DRAFT_RFP_FA8818-13-R-0021_26MAR13.pdf

DRAFT

SOLICITATION, OFFER AND AWARD

1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 350)

RATING

N

PAGE OF PAGES

1 49

2. CONTRACT NO. 3. SOLICITATION NO. 4. TYPE OF SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)

5. DATE ISSUED

6. REQUISITION/PURCHASE NO.

FA8818-13-R-0021

7. ISSUED BY SD/PKT CODE FA8818 8. ADDRESS OFFER TO (If other than Item 7)

SD/PKT

CONTRACTING DIVISION

3548 ABERDEEN AVE SE

KIRTLAND AFB, NM 87117-5778

CECILIA D. CANTU (505)853-3146

CECILIA.CANTU@KIRTLAND.AF.MIL

NOTE: In sealed bid solicitations “offer” and “offeror” mean “bid” and “bidder”.

SOLICITATION

9.

10. FOR

INFORMATION

CALL:

A. NAME

ANGELICA R. ARMENTA

B. TELEPHONE (Include area code)

(NO COLLECT CALLS)

C. E-MAIL ADDRESS

11. TABLE OF CONTENTS

() SEC. DESCRIPTION PAGE(S) () SEC DESCRIPTION PAGE(S)

PART I - THE SCHEDULE PART II - CONTRACT CLAUSES

A SOLICITATION/CONTRACT FORM 1 I CONTRACT CLAUSES 36

B SUPPLIES OR SERVICES AND PRICES/COSTS 2 PART III - LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACH.

C DESCRIPTION/SPECS./WORK STATEMENT 22 J LIST OF ATTACHMENTS 49

D PACKAGING AND MARKING 23 PART IV - REPRESENTATIONS AND INSTRUCTIONS

E INSPECTION AND ACCEPTANCE 24 K REPRESENTATIONS, CERTIFICATIONS, K - 1

F DELIVERIES OR PERFORMANCE 25 AND OTHER STATEMENTS OF OFFERORS

G CONTRACT ADMINISTRATION DATA 26 L INSTRS, CONDS, AND NOTICES TO OFFERORS L - 1

H SPECIAL CONTRACT REQUIREMENTS 29 M EVALUATION FACTORS FOR AWARD M - 1

OFFER (Must be fully completed by offeror) NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

12. In compliance with the above, the undersigned agrees, if this offer is accepted within ____ ____ calendar days (60 calendar days unless a different period is inserted by the offeror) from the date of receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. DISCOUNT FOR PROMPT PAYMENT

(See Section I, Clause No. 52.232-8)

10 CALENDAR DAYS

20 CALENDAR DAYS

30 CALENDAR DAYS

CALENDAR DAYS

14. ACKNOWLEDGEMENTS OF AMENDMENTS

(The offeror acknowledges receipt of amend-

AMENDMENT NO. DATE AMENDMENT NO. DATE

ments to the SOLICITATION for offerors and related documents numbered and dated:

15A. NAME

AND

CODE FACILITY 16. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN

OFFER (Type or print)

ADDRESS

OF

OFFEROR

15B. TELEPHONE NO. (Include area code)

15C. CHECK IF REMITTANCE ADDRESS

IS DIFFERENT FROM ABOVE - ENTER

SUCH ADDRESS IN SCHEDULE.

17. SIGNATURE 18. OFFER DATE

AWARD (To be completed by Government)

19. ACCEPTED AS TO ITEMS NUMBERED 20. AMOUNT 21. ACCOUNTING AND APPROPRIATION

22. AUTHORITY FOR USING OTHER THAN FULL AND OPEN COMPETI-

TION: 23. SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

ITEM

10 U.S.C. 2304(c) ( ) 41 U.S.C. 253(c) ( )

24. ADMINISTERED BY (If other than Item 7) CODE 25. PAYMENT WILL BE MADE BY CODE

26. NAME OF CONTRACTING OFFICER (Type or print) 27. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

28. AWARD DATE

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

AUTHORIZED FOR LOCAL REPRODUCTION STANDARD FORM 33 (REV. 9-97)

PREVIOUS EDITION IS UNUSABLE Prescribed by GSA ConWrite Version 6.14.1 FAR (48 CFR) 53.21(c) Created 26 Mar 2013 2:58 PM

PART I - THE SCHEDULE

SECTION B - SUPPLIES OR SERVICES AND PRICES/COSTS

SECTION B FA8818-13-R-0021

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

0001 __________ Noun: EXCESS BALLISTIC MISSILE (XBM) SUSTAINMENT

ENGINEERING

Contract type: L - FIXED PRICE INCENTIVE FIRM Start Date: 16 DEC 2013 Completion Date: 15 DEC 2014 Descriptive Data:

The contractor shall furnish the necessary qualified personnel, services, travel and materials to accomplish the Performance Work Statement (PWS) paragraphs 3.1, 4.0, 5.0, 6.0, 7.0 and 8.0 at Section J, Attachment 1.

LEVEL A (2-3 Static Fire Tests per year)

Target Cost Target Profit (%TBD) Total FPIF

Ceiling Price (115%): $ TBD Profit Adjustment Formula (G/C) Over Share Ratio: 40/60 Under Share Ratio: 60/40

LEVEL B (4-5 Static Fire Tests per year)

TTarget Cost Target Profit (%TBD) Total FPIF

Ceiling Price (115%): $ TBD Profit Adjustment Formula (G/C) Over Share Ratio: 40/60 Under Share Ratio: 60/40

LEVEL C (6-7 Static Fire Tests per year)

Target Cost Target Profit (%TBD) Total FPIF

Ceiling Price (115%): $ TBD Profit Adjustment Formula (G/C)

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

0002 OPTION CLIN (service) __________

Noun: OPTION I - XBM SUSTAINMENT ENGINEERING (16 DEC 14

- 15 DEC 15)

Descriptive Data:

The contractor shall furnish the necessary qualified personnel, services, travel and

Ceiling Price (115%): $ TBD Profit Adjustment Formula (G/C)

LEVEL C (6-7 Static Fire Tests per year)

0003 OPTION CLIN (service) __________

Noun: OPTION II - XBM SUSTAINMENT ENGINEERING (16 DEC

15 - 15 DEC 16)

Descriptive Data:

The contractor shall furnish the necessary qualified personnel, services, travel and

Ceiling Price (115%): $ TBD Profit Adjustment Formula (G/C)

Ceiling Price (115%): $ TBD Profit Adjustment Formula (G/C)

0004 OPTION CLIN (service) __________

Noun: OPTION III - XBM SUSTAINMENT ENGINEERING (16 DEC

16 - 15 DEC 17)

Descriptive Data:

The contractor shall furnish the necessary qualified personnel, services, travel and

Ceiling Price (115%): $ TBD Profit Adjustment Formula (G/C)

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

0005 OPTION CLIN (service) __________

Noun: OPTION IV - XBM SUSTAINMENT ENGINEERING (16 DEC

17 - 15 DEC 18)

Descriptive Data:

The contractor shall furnish the necessary qualified personnel, services, travel and

Ceiling Price (115%): $ TBD Profit Adjustment Formula (G/C)

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

0006 OPTION CLIN (service) __________

Noun: OPTION V - TRANSITION (16 OCT 18 - 15 DEC 18) Descriptive Data:

The contractor shall furnish the necessary qualified personnel, services, travel and materials to accomplish the Performance Work Statement (PWS) paragraph 3.4 at Section J, Attachment 1.

