles
17 November 2026
Article Definitions As used throughout this Agreement, the following terms shall have the meanings set forth below:
Acceptance: The Government’s formal, written acknowledgement that a deliverable, technical milestone, or prototype meets the pre-established Acceptance Criteria set forth in the governing
PLA.
Acceptance Criteria: The specific, measurable, and testable requirements that a prototype, deliverable, or milestone must meet to be accepted by the Government, as detailed in an individual Project Level Agreement’s (PLA) Statement of Work.
Agreement: This Other Transaction (OT) Agreement, executed under the authority of 10 U.S.C. § 4022, comprising the Base Agreement terms and all subsequently issued PLAs.
Agreements Officer (AO): The Government official with the authority to enter into, administer, and modify this Other Transaction Agreement on behalf of the Government.
Base Agreement: This master umbrella document that establ8ishes the overarching terms, conditions, and procedures for the 10-year PRISM program.
Consequential Damages: Indirect, special, incidental, or punitive damages, including but not limited to, lost profits, loss of use, loss of revenue, or loss of data.
Contractor / Performer/ Vendor: The non-government party to this Agreement.
Controlled Unclassified Information (CUI): Information the Government creates or possesses, or that an entity creates or possesses for or on behalf of the Government, that a law, regulation, or Government-wide policy requires or permits an agency to handle using safeguarding or dissemination controls.
Cure Notice: A written notice from the non-breaching Party that details a material failure of performance and provides the breaching Party with a specified period to correct the failure.
Cyber Incident: An action taken through the use of computer networks that results in a compromise or an actual or potentially adverse effect on an information system or the Controlled Unclassified Information (CUI) residing therein.
Cybersecurity Maturity Model Certification (CMMC): The DoD’s framework for verifying that a Performer has implemented the required cybersecurity standards to protect CUI.
Direct Damages: The damages that arise naturally and foreseeably from a breach of this Agreement in the usual course of events. This does not include Consequential Damages as defined above.
Equitable Settlement: A negotiated amount intended to fairly compensate a Party for work performed and costs incurred, particularly in the event of a termination.
Excess Material: Unconsumed raw materials, electrical components, sensors, benchtop hardware, wiring, fasteners, enclosures, and spare parts procured by the Performer using funds obligated under any PLA that are not physically incorporated into delivered prototype assemblies.
Force Majeure: An event beyond the reasonable control of a Party and without their fault or negligence that delays or prevents performance of an obligation under this Agreement. Such events may include, but are not limited to, acts of God, acts of a public enemy, acts of the Government in its sovereign capacity, fires, floods, epidemics, quarantine restrictions, strikes, and freight embargoes.
Government-Furnished Property (GFP): Property in the possession of, or directly acquired by, the Government and subsequently furnished to the Performer for the performance of this Agreement.
Government Purpose Rights: The right for the Government to use, modify, reproduce, and disclose technical data or computer software within the Government without restriction; and to release or disclose it outside the Government and permit its use for U.S. Government purposes only.
Latent Defect: A hidden defect in a delivered item that existed at the time of acceptance but was not discoverable through a reasonable inspection or the execution of the Acceptance Criteria.
Limited Rights (for Technical Data): The right for the Government to use, modify, and reproduce technical data within the Government only. The Government may not disclose the data outside the Government or use it for manufacturing without the Performer’s express written permission.
Milestone: A specific, demonstrable event or accomplishment defined in a PLA that, upon successful completion and acceptance, triggers a payment to the Performer.
Milestone and Payment Schedule: The structure to this Agreement that details all payable milestones, the specific completion criteria for each, and the corresponding payment amounts.
Modification: A formal, written change to this Agreement that is signed by the authorized representatives of both Parties.
Party / Parties: The Government and the Performer, individually or collectively.
Project level Agreement (PLA): A bilaterally executed order issues under the authority of this Base
Agreement that details the scope, technical requirements, schedule and payable milestones for a specific prototype project.
Restricted Rights (for Computer Software): The right for the Government to use computer software within the Government only. The Government may not decompile, reverse engineer, or disclose the software outside the Government without the Performer’s express written permission.
Statement of Objectives (SOO) / Statement of Work (SOW): The attachment to a PLA that describes the scope of work, tasks, and deliverables required of the Performer for that specific project.
Unlimited Rights: The right for the Government to use, modify, reproduce, disclose, perform, display, or release technical data or computer software in whole or in part, in any manner, and for any purpose whatsoever, and to have or authorize others to do so.
Article: Demonstration, Review, and Acceptance This Article defines the process by which all major prototype deliverables under this Agreement are demonstrated, reviewed, and formally accepted by the Government.
A. Basis for Acceptance Performance under each Project-Level Agreement (PLA) shall be evaluated and accepted on a milestone-by-milestone basis. Acceptance is governed exclusively by the objective, pre-negotiated Acceptance Criteria detailed in the individual PLA’s Statement of Work.
