6.a-L102_Appendix_A__-_MID_SM-3.7_v5_4_Feb_2013.docx

UNCLASSIFIED// SM-3.7

UNCLASSIFIED

Sample Mission 3.7 eMRBM New Launch System Mission Information Document (MID)

FA8818-13-R-TBD

Draft v5 4 Feb 2013

REVISION HISTORY

INTRODUCTION

OVERVIEW

This Mission Information Document (MID) provides the mission assurance requirements for a “Construct 2” eMRBM target system procured by the Missile Defense Agency (MDA). The US Air Force, Space and Missile Systems Center (SMC) Rocket Systems Launch Program (RSLP) office, Space Development and Test Directorate (SD)/Launch Systems Division (SDL), will provide the motors for the SM-3.7 mission. MDA is responsible for mission and Launch Vehicle (LV) integration activities.

The baseline launch location for this mission is TBD.

The target payload for this mission is CLASSIFIED.

0. PURPOSE

The purpose of this document is to provide mission-specific information for the SM-3.7 mission assurance effort by identifying the Launch Service Mission Assurance (LSMA) contract Performance Work Statement scope specific to this mission, and to provide schedule and other mission information required in order to propose and execute Independent Verification and Validation (IV&V) Construct 2 activities. This MID will:

a. Identify RSLP mission objectives.

b. Identify roles and responsibilities and interfaces of which the mission assurance contractor (MAC) should be aware among the various contractors and Government agencies supporting the mission.

c. Identify the baseline mission execution schedule milestones.

d. Identify any mission-unique launch activities.

MISSION OBJECTIVES

The primary goal of RSLP’s support to the SM-3.7 mission is to support the launch an eMRBM target missile to meet MDA test requirements by providing certified processed motors to MDA and ensuring motor safety/certification through MDA processing and launch activities.

ROLES AND RESPONSIBILITIES

The roles and responsibilities among agencies and contractors that will support the SM-3.7 mission are described below.

Customer:

The MDA Targets and Countermeasures Program, located in Huntsville Alabama, has a liaison at Kirtland AFB, New Mexico for motor processing. MDA identifies motor requirements and provides funding to support motor processing and system engineering. MDA technical support contractor is Aerospace Corporation.

GFE Motor Provider:

SMC/SD, located at Kirtland AFB, NM, is responsible for providing flightworthy motors for the mission in accordance with Construct 2 of the Memorandum of Agreement between SMC and MDA. Within SMC/SD, SDL is the division for Research and Development (R&D) and Space launch missions and is responsible for motor processing, safety, and certification. SDL has a operating location at Hill AFB, Utah where the motors are processed.

Mission Assurance Contractor (MAC):

The MAC provides Independent Verification and Validation Construct 2 support to SMC/SD in accordance with this MARD.

Launch Services Contractor (LSC):

MDA has contracted with Lockheed Martin Space Systems Corporation (LMSSC) to provide the target design, integration, vehicle mating, mission planning and launch of the target.

Agreements The MAC shall ensure that Associate Contractor Agreements are completed for the following associate contractors:

· LMSSC

· Tecolote Research, Inc

· Aero Thermo Technology, Inc

· Aerospace Corp.

· TASC

If necessary, the MAC shall also ensure that Non-Disclosure Agreements are completed for the above contractors.

MISSION MILESTONE SCHEDULE

The following schedule is provided for MAC proposal and planning purposes. The first two eMRBM targets are supported under a prior contract, not within the scope of this MID.

Prior/Current events not covered by this MID:

Events covered by this MID:

MISSION ASSURANCE REQUIREMENTS

LSMA PWS MA Requirements The MAC shall provide Construct 2 support (PWS 3.3.7) and GFE Flight Motor Processing (PWS 3.2.5) to one eMRBM missions.

The MAC shall provide GFE Ground Test Motor Processing (PWS 3.2.6) for LSC flight hardware verification testing.

For planning and pricing purposes, the following activity is planned to continue relevant to the eMRBM GFP motors:

· Weekly GFI/GFX telecon

· Bi-weekly motor processing telecon

· Two motor processing TIMs for each mission

· Four weeks observe on-site LSC motor activities

· Two weeks observe launch site motor activities

· Two launch rehearsals and two launch attempts

The Period of Performance of this effort is estimated to be Jan 2014 thru Apr 2015.

REFERENCES

The following documents are included by reference for additional requirement details as specified herein.

LSMA Performance Work Statement, dd mmm yyyy.

eMRBM Contract PWS, dd mmm yyyy.

1 | UNCLASSIFIED// NOT FOR PUBLIC RELEASE

LSMA SM-3.7 – Rev 0 Page 6 of 6