FFP: $ TBD

Noun: DATA Descriptive Data:

Contract Type: FIXED PRICE INCENTIVE FIRM (FPIF) Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

NOT SEPARATELY PRICED - NSP

The contractor shall furnish data and reports in accordance with Section J, Exhibit A, Contract Data Requirements List (DD 1423), and Attachment 1, Performance Work

Statement (PWS) attached hereto and made a part hereof. The price of this CLIN is included in the price of all FPIF CLIN(s).

Noun: DATA Descriptive Data:

Contract Type: FIRM FIXED PRICE (FFP) Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

NOT SEPARATELY PRICED - NSP

The contractor shall furnish data and reports in accordance with Section J, Exhibit A, Contract Data Requirements List (DD 1423), and Attachment 1, Performance Work included in the price of all FFP CLIN(s).

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

Noun: DATA Descriptive Data:

Contract Type: COST PLUS FIXED FEE (CPIF) Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

NOT SEPARATELY PRICED - NSP

The contractor shall furnish data and reports in accordance with Section J, Exhibit A, Contract Data Requirements List (DD 1423), and Attachment 1, Performance Work included in the price of all CPIF CLIN(s).

CPIF IV&V Mission Services - 1000 SERIES

1000 __________ Noun: PAP MCS DEMO - NEW LAUNCH SYSTEM IV&V SAMPLE

MISSION 2.1

Contract type: V - COST PLUS INCENTIVE FEE Start Date: 01 JAN 2014 Completion Date: 31 AUG 2017 Descriptive Data:

The contractor shall furnish the necessary qualified personnel, services, travel and materials to accomplish the Performance Work Statement (PWS) paragraphs 3.2.1, 3.2.2, 3.2.3, 4.0, 5.0, 6.0, 7.0 and 8.0 at Section J, Attachment 1.

ACA Required: ATK Corporation, Aerojet Inc., LSC, Tecolote Research, Inc., Aero

Thermo Technology, Inc.

ILC: 15 Dec 2016

CPIF IV&V Mission Services will be ordered within this series of CLIN(s) in accordance with Section H Clause SD/PKT - H005 "Technical Services" and Pre-

Negotiated Labor Rates at Section J, Attachment 4 "Labor Rate Schedule"

Target Cost Target Profit (%TBD) Total CPIF

Minimum Fee (3%): $

Maximum Fee (12%): $

Government Contractor Over Share Ratio: 60 40 Under Share Ratio: 60 40

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

1001 __________ Noun: MINOTAUR 6 - NEW LAUNCH SYSTEM IV&V SAMPLE

MISSION 2.2

Contract type: V - COST PLUS INCENTIVE FEE Start Date: 02 JUL 2018 Completion Date: 30 SEP 2020 Descriptive Data:

The contractor shall furnish the necessary qualified personnel, services, travel and

3.2.2, 3.2.5, 3.2.6, 4.0, 5.0, 6.0, 7.0 and 8.0 at Section J, Attachment 1.

ACA Required: LSC, Tecolote Research, Inc. Aero Thermo Technology, Inc.

ILC: 15 Jun 2020

CPIF IV&V Mission Services will be ordered within this series of CLIN(s) in accordance with Section H Clause SD/PKT - H005 "Technical Services" and

Attachment 4 "Labor Rate Schedule"

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

1002 __________ Noun: MRBM-T1 - NEW LAUNCH SYSTEM IV&V SAMPLE

MISSION 2.3

Contract type: L - FIXED PRICE INCENTIVE FIRM Start Date: 02 JAN 2014 Completion Date: 30 APR 2019 Descriptive Data:

The contractor shall furnish the necessary qualified personnel, services, travel and materials to accomplish the Performance Work Statement (PWS) paragraphs 3.2.4, 3.2.5, 3.2.6, 4.0, 5.0, 6.0, 7.0 and 8.0 at Section J, Attachment 1.

ILC #1: Feb 2016

ILC #2: Feb 2017

ILC #3: Feb 2018

ILC #3: Feb 2019

CPIF IV&V Mission Services will be ordered within this series of CLIN(s) in accordance with Section H Clause SD/PKT - H005 "Technical Services" and

Attachment 4 "Labor Rate Schedule"

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

1003 __________ Noun: MRBM-T2- NEW LAUNCH SYSTEM IV&V SAMPLE MISSION

2.4 Contract type: V - COST PLUS INCENTIVE FEE Start Date: 02 JAN 2014 Completion Date: 30 APR 2020 Descriptive Data:

The contractor shall furnish the necessary qualified personnel, services, travel and

3.2.5, 3.2.6, 4.0, 5.0, 6.0, 7.0 and 8.0 at Section J, Attachment 1.

ILC #1: Feb 2016

ILC #2: Jun 2017

ILC #3: Feb 2019

ILC #4: Feb 2020

CPIF IV&V Mission Services will be ordered within this series of CLIN(s) in accordance with Section H Clause SD/PKT - H005 "Technical Services" and

Attachment 4 "Labor Rate Schedule"

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

FPIF IV&V Mission Services - 2000 SERIES

2000 __________ Noun: NASA SUBORBITAL - EXISTING IV&V - SAMPLE MISSION

3.1 Contract type: L - FIXED PRICE INCENTIVE FIRM Start Date: 02 JAN 2014 Completion Date: 30 SEP 2015 Descriptive Data:

The contractor shall furnish the necessary qualified personnel, services, travel and

3.2.2, 3.2.3, 3.2.5, 3.2.6, 4.0, 5.0, 6.0, 7.0 and 8.0 at Section J, Attachment 1.