B. The Acceptance Process The process for each payable milestone shall proceed as follows:
1. Demonstration by Performer: The Performer shall notify the Agreements Officer (AO) and the designated Agreements Officer Representative (AOR) in writing when a milestone has been completed. This notification shall be accompanied by the submission of all associated technical data, reports, software, or notice that a physical demonstration is ready for Government review.
2. Government Verification: The Government shall have [TBD, e.g., 15] business days from the date of submission or demonstration to review the deliverable against the specific Acceptance Criteria for that milestone as defined in the PLA.
3. Formal Acceptance: Acceptance of a milestone shall occur only upon the Government’s issuance of a formal, written notice of acceptance to the Performer. This written acceptance is the sole document authorizing the Performer to submit an invoice for the corresponding milestone payment.
C. Technical Deficiency and Collaborative Resolution
Should any submitted deliverable fail to meet the milestone’s Acceptance Criteria, the AOR shall provide a written notice detailing the specific deficiencies. The Parties agree to collaboratively resolve all technical deficiencies in good faith. The Performer shall correct all identified deficiencies at no additional cost to the Government and shall re-submit the deliverable for verification. If the Parties mutually agree in writing that a prototype with minor, non-critical deficiencies provides value to the Government, they may negotiate an equitable adjustment to the milestone payment.
D. Latent Defects The Performer is responsible for the quality and workmanship of delivered physical prototypes. A latent defect is a hidden flaw that existed at the time of acceptance but was not discoverable through reasonable inspection, which causes the prototype to fail to meet its performance requirements after delivery. The Performer shall be responsible for correcting such defects at its own expense, provided the Government provides notice within [TBD, e.g., 12] months of final prototype acceptance.
Article: Assignment of Payments The Performer may assign its rights to receive payments due under any PLA to a bank, trust company, or other financing institution. Any such assignment must be made in writing and provided to the Agreements Officer and the designated payment office.
However, the Performer may not assign its rights to receive payment if such payment is made directly by a third party.
Article: Agreement Modifications A. Mutual Agreement for Changes Either Party may propose modifications to the terms of this Base Agreement or any individual Project Level Agreement (PLA). Substantive modifications, including changes to the Statement Objectives (SOO/SOW), milestone schedules, deliverable acceptance criteria, funding ceilings, or Period of Performance (PoP), shall be subject to good-faith negotiation and require bilateral execution.
B. Formalization of Changes
1. Master Base Agreement Modifications: No change to the core terms, conditions, or master ceiling of this Base Agreement shall be effective until captured in a formal, written modification signed by the Agreements Officer (AO) and the Performer’s authorized university signatory.
2. Project Level Agreement (PLA) Modifications: Modifications to individual PLAs (such as adjusting technical milestone targets or reallocating funds between project phases) shall be formalized via written PLA modifications executed bilaterally by the AO and the Performer’s Principal Investigator or designated official.
C. Administrative Changes Purely administrative changes, such as updating points of contact or correcting accounting information, funding negotiated line items, and exercising negotiated line items, may be made unilaterally by the Government’s Agreements Officer via written notice to the Performer.
Article: Collaborative Dispute Resolution A. Guiding Principles The Parties shall engage in timely, cooperative, and good-faith communication to resolve any dispute, claim, or disagreement arising from or related to this Agreement. All disputes, including but not limited to allegations of breach, shall be first resolved exclusively under the procedures set forth in this Article.
B. Resolution Process
1. Project Manager Resolution: When a dispute arises, the Project Managers of both Parties shall make reasonable efforts to resolve the issue through informal discussions at the earliest opportunity.
2. Senior-Level Escalation: If the Project Managers cannot reach a mutually agreed solution within fifteen (15) business days, the matter shall be considered a conflict and escalated to the Government's Agreements Officer and legal counsel, and the Performer's designated senior executive leadership and legal counsel.
3. Formal Notice and Response: If the conflict remains unresolved after escalation, the aggrieved Party shall formally document the dispute in writing to the other Party. The receiving Party shall provide a detailed written response outlining its position and proposed resolution within thirty (30) business days.
4. Seeking Further Relief: Only after the escalation procedures have been fully exhausted may an aggrieved Party pursue litigation. Any litigation arising under this Agreement must be brought exclusively in a United States Federal Court of competent jurisdiction. The Contract Disputes Act (CDA) shall not apply to this Other Transaction Agreement.
C. Alternative Dispute Resolution (ADR) At any stage of the dispute, the Parties may mutually agree in writing to utilize non-binding ADR procedures (such as mediation or arbitration) to facilitate resolution. Unless otherwise agreed, the costs of any neutral mediator or arbitrator shall be shared equally by both Parties.
Article: Excusable Delays A. Definition Neither the Government nor the Performer shall be considered in breach or default of this Agreement or any associated PLA for a failure or delay in performance caused by an event beyond their reasonable control and without their fault or negligence. Such events, often referred to as Force Majeure, may include, but are not limited to: acts of God, acts of a public enemy, acts of the Government in its sovereign capacity, fires, floods, epidemics, quarantine restrictions, strikes, freight embargoes, or unusually severe weather.
B. Notification and Mitigation The Party affected by such an event shall provide prompt written notice to the other Party, describing the event, its cause, and its anticipated impact on performance. The affected Party shall also make all reasonable efforts to mitigate the effects of the event and minimize any delay.
C. Agreement Adjustment Upon receipt of the notice, the Parties shall promptly consult to determine the appropriate path forward. If the event results in a material impact on the Agreement’s cost or schedule, the Parties shall negotiate an equitable adjustment to the relevant terms of the Agreement, to be captured in a formal modification.
1. Schedule Relief: The Performer shall be granted a day-for-day extension (or other mutually agreed-upon schedule adjustment) to the affected milestone delivery dates, to be captured in a formal bilateral PLA modification.
2. Financial Adjustments: Excusable delays provide schedule relief only. Because this Agreement utilizes a firm-fixed-price milestone structure, an excusable delay does not automatically entitle the Performer to additional funding or milestone price increases. Any financial adjustments to a PLA’s funded ceiling must be negotiated and executed via a bilateral modification signed by the Agreements Officer.
Article: Intellectual Property Indemnification A. Indemnification The Performer shall defend and indemnify the Government and its officers, employees, and agents against liability, including costs, for any claim of patent, trademark, or copyright infringement arising from the prototype or services delivered under this Agreement (the “Claim”).
B. Exceptions to Indemnification This indemnification shall not apply to any Claim to the extent it arises from:
1. The Performer’s compliance with specific, detailed written specifications or design direction provided by the Government;
2. The use of Government-Furnished Information, software, or property; or
3. A modification to the prototype or service made by the Government without the Performer’s consent.
C. Procedure In the event of a Claim:
1. The Government shall provide prompt written notice of the Claim to the Performer.
2. Once the Performer has indemnified the Government, the Performer shall have the right to control the defense and settlement of the Claim.
3. The Government shall provide reasonable information and assistance to the Performer, at the
Performer’s expense, in the defense of the Claim.
4. The Performer shall not agree to any settlement that imposes a financial obligation or admits liability on the part of the Government without the Government’s prior written consent, which shall not be unreasonably withheld.
Article: Payment and Invoicing A. Payment Based on Milestones Payments shall be made exclusively upon the verified completion and formal Government acceptance of discrete technical milestones detailed in the Milestone and Payment Schedule of each bilaterally executed PLA. Partial payments or pro-rata billing for partially completed milestones are not authorized, unless specifically negotiated and defined as an interim milestone within a PLA.
B. Invoicing Upon the acceptance of a payable milestone, the Performer shall submit a proper invoice in accordance with the “Invoicing” article of this Agreement. A proper invoice must include, at a minimum, the Agreement number, a description of the completed milestone, and the corresponding payment amount.
C. Payment Terms The Government shall make payment within thirty (30) days of receiving a proper and accurate invoice.
D. Overpayments and Other Debts
1. Overpayments: If the Government has made an overpayment or duplicate payment, the Performer shall promptly remit the excess amount to the payment office cited in this Agreement. The remittance shall include a description of the overpayment, the Agreement number, and the affected milestone.
2. Other Debts: Any amount payable from the Performer to the Government shall be considered a debt. The Parties shall first seek to resolve any debts by mutual agreement. If unresolved, amounts due to the Government may accrue interest in accordance with applicable U.S. Treasury regulations.
E. Final Payment The final payment under this Agreement shall be made after the successful completion, demonstration, and Government acceptance of all obligations set forth herein.
F. Invoicing The contractor shall submit invoices through Wide Area Workflow (WAWF), https://wawf.eb.mil/, and incorporate the data from the table below:
Invoice Type: Combo
Pay Official DoDAAC: TBD
Issue By DoDAAC: FA9101
Admin DoDAAC: FA9101
Inspect By DoDAAC: TBD
Ship To Code: TBD
WAWF POC: disa.global.servicedesk.mbx.eb
- ticket-requests@mail.mil
Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.
Article: Risk of Loss The Performer (NMSU) shall bear all risk of loss, theft, or damage to any physical prototype, subassembly, component, or associated technical data developed under an active PLA until they are formally accepted in writing by the Government, as defined in the Demonstration, Review, and Acceptance article.
The Performer is responsible for the safe transit, packaging, and delivery of all physical prototypes and materials to the designated delivery bays or test facilities specified in the individual PLA, primarily located at:
704th Test Group (704TG) Facilities, Holloman Air Force Base, New Mexico (NM).
Article: Taxes and Duties The Performer is responsible for identifying and paying all applicable Federal, State, and local taxes and duties associated with its performance under this Agreement or any individual PLA.
The mutually agreed-upon price of each payable technical milestone within an executed PLA is firm-fixed-price and all-inclusive of all applicable taxes and duties. The Government shall not be responsible for, nor shall any PLA milestone payment be adjusted to accommodate, any taxes, duties, or state GRT liabilities incurred by the Performer during project execution.
Article: Termination for Convenience A. Government’s Right to Terminate The Government may terminate this Agreement, or any individual PLA, in whole or in part, for its convenience by providing written notice to the Performer.