ILC: 15 Jun 2015

2000 SERIES CLINS: FPIF IV&V Mission Services will be ordered within this series of CLIN(s) in accordance with Section H Clause SD/PKT - H005 "Technical

Services" and Attachment 4 "Labor Rate Schedule"

Ceiling Price (120%): $TBD

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

2001 __________ Noun: ORS-2 - EXISTING IV&V - SAMPLE MISSION 3.2 Contract type: L - FIXED PRICE INCENTIVE FIRM Start Date: 02 JAN 2014 Completion Date: 31 AUG 2016 Descriptive Data:

The contractor shall furnish the necessary qualified personnel, services, travel and

3.2.2, 3.2.3, 3.2.5, 4.0, 5.0, 6.0, 7.0 and 8.0 at Section J, Attachment 1.

ILC: 15 Jun 2015

2000 SERIES CLINS: FPIF IV&V Mission Services will be ordered within this series of CLIN(s) in accordance with Section H Clause SD/PKT - H005 "Technical

Services" and Attachment 4 "Labor Rate Schedule"

Ceiling Price (120%): $.00

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

2002 __________ Noun: AFSPC-X - EXISTING IV&V - SAMPLE MISSION 3.3 Contract type: L - FIXED PRICE INCENTIVE FIRM Start Date: 04 JAN 2016 Completion Date: 28 SEP 2018 Descriptive Data:

The contractor shall furnish the necessary qualified personnel, services, travel and

3.2.2, 4.0, 5.0, 6.0, 7.0 and 8.0 at Section J, Attachment 1.

ILC: 15 Jun 2018

2000 SERIES CLINS: FPIF IV&V Mission Services will be ordered within this series of CLIN(s) in accordance with Section H Clause SD/PKT - H005 "Technical

Services" and Attachment 4 "Labor Rate Schedule"

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

2003 __________ Noun: STP-3 - EXISTING IV&V - SAMPLE MISSION 3.4 Contract type: L - FIXED PRICE INCENTIVE FIRM Start Date: 01 AUG 2017 Completion Date: 30 SEP 2020 Descriptive Data:

The contractor shall furnish the necessary qualified personnel, services, travel and

ILC: 15 Jun 2019

2000 SERIES CLINS: FPIF IV&V Mission Services will be ordered within this series of CLIN(s) in accordance with Section H Clause SD/PKT - H005 "Technical

Services" and Attachment 4 "Labor Rate Schedule"

Target Cost Target Profit (120%) Total FPIF

Ceiling Price (%TBD): $.00

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

2004 __________ Noun: NAVSAT - EXISTING IV&V - SAMPLE MISSION 3.5 Contract type: L - FIXED PRICE INCENTIVE FIRM Start Date: 02 JAN 2014 Completion Date: 30 SEP 2016 Descriptive Data:

The contractor shall furnish the necessary qualified personnel, services, travel and

CUSTOMER: SMC SPO

ILC: 15 Jun 2016

22000 SERIES CLINS: FPIF IV&V Mission Services will be ordered within this series of CLIN(s) in accordance with Section H Clause SD/PKT - H005 "Technical

Services" and Attachment 4 "Labor Rate Schedule"

Ceiling Price (120%): $TBD

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

2005 __________ Noun: NAVSAT 2 EXISTING LAUNCH SYSTEM IV&V SAMPLE

MISSION 3.6

Contract type: V - COST PLUS INCENTIVE FEE Start Date: 04 JAN 2016 Completion Date: 28 SEP 2018 Descriptive Data:

The contractor shall furnish the necessary qualified personnel, services, travel and materials to accomplish the Performance Work Statement (PWS) paragraphs 3.2.1, 4.0, ILC: 15 Jun 2015

2000 SERIES CLINS: FPIF IV&V Mission Services will be ordered within this series of CLIN(s) in accordance with Section H Clause SD/PKT - H005 "Technical

Services" and Attachment 4 "Labor Rate Schedule"

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

2006 __________ Noun: EMRBM EXISTING LAUNCH SYSTEM IV&V SAMPLE

MISSION 3.7

Contract type: V - COST PLUS INCENTIVE FEE Start Date: 02 OCT 2014 Completion Date: 30 APR 2015 Descriptive Data:

The contractor shall furnish the necessary qualified personnel, services, travel and

3.2.5, 4.0, 5.0, 6.0, 7.0 and 8.0 at Section J, Attachment 1.

ILC: 15 Jun 2015

2000 SERIES CLINS: FPIF IV&V Mission Services will be ordered within this series of CLIN(s) in accordance with Section H Clause SD/PKT - H005 "Technical

Services" and Attachment 4 "Labor Rate Schedule"

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

2007 __________ Noun: MRBM-T3 EXISTING LAUNCH SYTEM IV&V SAMPLE

MISSION 3.8

Contract type: V - COST PLUS INCENTIVE FEE Start Date: 02 JUN 2014 Completion Date: 31 DEC 2015 Descriptive Data:

The contractor shall furnish the necessary qualified personnel, services, travel and

3.2.5, 4.0, 5.0, 6.0, 7.0 and 8.0 at Section J, Attachment 1.

ILC: 15 Jun 2015

2000 SERIES CLINS: FPIF IV&V Mission Services will be ordered within this series of CLIN(s) in accordance with Section H Clause SD/PKT - H005 "Technical

Services" and Attachment 4 "Labor Rate Schedule"

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

FFP SPECIAL STUDIES - 3000 SERIES

3000 __________ Noun: PAP MCS DEMO SYSTEMS ENGINEERING SAMPLE

SPECIAL STUDY 4.1

Contract type: J - FIRM FIXED PRICE Start Date: 02 JAN 2014 Completion Date: 31 JAN 2017 Descriptive Data:

The contractor shall furnish the necessary qualified personnel, services, travel and materials to accomplish the Performance Work Statement (PWS) paragraphs 3.3, 4.0, CUSTOMER: AFNWC

ACA Required: MAC, LSC, Tecolote Research, Inc. Aero Thermo Technology, Inc., AFNWC

ILC: 15 Dec 16

3001 __________ Noun: CONVENTIONAL STRIKE MISSILE BASING - SAMPLE

SPECIAL STUDY 4.2

Contract type: J - FIRM FIXED PRICE Start Date: 15 JAN 2014 Completion Date: 10 SEP 2014 Descriptive Data:

The contractor shall furnish the necessary qualified personnel, services, travel and materials to accomplish the Performance Work Statement (PWS) paragraphs 3.3, 4.0, CUSTOMER: AFNWC

ACA Required: MAC, LSC, Tecolote Research, Inc. Aero Thermo Technology, Inc., AFNWC

NOTICE: The following contract clauses pertinent to this section are hereby incorporated in full text:

OTHER CONTRACT CLAUSES IN FULL TEXT

B028 CONTRACT TYPE: FIRM FIXED PRICE (FEB 1997) (TAILORED)

Total Price: $.00 (TBD) Applies to Firm-Fixed-Price CLIN(s) only.