B. Performer’s Obligations Upon receipt of the termination notice, the Performer shall:
1. Immediately cease all work as directed in the notice.
2. Place no further subcontracts or orders for materials or services, except as necessary for completing the non-terminated portion of the Agreement.
3. Take all reasonable steps to minimize costs allocable to the work covered by the notice.
C. Settlement and Payment Following termination, the Parties shall negotiate a fair and equitable settlement. The Government shall pay the Performer for:
1. All work acceptably performed and milestones completed prior to the effective date of termination.
2. Reasonable, demonstrable costs incurred by the Performer as a direct result of the termination, such as costs for settling subcontracts.
For the purpose of this settlement, the Performer is not required to comply with the Cost Accounting Standards or the cost principles of the Federal Acquisition Regulation (FAR). However, the Government reserves the right to audit only those records necessary to verify the specific costs claimed as part of the termination settlement. The Performer shall not be paid for any costs or materials that could have been reasonably avoided or canceled.
Article: Termination for Default A. General Default and Cure Notice For any failure by a Party to perform a material obligation under this Base Agreement or an active PLA, the non-breaching Party may provide a written “cure notice” to the breaching Party. The notice shall describe the failure in reasonable detail and state the intent to terminate if the failure is not corrected. The breaching Party shall have thirty (30) days from receipt of the notice (or a longer period if mutually agreed) to cure the failure to the non-breaching Party’s reasonable satisfaction. If the breaching Party fails to cure the material failure within the specified period, the non-breaching Party may terminate this Agreement for default.
B. Termination for Failure to Maintain Good Standing Notwithstanding the cure period described in Section A, the Government may terminate this Agreement for default, effective immediately upon written notice, for failure to maintain “Good Standing.” A failure to maintain Good Standing includes, but is not limited to:
1. Failure to maintain a current and valid Joint Certification Program (JCP) certification.
2. Failure to maintain a compliant cybersecurity posture. This includes the failure to achieve, and thereafter maintain, at a minimum, a current CMMC Level 2 Self-Assessment by the 10 November 2026 deadline established by the Agreements Officer, or failure to flow down requirements to subcontractors.
3. A material breach of the Cyber Incident Reporting requirements (e.g., failure to rapidly report an incident within 72 hours).
Upon discovery of a security or compliance breach, the Agreements Officer shall issue an immediate suspension of work on all affected PLAs. If the Performer fails to initiate corrective action or coordinate a security remediation plan with the 704TG Security Office within thirty (30) calendar days, the Government may immediately discontinue the affected PLAs or the Base Agreement for Cause.
C. Settlement In the event of a termination for default under either Section A or B, the Parties shall negotiate an equitable settlement. The Government shall pay for any work acceptably performed and delivered prior to termination. The settlement shall also account for any demonstrable damages incurred by the non-breaching Party as a direct result of the default. Any rights or remedies provided by law shall be preserved.
Article: Title and Ownership A. Title to Deliverables Title to the prototype and any other physical items delivered by the Performer under this Agreement or an active PLA shall pass to the Government upon the Government’s formal written acceptance of those items.
This transfer of title is effective regardless of when or where the Government takes physical possession.
B. Title to Government Property Title to any property furnished by the Government to the Performer for use under this Agreement or an active PLA (“Government-Furnished Property”) shall remain with the Government at all times.
Article: Limited Warranty A. Express Limited Warranty The Performer warrants that for a period of TBD from the date of Government acceptance, the prototype will be free from defects in materials and workmanship and will conform to the mutually agreed-upon design specifications detailed in this Agreement.
B. Disclaimer of Other Warranties
THE EXPRESS LIMITED WARRANTY IN PARAGRAPH (A) IS THE SOLE AND EXCLUSIVE
WARRANTY PROVIDED. THE PERFORMER HEREBY DISCLAIMS ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE.
C. Exclusive Remedy The Government shall provide prompt written notice to the Performer of any breach of the limited warranty. The Performer’s sole obligation, and the Government’s exclusive remedy, shall be for the Performer, at its own expense, to either repair or replace the defective item.
D. Exclusions This warranty shall not apply to any defect arising from: (1) normal wear and tear; (2) modifications made by the Government without the Performer’s consent; or (3) damage caused by accident, abuse, or use of the prototype in a manner for which it was not designed after it has been accepted by the Government.
Article: Limitation of Liability A. Disclaimer of Consequential Damages
IN NO EVENT SHALL EITHER PARTY BE LIABLE TO THE OTHER FOR ANY INDIRECT,
SPECIAL, INCIDENTAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR IN
CONNECTION WITH THIS AGREEMENT.
B. Cap on Direct Damages Except for the obligations set forth in the “Intellectual Property Indemnification” article and liability for willful misconduct, each Party’s total cumulative liability to the other for direct damages arising from or related to this Agreement shall not exceed the total price of this Agreement. For the purposes of this article, the “total price” is defined as the sum of all funds paid or obligated to be paid by the Government for the base effort and any options that have been formally exercised.
Article: Compliance with Law and Agreement Status A. General Compliance The Performer shall comply with all Federal, State, and local laws that are generally applicable to commercial businesses operating within the United States.
B. Status of this Agreement The Parties agree and acknowledge that this Agreement is an Other Transaction executed under the authority of 10 U.S.C. § 4022. It is not a procurement contract and is therefore not subject to the Federal Acquisition Regulation (FAR) or its supplements, except for any law or regulation that is made specifically applicable to Other Transactions by Federal statute.
Article: Specific Statutory Requirements A. Agreement Status The Parties acknowledge that this Agreement is an Other Transaction executed under the authority of 10 U.S.C. § 4022 and is not a Federal procurement contract. As such, it is not subject to the laws and regulations specifically applicable to procurement contracts.
B. Applicable Statute The Performer agrees to comply with 31 U.S.C. § 1352, “Limitation on use of appropriated funds to influence certain Federal contracting and financial transactions,” which is made applicable to this Agreement by law. This statute requires the Performer to certify that it has not and will not use federally appropriated funds to lobby any Federal agency or Congress in connection with the award or modification of this Agreement.
Article: Third-Party Terms of Service (TOS) and End User License Agreements (EULAs) A. Context The Parties acknowledge that performance under this Agreement may require the use of commercial products or services (e.g., software, cloud services) that are subject to a provider’s standard EULA or
TOS.
B. Unenforceable Provisions The U.S. Government is prohibited by Federal law (including the Anti-Deficiency Act, 31 U.S.C. § 1341) from agreeing to certain terms commonly found in commercial EULAs and TOS. Accordingly, any provision that would create an open-ended or undefined financial obligation for the Government, including but not limited to clauses requiring indemnification of the provider, is unenforceable against the Government and shall be deemed stricken from such EULA or TOS.
C. Acceptance of Terms No action by a Government employee or authorized end-user, including the act of clicking “I agree” to a “click-wrap” or “browse-wrap” agreement, shall be construed as binding the Government to any unenforceable provision as described in Paragraph B.
D. Exception This article does not apply to any indemnification by the Government that is expressly authorized by a separate Federal statute.
Article: Limitation of Obligation and Milestone Funding A. Master Base Agreement Funding Ceiling ($0.00 Obligation)
1. $0.00 Master Obligation: The Parties explicitly agree that this Base Agreement carries a funded obligation of $0.00 at the time of award and establishes no direct financial commitment or liability on the part of the Government.
2. Programmatic Ceiling: The total estimated programmatic ceiling across all Project-Level Agreements (PLAs) that may be awarded under this 10-year master vehicle is expected to be less than $50,000,000.00. This ceiling represents a budgetary projection and does not constitute an allotment of funds or guarantee of future awards.
B. PLA Level Funding Allotment and Anti-Deficiency Compliance
1. Discrete Project Obligations: Government funds shall be obligated exclusively through bilaterally executed PLAs citing valid Department of the Air Force fiscal-year appropriations (e.g., RDT&E / 3600 funds).
2. Limitation of Liability: The Government’s total financial liability for each prototype effort is strictly limited to the specific dollar amount obligated on that individual PLA. The Performer is not authorized to perform work, allocate faculty/student effort, or procure prototype materials in excess of the funds obligated on an executed PLA.
C. Milestone Allotment Progression
1. Milestone Linkage: An individual PLA may be fully funded upon initial award or incrementally funded by milestone. When incrementally funded, the PLA shall designate exactly which payable milestones (e.g., PLA-MS 1.0, PLA-MS 2.0) are funded and authorized for performance.
2. No Cost Burn Tracking: Funding under this Agreement is milestone-based, not cost-reimbursement.
The Performer is not required to submit cost-burn tracking reports or 80% expenditure threshold notices.
3. Authorization to Stop Work: If an incrementally funded PLA has not received additional funding allotment for subsequent milestones at least thirty (30) calendar days prior to the completion of the currently funded milestone, the Performer shall provide written notice to the Agreements Officer and shall not be obligated to commence work on unfunded milestones.
D. Funding of Future Milestones and PLAs
1. Discretionary Allotment: The Government anticipates allotting funds for subsequent milestones and issuing future PLAs as research requirements mature, subject to the availability of annual Congressional appropriations.
2. Formal Modifications: The allotment of additional funding to active PLAs shall be executed via written modification by the Agreements Officer. Nothing in this Base Agreement or any PLA shall be construed as obligating the Government to allot additional funds or award subsequent PLAs at any time.
Article: Intellectual Property Rights A. Guiding Principles The Parties agree to a fair allocation of rights in intellectual property that reflects each Party’s contribution to its development. The goal is to provide the Government with the rights it needs for its purposes while preserving the Performer’s ability to commercialize its technology.
B. Definitions
1. “Unlimited Rights”: The right for the Government to use, disclose, reproduce, prepare derivative works, distribute, and perform publicly and display publicly, in any manner and for any purpose whatsoever, and to have or permit others to do so.
2. “Government Purpose Rights”: The right to use, modify, reproduce, release, or disclose the technical data or computer software within the Government without restriction; and to release or disclose the data/software outside the Government and permit its use for U.S. Government purposes only. This includes the right to authorize a third party to use the data/software to manufacture an item for the direct use of the U.S. Government.