B030 CONTRACT TYPE: FIXED- PRICE- INCENTIVE -- FIRM TARGET (FEB 1997) (TAILORED)

The target cost, target profit, and target price contemplated by the contract clause entitled, "Incentive Price Revision-- Firm Target," are set forth in Section B, CLIN Descriptive Data. The contract line items subject to price revision, ceiling price, and the profit adjustment formula are set forth in 52.216-16.

Applicable to following Line Items: CLIN 0001, CLIN(s) 0002 - 0005 (Options I - IV) and 2000 FPIF Series CLIN(s) - Launch Service IV&V Applies to Fixed-Price Incentive (Firm Target) CLIN(s) only.

B039 CONTRACT TYPE: COST-PLUS-INCENTIVE FEE (FEB 1997) (TAILORED)

The target cost and fee for this contract are set forth in Section B, CLIN Descriptive Data. The applicable fixed fee or target fee may be increased or decreased only by negotiation and modification of the contract for added or deleted work as contemplated by the contract clause entitled, "Incentive Fee" - 52.216-10.

Applicable to following Line Items: CLIN(s) SERIES 3000 - CPIF Existing Launch System IV&V

B054 IMPLEMENTATION OF LIMITATION OF FUNDS (DEC 2005) (TAILORED)

Pursuant to the clause FAR 52.232-22 in Section I, entitled, "Limitation of Funds", the total amount available for payment and allotted to this contract for CLIN(s) TBD is $TBD. It is estimated that this amount is sufficient to cover performance through the dates available in the table below:

CLIN INCREMENTAL FUNDING SUMMARY

CLIN TOTAL VALUE OBLIGATED DELTA TO FULL FUNDING ESTIMATED FUNDS RUN

OUT DATE

XXXX $ 0.00 $- $ -

XXXX $0.00 $- $ -

XXXX $0.00 $- $ -

XXXX $0.00 $ - $-

XXXX $0.00 $ - $-

TOTALS $ $

Applies to Cost-Plus-Incentive-Fee CLIN(s) only.

SECTION C - DESCRIPTION/SPECS./WORK STATEMENT

SECTION C FA8818-13-R-0021

NOTICE: The following contract clauses pertinent to this section are hereby incorporated in full text:

C002 REFERENCE TO SPECIFIC PARAGRAPHS OF THE STATEMENT OF WORK (MAY 1997)

(TAILORED)

Reference to specific paragraphs of the Performance Work Statement (PWS) indicates only where the CLIN requirement is principally described and does not absolve the Contractor from the requirement to comply with the contractual provisions applicable to those CLINs.

C003 INCORPORATED DOCUMENTS/REQUIREMENTS (AUG 2006) (TAILORED)

(a) The following documents are a part of this contract:

(1) Performance Work Statement, see Attachment 1

(2) DD Form 1423, Contract Data Requirements Lists apply, see Exhibit A

(3) All other documents as identified in Section J

(b) All Measurement Units in all documents presented to the Air Force shall be in Metric format (or as proposed by the contractor).

SECTION D - PACKAGING AND MARKING

SECTION D FA8818-13-R-0021

NO CLAUSES OR PROVISIONS IN THIS SECTION

SECTION E - INSPECTION AND ACCEPTANCE

SECTION E FA8818-13-R-0021

I. NOTICE: The following contract clauses pertinent to this section are hereby incorporated by reference:

A. FEDERAL ACQUISITION REGULATION CONTRACT CLAUSES

52.246-04 INSPECTION OF SERVICES -- FIXED-PRICE (AUG 1996)

52.246-05 INSPECTION OF SERVICES -- COST-REIMBURSEMENT (APR 1984)

B. DEFENSE FEDERAL ACQUISITION REGULATION SUPPLEMENT CONTRACT CLAUSES

252.246-7000 MATERIAL INSPECTION AND RECEIVING REPORT (MAR 2008)

II. NOTICE: The following contract clauses pertinent to this section are hereby incorporated in full text:

E005 INSPECTION AND ACCEPTANCE (MAR 1998) (TAILORED)

The Contractor shall prepare and submit a final DD Form 250, Material Inspection and Receiving Report, on a one-time basis, collectively accounting for all completed items called for under Exhibits A, which called for submission of data or software with a letter of transmittal. The DD Form 250 shall be submitted with the last item required to be delivered.

SECTION F - DELIVERIES OR PERFORMANCE

SECTION F FA8818-13-R-0021

NOTICE: The following contract clauses pertinent to this section are hereby incorporated by reference:

FEDERAL ACQUISITION REGULATION CONTRACT CLAUSES

52.242-15 STOP-WORK ORDER (AUG 1989)

Applies to Firm-Fixed-Price CLIN(s), Fixed-Price Incentive (Firm Target) CLIN(s) only.

52.242-15 STOP-WORK ORDER (AUG 1989) - ALTERNATE I (APR 1984)

Applies to Cost-Plus-Incentive-Fee CLIN(s) only.

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984)

Applies to Firm-Fixed-Price CLIN(s), Fixed-Price Incentive (Firm Target) CLIN(s) only.

52.247-34 F.O.B. DESTINATION (NOV 1991)

52.247-55 F.O.B. POINT FOR DELIVERY OF GOVERNMENT-FURNISHED PROPERTY (JUN

2003)

SECTION G - CONTRACT ADMINISTRATION DATA

SECTION G FA8818-13-R-0021

NOTICE: The following contract clauses pertinent to this section are hereby incorporated in full text:

A. DEFENSE FAR SUPP CONTRACT CLAUSES IN FULL TEXT

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JUN 2012)

(a) Definitions. As used in this clause-

“Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the Central Contractor Registration at https://www.acquisition.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web- Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

TBD.