3. “Limited Rights” (for Technical Data) / “Restricted Rights” (for Computer Software): The right to use, modify, and reproduce the data/software within the Government only. This right does not include permission to disclose the data/software outside the Government or use it for manufacturing without the Performer’s express written permission.
C. Allocation of Rights
1. Exclusively with Government Funds: The Government shall receive Unlimited Rights in all technical data and computer software developed exclusively with Government funds under this Agreement.
2. Exclusively at Private Expense: The Government shall receive Limited/Restricted Rights in all technical data and computer software that was developed exclusively at the Performer’s private expense (i.e., background IP).
3. With Mixed Funding: The Government shall receive Government Purpose Rights in all technical data and computer software developed with a mix of Government and Performer funding under this Agreement. The Performer’s cost-share contribution under this Agreement qualifies its developments for this category.
D. Marking of Data and Software To claim any rights other than Unlimited Rights, the Performer must mark all technical data and computer software with an appropriate restrictive legend identifying the rights asserted. Any data or software delivered without a restrictive legend shall be presumed to have been delivered with Unlimited Rights.
E. Invention Disclosure The Performer shall promptly disclose in writing to the Agreements Officer each invention conceived or first actually reduced to practice in the performance of this Agreement. Title to all such inventions shall remain with the Performer, subject to the Government’s license rights as described herein.
F. Sub-agreements The Performer shall include this Article, suitably modified to identify the parties, in its sub-agreements.
The Performer remains responsible for ensuring the Government acquires all the rights it is entitled to under this Article.
Article: Stop-Work Order A. Issuance of Order The Agreements Officer (AO) may, at any time, by written order to the Performer, require the Performer to stop all, or any part, of the work required by this Agreement or individual PLA for a specified period.
Upon receipt of the order, the Performer shall immediately comply with its terms and take all reasonable steps to minimize the incurrence of costs allocable to the work covered by the order.
B. Action Following Stoppage Upon the conclusion of the stop-work period, the AO shall either:
1. Cancel the Stop-Work Order and direct the Performer to resume work; or
2. Terminate the work covered by the order in accordance with the “Termination” article of this
Agreement.
C. Equitable Adjustment If a Stop-Work Order is canceled and the Performer resumes work, the Parties shall negotiate an equitable adjustment to the delivery schedule, price, or any other term of the Agreement affected by the work stoppage, provided that:
1. The stop-work order resulted in an increase in the time or cost required for the performance of any part of this Agreement; and
2. The Performer notifies the AO of its intent to seek an adjustment within thirty (30) days after the work resumes.
Article: Delivery A. Delivery Responsibility The Performer shall be responsible for all arrangements, handling, packaging, transit insurance, and transportation costs necessary to deliver all physical prototypes, components, test fixtures, and deliverables to the destination(s) specified in the governing Project-Level Agreement (PLA).
Unless an alternative testing location or laboratory is designated within a specific PLA, the primary delivery destination for all physical deliverables shall be: 704th Test Group (704TG), Holloman Air Force Base, New Mexico (NM).
B. Risk of Loss Risk of loss or damage to all items and deliverables shall remain with the Performer until the Government’s formal written acceptance of those items, as further defined in the “Demonstration, Review, and Acceptance” article.
C. Good Order and Condition All items shall be delivered in good order and condition, conforming to the requirements of this Agreement. The Performer shall provide the Government with a delivery schedule and necessary shipping documentation.
Article: Defense Priorities and Allocation System (DPAS) This Agreement is a rated order, certified for national defense, emergency preparedness, and energy program use under the Defense Priorities and Allocations System (DPAS). The Performer shall comply with all applicable requirements of the DPAS regulation (15 CFR Part 700). The DPAS rating is DO-C9 for all PLAs unless otherwise specified.
Article: System for Award Management (SAM) The Performer shall maintain an active registration in the System for Award Management (SAM) for the purposes of entity validation and electronic payment processing. This registration must be maintained throughout the entire period of performance of this Agreement, including through final payment.
The Parties agree that this requirement is for administrative and payment purposes only and does not incorporate the standard Federal Acquisition Regulation (FAR) “Representations and Certifications” from the SAM.gov portal into this Other Transaction Agreement. The Performer’s binding representations for this Agreement are exclusively those stated in the “Performer Representations” article.
Article: Joint Certification Program (JCP) The Performer shall obtain and maintain a valid certification under the Joint Certification Program (JCP) as a prerequisite to receive any export-controlled technical data under this Agreement, if applicable.
The Performer is responsible for managing its own certification status.
Article: Cybersecurity Requirements (CUI and CMMC) A. Baseline Security and NIST SP 800-171 Implementation
1. Adequate Security: The Performer shall provide adequate security on all covered information systems used in the performance of any Project-Level Agreement. The Performer shall only process, store, or transmit Controlled Unclassified Information (CUI) or Federal Contract Information (FCI) on information systems that meet the security requirements established in this Article.
2. NIST SP 800-171: The Performer shall implement and maintain the 110 security controls detailed in the National Institute of Standards and Technology (NIST) Special Publication (SP) 800-171. Implementation shall be documented in a System Security Plan (SSP) and, where applicable, a Plan of Action and Milestones (POA&M).
3. Cloud Computing: If the Performer utilizes an external cloud service provider to store, process, or transmit CUI, the Performer shall ensure the cloud service provider meets security requirements equivalent to the Federal Risk and Authorization Management Program (FedRAMP) Moderate baseline and complies with the incident reporting and media preservation requirements of this Article.
B. Cybersecurity Maturity Model Certification (CMMC)
1. Baseline Requirement: The foundational cybersecurity requirement for this agreement is a CMMC
Level 2 Self-Assessment. Regardless of the Performer’s cybersecurity posture upon entry, are required to achieve this baseline.
2. Universal Deadline and Maintenance: This baseline requirement must be achieved by the 10 November 2026 deadline established by the Agreements Officer. Thereafter, to remain in good standing, the Performer 0 must uphold this posture by maintaining a current (not expired) CMMC Level 2 Self-Assessment for the entire duration of the agreement. A valid CMMC Level 2 C3PAO Certification or CMMC Level 3 Certification also satisfies this maintenance requirement.
3. Annual Affirmations: The Performer shall complete and maintain an annual affirmation of continuous compliance in the Supplier Performance Risk System (SPRS). This affirmation must be submitted by a senior company affirming official for each applicable CMMC Unique Identifier (UID) associated with the systems used in performance of PLAs.
C. Cyber Incident Reporting and Response
1. 72-Hour Reporting: When the Performer discovers a cyber incident that affects a covered information system, affects CUI residing therein, or affects the Performer’s ability to perform operationally critical support, the Performer shall rapidly report the incident to DoD at https://dibnet.dod.mil within 72 hours of discovery.
2. Medium Assurance Certificate: The Performer shall acquire and maintain a DoD-approved medium assurance certificate to report cyber incidents.
3. Malicious Software: If malicious software is discovered and isolated in connection with a reported cyber incident, the Performer shall submit the malicious software directly to the DoD Cyber Crime Center (DC3) in accordance with DC3 instructions.
4. Media Preservation: The Performer shall preserve and protect images of all known affected information systems and relevant monitoring/packet capture data for at least 90 days from the submission of the cyber incident report to allow the Government to request the media or decline interest.
5. Forensic and Damage Assessment Access: Upon request, the Performer shall provide the Government with access to additional information, equipment, and all damage assessment information necessary to conduct forensic analysis.
6. Information Protection: The Government will protect against the unauthorized use or release of Contractor attributional/proprietary information reported under this section, releasing it outside DoD only for authorized national security, law enforcement, or incident mitigation purposes.
D. Government Assessments (Medium and High)
1. Assessment Rights: The Government reserves the right to conduct a Medium or High NIST SP 800-171 DoD Assessment (e.g., via the Defense Contract Management Agency (DCMA) or other authorized personnel) to verify the security controls described in the Performer’s SSP. The Performer shall provide necessary access to facilities, systems, and personnel.
2. Precedence and Rebuttal: The results of a Government-conducted Medium or High Assessment will take precedence over self-assessments. Upon completion of an assessment, the Performer shall have 14 business days to provide additional information to rebut findings prior to the Government posting the summary level scores to SPRS.
E. Sub-agreement Flow-Down Requirements The Performer is responsible for ensuring the security of CUI flowed down to its subcontractors. The Performer shall:
1. Include the substance of this entire Cybersecurity Article in all sub-agreements (including those for commercial products or services) that involve the processing, storing, or transmitting of FCI or CUI.
2. Prior to awarding a sub-agreement, verify that the subcontractor has the current, appropriate CMMC status required for the information being flowed down.
3. Ensure subcontractors complete and maintain their own annual SPRS affirmations of continuous compliance.
4. Require subcontractors to rapidly report cyber incidents to DoD and provide the incident report number to the prime Performer.
Article: Country of Origin A. Policy It is the policy of the Department of Defense to prioritize products and components manufactured in the United States or its qualifying countries.
B. Performer Representation The Performer represents that, to the best of its ability and knowledge, the end products delivered under this Agreement will be manufactured in the United States or a “qualifying country.” For the purposes of this article, a “qualifying country” is defined as a country that has a reciprocal defense procurement memorandum of understanding or international agreement with the United States. As of the date of this Agreement, these countries include: Australia, Austria, Belgium, Canada, Czech Republic, Denmark, Egypt, Estonia, Finland, France, Germany, Greece, Israel, Italy, Japan, Latvia, Lithuania, Luxembourg, Netherlands, Norway, Poland, Portugal, Slovenia, Spain, Sweden, Switzerland, Turkey, and the United Kingdom.
C. Waiver The Government’s Agreements Officer may authorize the acquisition of products from other countries if it is determined to be in the Government’s best interest for the successful execution of this prototype project.