Note: If a “Combo” document type is identified but not supportable by the Contractor’s business systems, an “Invoice” (stand-alone) and “Receiving Report” (stand-alone) document type may be used instead.)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

TBD

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table* Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC TBD Issue By DoDAAC TBD Admin DoDAAC TBD Inspect By DoDAAC TBD Ship To Code TBD Ship From Code TBD Mark For Code TBD Service Approver (DoDAAC) TBD Service Acceptor (DoDAAC) TBD Accept at Other DoDAAC TBD LPO DoDAAC TBD DCAA Auditor DoDAAC TBD Other DoDAAC(s) TBD

(*Contracting Officer: Insert applicable DoDAAC information or “See schedule” if multiple ship to/acceptance locations apply, or “Not applicable.”)

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the e-mail address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

TBD

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

TBD

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

B. OTHER CONTRACT CLAUSES IN FULL TEXT

G005 PAYMENT INSTRUCTIONS FOR MULTIPLE ACCOUNTING CLASSIFICATION CITATIONS

(MAR 2001) (TAILORED)

Payment for all effort under this contract should be made in the order and amounts shown in the informational subline item(s) in Section B, CLIN(s) 0001 - TBD of the contract and recapped below.

Exhaust the funds in each ACRN before using funds from the next listed ACRN.

ACRN SUBCLIN NO. TOTAL OBLIGATED

TBD TBD TBD

a. This contract will be funded by multiple accounting classification citations. Payment shall be made from ACRNs in alphabetical order (AA,AB,etc). DO NOT USE A PRORATED METHOD to pay, disburse and liquidate funds. Do not liquidate any funds from an ACRN unless the preceding ACRNs have been fully liquidated, or if revised payment instructions are provided per paragraph b. below.

b. Additional ACRNs will be assigned when new accounting classifications are available. When adding new ACRNs or changing existing ACRNs, the above payment instructions shall apply, unless specific revised payments instructions are provided as part of a contract modification.

SECTION H - SPECIAL CONTRACT REQUIREMENTS

SECTION H FA8818-13-R-0021

NOTICE: The following contract clauses pertinent to this section are hereby incorporated in full text:

H001 OPTIONS (MAY 1997) (TAILORED)

The Government reserves the right to exercise the following option(s) subject to the stated conditions:

Options may be exercised at the prenegotiated FPIF cost (CLIN(s) 0002 - 0005) and FFP (CLIN 0006) .

The Contracting Officer may exercise each option by written notice to the Contractor 30 days prior to the period of performance for the applicable option.

0002 - XBM Sustainment Engineering Option I 0003 - XBM Sustainment Engineering Option II 0004 - XBM Sustainment Engineering Option III 0005 - XBM Sustainment Engineering Option IV 0006 - Transition Option

In the event an option is exercised, the affected sections of the contract, e.g., Section B, Section F, Section G, etc., will be modified as appropriate.

H025 INCORPORATION OF SECTION K (OCT 1998)

Section K of the solicitation is hereby incorporated by reference.

H029 IMPLEMENTATION OF DISCLOSURE OF INFORMATION (OCT 1997) (TAILORED)

In order to comply with DFARS 252.204-7000, Disclosure of Information, the following copies of the information to be released are required at least 45 days prior to the scheduled release date:

(a) 1 copy to: Office of Public Affairs, SMC/PA, 483 N. Aviation Blvd., Los Angeles AFB, CA 90245

(b) 1 copy to: Contracting Officer, SMC/PKTS, 3548 Aberdeen Ave SE, Kirtland AFB, NM 87117-5778

(c) 1 copy to: Program Manager, SMC/SDL, Launch Systems Division, 3548 Aberdeen Ave SE, Kirtland AFB NM 87117-5778

H100 ENABLING CLAUSE FOR GOVERNMENT PROGRAM CONTRACTS REQUIRING INTERFACE

WITH AEROSPACE FFRDC CONTRACTSUPPORT (APR 2012)

a. This contract covers part of the Rocket Systems Launch Program which is under the general program management of the Air Force Space and Missile Systems Center (SMC). The Air Force has entered into a contract with The Aerospace Corporation, a California nonprofit corporation operating a Federally Funded Research and Development Center (FFRDC), for the services of a technical group that will support the DoD/U.S. Government program office by performing General Systems Engineering and Integration, Technical Review, and/or Technical Support including informing the commander or director of the various Department of Defense ("DoD") organizations it supports and any U.S. Government program office of product or process defects and other relevant information, which, if not disclosed to the U.S.

Government, could have adverse effects on the reliability and mission success of a U.S. Government program.

1. General Systems Engineering and Integration (GSE&I) deals with overall system definition; integration both within the system and with associated systems; analysis of system segment and subsystem design; design compromises and tradeoffs; definition of interfaces; review of hardware and software, including manufacturing and quality control; observation, review and evaluation of tests and test data; support of launch, flight test, and orbital operations; appraisal of the contractors' technical performance through meetings with contractors and subcontractors, exchange and analysis of information on progress and problems; review of plans for future work; developing solutions to problems; technical alternatives for reduced program risk; providing comments and recommendations in writing to the applicable DoD System Program Manager and/or Project Officer as an independent technical assessment for consideration for modifying the program or redirecting the contractor's efforts; all to the extent necessary to assure timely and economical accomplishment of program objectives consistent with mission requirements.

2. Technical Review (TR) includes the process of appraising the technical performance of the contractor through meetings, exchanging information on progress and problems, reviewing reports, evaluating presentations, reviewing hardware and software, witnessing and evaluating tests, analyzing plans for future work, evaluating efforts relative to contract technical objectives, and providing comments and recommendations in writing to the applicable Air Force Program Manager as an independent technical assessment for consideration for modifying the program or redirecting the contractor's efforts to assure timely and economical accomplishment of program objectives.

3. Technical Support (TS) deals with broad areas of specialized needs of customers for planning, system architecting, research and development, horizontal engineering, or analytical activities for which The Aerospace Corporation is uniquely qualified by virtue of its specially qualified personnel, facilities, or corporate memory. The categories of TS tasks are: Selected Research, Development, Test and Evaluation; Plans and System Architecture; Multi-Program Systems Enhancement; International Technology Assessment; and Acquisition Support.

b. In the performance of this contract, the contractor agrees to cooperate with The Aerospace Corporation by 1) responding to invitations from authorized U. S. Government personnel to attend meetings; 2) by providing access to technical information and research, development planning data such as, but not limited to, design and development analyses, test data and results, equipment and process specifications, test and test equipment specifications and procedures, parts and quality control procedures, records and data, manufacturing and assembly procedures, and schedule and milestone data, all in their original form or reproduced form and including top-level life cycle cost* data, where available; 3) by delivering data as specified in the Contract Data Requirements List; 4) by discussing technical matters relating to this program; 5) by providing access to contractor facilities utilized in the performance of this contract; 6) and by allowing observation of technical activities by appropriate technical personnel of The Aerospace Corporation. The Aerospace Corporation personnel engaged in GSE&I, TR, and/or TS efforts: (i) are authorized access to all such technical information (including proprietary information) pertaining to this contract and may discuss and disclose it to the applicable DoD personnel in a program office; (ii) are authorized to discuss and disclose such technical information (including proprietary information) to the commander or director of the various DoD organizations it supports and any U.S. Government personnel in a program office which, if not disclosed to the U.S.

Government, could have adverse effects on the reliability and mission success of a U.S. Government program; and (iii) Aerospace shall make the technical information (including proprietary information) available only to its Trustees, officers, employees, contract labor, consultants, and attorneys who have a need to know.

c. The contractor further agrees to include in all subcontracts a clause requiring compliance by subcontractor and supplier and succeeding levels of subcontractors and suppliers with the response and access and disclosure provisions of this Enabling Clause, subject to coordination with the contractor, except for subcontracts for commercial items or commercial services. This agreement does not relieve the contractor of its responsibility to manage the subcontracts effectively and efficiently nor is it intended to establish privity of contract between the Government or The Aerospace Corporation and such subcontractors or suppliers, except as indicated in paragraph (d) below.

d. The Aerospace Corporation shall protect the proprietary information of contractors, subcontractors, and suppliers in accordance with the Master Non-disclosure Agreement The Aerospace Corporation entered into with the Air Force, a copy of which is available upon request. This Master Non-disclosure Agreement satisfies the Nondisclosure Agreement requirements set forth in 10 U.S.C. §2320 (f)(2)(B), and provides that such contractors, subcontractors, and suppliers are intended third-party beneficiaries under the Master Non-disclosure Agreement and shall have the full rights to enforce the terms and conditions of the Master Non-disclosure Agreement directly against The Aerospace Corporation, as if they had been signatory party hereto. Each such contractor, subcontractor, or supplier hereby waives any requirement for The Aerospace Corporation to enter into any separate company-to-company confidentiality or other non-disclosure agreements.

e. Aerospace shall make the technical information (including proprietary information) available only to its Trustees, officers, employees, contract labor, consultants, and attorneys who have a need to know, and Aerospace shall maintain between itself and the foregoing binding agreements of general application as may be necessary to fulfill their obligations under the Master Non-disclosure Agreement referred to herein, and Aerospace agrees that it will inform contractors, subcontractors, and suppliers if it plans to use consultants, or contract labor personnel and, upon the request of such contractor, subcontractor, or supplier, to have its consultants and contract labor personnel execute non-disclosure agreements directly therewith.

f. The Aerospace Corporation personnel are not authorized to direct the contractor in any manner. The contractor agrees to accept technical direction as follows:

1. Technical direction under this contract will be given to the contractor solely by SMC.

2. Whenever it becomes necessary to modify the contract and redirect the effort, a change order signed by the Contracting Officer or a Supplemental Agreement signed by both the Contracting Officer and the contractor will be issued.

* Cost data is defined as information associated with the programmatic elements of life cycle (concept, development, production, operations, and retirement) of the system/program. As defined, cost data differs from "financial" data, which is defined as information associated with the internal workings of a company or contractor that is not specific to a project or program.

(End of Clause)

H101 ASSOCIATE CONTRACTOR AGREEMENTS (JAN 2013)

(a) The Contractor shall enter into Associate Contractor Agreements (ACA) for any portion of the contract requiring joint participation in the accomplishment of the Government's requirement. The agreements shall include the basis for sharing information, data, technical knowledge, expertise, and/or resources essential to the integration of the Launch Vehicle Mission Assurance for E-LRALT (Tail 1 and

2) and PAP (MCS and LCS) which shall ensure the greatest degree of cooperation for the development of the program to meet the terms of this task order. Associate Contractors are listed in (h) below.

(b) ACAs shall include the following general information:

(1) Identify the associate contractors and their relationships.

(2) Identify the program involved and the relevant Government contracts of the associate Contractors.

(3) Describe the associate contractor interfaces by general subject matter.

(4) Specify the categories of information to be exchanged or support to be provided.

(5) Include the expiration date (or event) of the ACA.

(6) Identify potential conflicts between relevant Government contracts and the ACA;

include agreements on protection of proprietary data and restrictions on employees.

(c) A copy of such agreement shall be provided to the Contracting Officer for review before execution of the document by the cooperating contractors.

(d) Nothing in the foregoing shall affect compliance with the requirements of the clause at 5352.209-9000, Organizational Conflict of Interest and ALTERNATES I, II, III, and VI.

(e) The Contractor is not relieved of any contract requirements or entitled to any adjustments to the contract terms because of a failure to resolve a disagreement with an associate contractor.

(f) Liability for the improper disclosure of any proprietary data contained in or referenced by any agreement shall rest with the parties to the agreement, and not the Government.

(g) All costs associated with the agreements are included in the negotiated cost of this contract.

Agreements may be amended as required by the Government during the performance of this contract.

(h) The following contractors are associate contractors with whom agreements are required:

CONTRACTOR NAME /ADDRESS PROGRAM/CONTRACT

AEROJET GENERAL CORPORATION FA8818-09-D-0024

HWY 50 & AEROJET RD.

RANCHO CORDOVA CA 95670-0000

AERO THERMO TECHNOLOGY FA8818-09-F-0025

620 DISCOVERY DR . N.W. SUITE 100

HUNTSVILLE, AL 35806-2816

ATK LAUNCH SYSTEMS INC FA8818-06-D-0021

ATK LAUNCH SYSTEMS

9160 N HWY 83

CORINNE UT 84307-0000

L-3 COMMUNICATIONS CORPORATION FA8818-08-D-0038

COLEMAN AEROSPACE

7675 MUNICIPAL DR

ORLANDO FL 32819-8930

LOCKHEED MARTIN CORPORATION FA8818-13-D-0002

SPACE SYSTEMS COMPANY

12257 S. WADSWORTH BLVD

LITTLETON, CO 80125-8504

LOCKHEED MARTIN CORPORATION HQ0006-04-D-0006 (TOs 022, 027)

SPACE SYSTEMS COMPANY

4800 BRADFORD DRIVE N.W.

HUNTSVILLE AL 35805-1930

ORBITAL SCIENCES CORPORATION FA8818-08-D-0036

LAUNCH SYSTEMS GROUP FA8818-13-D-0004

3380 S PRICE RD

CHANDLER AZ 85248-3534

SPACE EXPLORATION TECHNOLOGIES CORP FA8818-13-D-0003

SPACEEX

1 ROCKET ROAD

HAWTHORNE, CA 90250-6844

TECOLOTE RESEARCH, INC. FA8802-12-F-1041

420 S. FAIRVIEW AVE. SUITE 201

GOLETA, CA 93117-3626

Others to be specified as required.

SD/PKT-H002 BASE SUPPORT (TAILORED) (JUL 2012)

Whether this contract is a cost, cost-reimbursement, time-and-materials, or labor hour contract, the Contractor agrees that, in the performance of this contract or any major subcontract, no direct or indirect costs for office furniture, equipment, furnishings, facilities or any other fixed assets related to facilities provided to Contractor personnel during the performance of this contract will be incurred if the Government determines that such property is available at, or through any Air Force installation where this contract shall be performed. Only the prior written approval of the Contracting Officer can relieve the Contractor from this restriction. Nothing in this special provision is meant to affect a contractor's approved rate structure.

The Base Support Agreement is attached herein Section J, Attachment 3

SD/PKT-H003 TECHNICAL SERVICES APPLICABLE TO CLIN SERIES 1000, 2000, AND 3000 (JAN 2013)

a. The Government shall have the right to acquire technical services in the categories of Launch Service Independent Verification & Validation (IV&V) or Special Studies for a five (5) year period with all performance to be completed no later than (NLT) seven (7) years from contract award and may unilaterally increase the total missions authorized per contract year (CY) by up to 150%.

CY1

Technical Service Category Authorized 150% Surge IV&V (1000 - 2000 CLIN Series) 5 missions 7 missions Special Studies (3000 CLIN Series) 20,000 hrs none

CY2

Technical Service Category Authorized 150% Surge IV&V (1000 - 2000 CLIN Series) 5 missions 7 missions Special Studies (3000 CLIN Series) 20,000 hrs none

CY3

Technical Service Category Authorized 150% Surge IV&V (1000 - 2000 CLIN Series) 5 missions 7 missions Special Studies (3000 CLIN Series) 20,000 hrs none

CY4

Technical Service Category Authorized 150% Surge IV&V (1000 - 2000 CLIN Series) 5 missions 7 missions Special Studies (3000 CLIN Series) 20,000 hrs none

CY5

Technical Service Category Authorized 150% Surge IV&V (1000 - 2000 CLIN Series) 5 missions 7 missions Special Studies (3000 CLIN Series) 20,000 hrs none

b. Prior to the issuance of a technical services requirement in any of the technical services categories, the Contracting Officer shall issue in writing a Request for Proposal (RFP) seeking the hours and costs for the contemplated task. The contractor shall submit the proposal to the Contracting Officer within 15 calendar days after receipt of the RFP and shall be priced in accordance with the prenegotiated labor and wrap rates provided at attachments ___ and ___ of the contract. For IV&V requirements issued, the RFP shall also state the type of proposal being requested, FPIF or CPIF. For these efforts, the estimated target cost and target fee shall be proposed based upon the CY in which the efforts are expected to be performed at the time the work is authorized. All other technical services (Special Studies) are FFP only.

In addition to labor costs, if required, Other Direct Costs are considered allowable costs and shall be proposed for negotiation into the target cost or firm fixed price of the CLIN authorizing the effort.

c. The Government's authorization of these requirements shall be evidenced by the Contracting Officer's issuance of a bilateral modification adding a CLIN to the respective CLIN series in Section B. Such modification(s) shall:

1. Make appropriate change to Sections B, F, G, H and J of this contract.

2. Establish a period of performance for the requirement.

3. Establish the CLIN price.

i. In the case of a CPIF effort under the 1000 CLIN series for IV&V, the modification shall establish the target cost, target fee, minimum fee, maximum fee, and share ratios.

ii. In the case of an FPIF effort under the 2000 CLIN series for IV&V, the modification shall establish the target cost, target fee, ceiling price, and share ratios.

iii. In the case of a FFP effort under the 3000 CLIN series for Special Studies, the modification shall establish the firm fixed price and number of hours negotiated.

d. The target, minimum, and maximum fee percentages, along with the share ratios for all IV&V CPIF 1000 Series CLINs have been negotiated at the rates below and shall be used in establishing all CPIF 1000 Series CLINs:

Target Fee %: TBD @ time of award Minimum Fee: 3% Maximum Fee: 12% Overrun Share Ratio: 60/40 Underrun Share Ratio: 60/40

e. The target fee percentage, ceiling price percentage and share ratios for all IV&V FPIF 2000 Series CLINs has been negotiated at the rates below and shall be used in establishing all FPIF 2000 Series CLINs:

Target Fee %: TBD @ time of award Ceiling Price %: 120% Overrun Share Ratio: 40/60 Underrun Share Ratio: 60/40

f. A CLIN under the appropriate technical services CLIN series will be established for each technical services requirement authorized pursuant to this clause.

(End Clause)

SD/PKT-H004 INTENT TO INCORPORATE CONTRACTOR'S PROPOSAL STRENGTHS (JAN 2013)

Strengths will be incorporated into Section J of the resultant contract at no additional cost to the Government.

SD/PKT-H005 KEY POSITIONS AND MINIMUM QUALIFICATIONS (FEB 2013)

(a) Contractor personnel holding the position titles and having the qualifications listed below are considered essential to the work being performed under this contract:

Key Positions Minimum Qualification

The offeror shall list by job title The offeror shall list minimum experience qualifications in terms of education and/or experience

(b) The Contractor shall notify the Contracting Officer before the departure of any individual in a key position and identify the proposed substitution. Any proposed personnel substitution that does not meet the minimum qualification requirements described above requires the prior written approval of the Contracting Officer.

PART II - CONTRACT CLAUSES

SECTION I - CONTRACT CLAUSES

SECTION I FA8818-13-R-0021

Contract Clauses in this section are from the FAR, Defense FAR Sup, Air Force FAR Sup, and the Air Force Materiel Command FAR Sup, and are current through the following updates:

Database_Version: 6.14.x.300; Issued: 3/15/2013; FAR: FAC 2005-66 (Partial); DFAR: DPN 20130228;

DL.: DL 98-021; Class Deviations: CD 2013-O0007; AFFAR: 2002 Edition; AFAC: AFAC 2012-0330; IPN: 98-

I. NOTICE: The following contract clauses pertinent to this section are hereby incorporated by reference:

A. FEDERAL ACQUISITION REGULATION CONTRACT CLAUSES

52.202-01 DEFINITIONS (JAN 2012)

52.203-03 GRATUITIES (APR 1984)

52.203-05 COVENANT AGAINST CONTINGENT FEES (APR 1984)

52.203-06 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT (SEP 2006)

52.203-07 ANTI-KICKBACK PROCEDURES (OCT 2010)

52.203-08 CANCELLATION, RESCISSION, AND RECOVERY OF FUNDS FOR ILLEGAL OR

IMPROPER ACTIVITY (JAN 1997)

52.203-10 PRICE OR FEE ADJUSTMENT FOR ILLEGAL OR IMPROPER ACTIVITY (JAN 1997)

52.203-12 LIMITATION ON PAYMENTS TO INFLUENCE CERTAIN FEDERAL TRANSACTIONS

(OCT 2010)

52.203-13 CONTRACTOR CODE OF BUSINESS ETHICS AND CONDUCT (APR 2010)

52.203-15 WHISTLEBLOWER PROTECTIONS UNDER THE AMERICAN RECOVERY AND

REINVESTMENT ACT OF 2009 (JUN 2010)

52.203-16 PREVENTING PERSONAL CONFLICTS OF INTEREST (DEC 2011)

52.204-02 SECURITY REQUIREMENTS (AUG 1996)

52.204-04 PRINTED OR COPIED DOUBLE-SIDED ON POSTCONSUMER FIBER CONTENT

PAPER (MAY 2011)

52.204-09 PERSONAL IDENTITY VERIFICATION OF CONTRACTOR PERSONNEL (JAN 2011)

52.204-10 REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT

AWARDS (AUG 2012)

52.204-99 SYSTEM FOR AWARD MANAGEMENT REGISTRATION (DEVIATION) (AUG 2012)

52.209-06 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH

CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT

(DEC 2010)

52.209-09 UPDATES OF PUBLICLY AVAILABLE INFORMATION REGARDING RESPONSIBILITY

MATTERS (FEB 2012)

52.209-10 PROHIBITION ON CONTRACTING WITH INVERTED DOMESTIC CORPORATIONS

(MAY 2012)

52.210-01 MARKET RESEARCH (APR 2011)

52.215-02 AUDIT AND RECORDS -- NEGOTIATION (OCT 2010)

52.215-08 ORDER OF PRECEDENCE--UNIFORM CONTRACT FORMAT (OCT 1997)

52.215-10 PRICE REDUCTION FOR DEFECTIVE CERTIFIED COST OR PRICING DATA (AUG

2011)

52.215-12 SUBCONTRACTOR CERTIFIED COST OR PRICING DATA (OCT 2010)

52.215-14 INTEGRITY OF UNIT PRICES (OCT 2010) - ALTERNATE I (OCT 1997)

52.215-15 PENSION ADJUSTMENTS AND ASSET REVERSIONS (OCT 2010)

52.215-17 WAIVER OF FACILITIES CAPITAL COST OF MONEY (OCT 1997)

52.215-18 REVERSION OR ADJUSTMENT OF PLANS FOR POSTRETIREMENT BENEFITS

(PRB) OTHER THAN PENSIONS (JUL 2005)

52.215-19 NOTIFICATION OF OWNERSHIP CHANGES (OCT 1997)

52.215-21 REQUIREMENTS FOR CERTIFIED COST OR PRICING DATA AND DATA OTHER

THAN CERTIFIED COST OR PRICING DATA--MODIFICATIONS (OCT 2010)

52.215-23 LIMITATIONS ON PASS-THROUGH CHARGES (OCT 2009)

Applies to Cost-Plus-Incentive-Fee CLIN(s) only.

52.216-07 ALLOWABLE COST AND PAYMENT (JUN 2011)

Applies to Cost-Plus-Incentive-Fee CLIN(s) only.

52.216-16 INCENTIVE PRICE REVISION -- FIRM TARGET (OCT 1997)

Para (a), Line Item numbers: 'CLIN 0001, Option CLINs 0002-0005 and CLIN 2000

Series CLIN(s)' Para (a), In no event shall the total final price of these items exceed the ceiling price of:

'$TBN'

Para (c)(1), Number of days: 'FPIF and CPIF: TBD' Para (d)(2)(ii), Percent: 'FPIF 60 and CPIF 60' Para (d)(2)(iii), Percent: 'FPIF 40 and CPIF 40' Applies to Fixed-Price Incentive (Firm Target) CLIN(s) only.

52.219-04 NOTICE OF PRICE EVALUATION PREFERENCE FOR HUBZONE SMALL BUSINESS

CONCERNS (JAN 2011)

52.219-06 NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (NOV 2011)

52.219-08 UTILIZATION OF SMALL BUSINESS CONCERNS (JAN 2011)

52.219-09 SMALL BUSINESS SUBCONTRACTING PLAN (JAN 2011) - ALTERNATE II (OCT

2001)

52.219-16 LIQUIDATED DAMAGES -- SUBCONTRACTING PLAN (JAN 1999)

52.219-28 POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (APR 2012)

52.222-01 NOTICE TO THE GOVERNMENT OF LABOR DISPUTES (FEB 1997)

52.222-03 CONVICT LABOR (JUN 2003)

52.222-21 PROHIBITION OF SEGREGATED FACILITIES (FEB 1999)

52.222-26 EQUAL OPPORTUNITY (MAR 2007)

52.222-35 EQUAL OPPORTUNITY FOR VETERANS (SEP 2010)

52.222-36 AFFIRMATIVE ACTION FOR WORKERS WITH DISABILITIES (OCT 2010)

52.222-37 EMPLOYMENT REPORTS ON VETERANS (SEP 2010)

52.222-40 NOTIFICATION OF EMPLOYEE RIGHTS UNDER THE NATIONAL LABOR RELATIONS

ACT (DEC 2010)

52.222-50 COMBATING TRAFFICKING IN PERSONS (FEB 2009)

52.222-54 EMPLOYMENT ELIGIBILITY VERIFICATION (JUL 2012)

52.223-02 AFFIRMATIVE PROCUREMENT OF BIOBASED PRODUCTS UNDER SERVICE AND

CONSTRUCTION CONTRACTS (JUL 2012)

Para (d). CO adds info for Environmental POC. 'TBD'

52.223-05 POLLUTION PREVENTION AND RIGHT-TO-KNOW INFORMATION (MAY 2011)

52.223-05 POLLUTION PREVENTION AND RIGHT-TO-KNOW INFORMATION (MAY 2011) -

ALTERNATE I (MAY 2011)

52.223-05 POLLUTION…