Article: Cyber Incident Reporting and Response A. Definition of Cyber Incident For the purposes of this article, a “Cyber Incident” is an action taken through the use of computer networks that results in a compromise or an actual or potentially adverse effect on the Performer’s information system or the Controlled Unclassified Information (CUI) residing therein.
B. Incident Reporting Requirement
1. Rapid Reporting: When the Performer discovers a Cyber Incident, it shall rapidly report the incident (within 72 hours) to the Department of Defense at the DIBNet portal: https://dibnet.dod.mil.
2. Access Certificate: The Performer is responsible for obtaining and maintaining the required DoD-approved medium assurance certificate to access the DIBNet portal for reporting.
C. Post-Incident Cooperation Following a Cyber Incident report, the Performer shall:
1. Preserve Data: Preserve and protect images of all known affected information systems and all relevant monitoring and packet capture data for at least 90 days from the submission of the report.
2. Provide Access: Upon request from the Agreements Officer, provide the Government with access to additional information or equipment necessary to conduct a forensic analysis and damage assessment.
3. Submit Malicious Software: Submit any malicious software discovered in connection with the incident to the DoD Cyber Crime Center (DC3) in accordance with their instructions.
D. Protection of Performer Information The Government shall protect any of the Performer’s confidential or proprietary information that is shared during an incident investigation to the maximum extent permitted by law, including through the exercise of applicable Freedom of Information Act (FOIA) exemptions.
E. Sub-agreements The Performer shall flow down the substance of these reporting and cooperation requirements to all sub-agreements where CUI is handled. The Performer shall require its subcontractors to rapidly report any Cyber Incident directly to the Performer, who is then responsible for reporting to the DoD in accordance with this article.
Article: Prohibited Sources A. Prohibition on Certain Telecommunications and Video Surveillance Equipment (Section 889) In accordance with Section 889 of the National Defense Authorization Act for Fiscal Year 2019, the Performer is prohibited from providing or using telecommunications or video surveillance equipment or services produced or provided by Huawei Technologies Company, ZTE Corporation, Hytera Communications Corporation, Hangzhou Hikvision Digital Technology Company, Dahua Technology Company, or their subsidiaries.
B. Prohibition on Covered Defense Telecommunications Equipment or Services (Section 1656) In accordance with Section 1656 of the National Defense Authorization Act for Fiscal Year 2018, the Performer is prohibited from providing any equipment, system, or service that uses telecommunications equipment or services from The People’s Republic of China or The Russian Federation in systems supporting DoD’s nuclear deterrence or homeland defense missions.
C. Prohibition on Kaspersky Lab Products and Services (Section 1634) In accordance with Section 1634 of the National Defense Authorization Act for Fiscal Year 2018, the Performer is prohibited from providing to the Government, or using in the performance of this Agreement, any hardware, software, or service developed or provided, in whole or in part, by Kaspersky Lab or its affiliates.
D. Prohibition on Certain Items from Communist Chinese Military Companies (Section 1261) In accordance with Section 1261 of the National Defense Authorization Act for Fiscal Year 2021, the Performer is prohibited from acquiring any items covered by the United States Munitions List (USML) or the “600 series” of the Commerce Control List (CCL), directly or indirectly, from any entity identified as a “Communist Chinese military company” by the Department of Defense.
E. Performer Representation By executing this Agreement, the Performer represents that it will not provide or use any items, equipment, or services prohibited by the statutes referenced in Paragraphs A, B, C, and D.
F. Reporting and Flowdown The Performer shall promptly report any discovery of such prohibited equipment, products, or services to the Agreements Officer and shall flow down the substance of this entire article to all sub-agreements.
Article: Prohibition on ByteDance Covered Applications A. Prohibition In accordance with the “No TikTok on Government Devices Act,” the Performer is prohibited from having or using a “covered application” on any “project information technology.”
B. Definitions
1. Covered Application: Means the social networking service TikTok or any successor application or service developed or provided by ByteDance Limited or its affiliates.
2. Project Information Technology: Means any information technology (including computers, mobile devices, and software) used by the Performer or its employees in the performance of this Agreement. This also includes any information technology owned or managed by the Government that the Performer may use.
C. Exception This prohibition does not apply if the Agreements Officer provides prior written notification to the Performer that a mission-critical exception has been granted in accordance with Federal policy.
D. Sub-agreements The Performer shall flow down the substance of this article to all sub-agreements at any tier.
Article: Comptroller General Access to Records In accordance with 10 U.S.C. § 4022(c)(1), the Comptroller General of the United States, or an authorized representative, shall have access to and the right to examine any records of the Performer, or any of its subcontractors, that directly pertain to this Agreement. This right of access shall exist for a period of three
(3) years after final payment under this Agreement.
Article: Phased Execution and Optional Milestones A. Phased Approach The Parties anticipate that this prototype effort may be accomplished in multiple, sequential phases. The initial scope of work and funding under this Agreement cover the “base” phase(s) as detailed in the Statement of Work. Future phases of work are referred to herein as “Options.”
B. Definition and Exercise of Options
1. Definition for This Agreement: For the purposes of this Agreement, an “Option” is defined as a potential future phase of work that is not yet authorized or funded.
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .