FA8773-09-R-0001 RFP
984 KB Posted
- Solicitation number
- FA8773-09-R-0001
About this file
FA8773-09-R-0001 Request for Proposal (RFP) Joint Base McGuire-Dix-Lakehurst (JBMDL)
Text of this file
CODE
(Hour)
PAGE(S)
until 03:00 PM local t ime 17 Jul 2009
A X B
C X D
EX
X
G F 119 - 130
131 - 150 X H 151 - 158 pamela.mcgowen@tinker.af.mil
RATING PAGE OF PAGES
7. ISSUED BY
(Date)
IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.
Previous Edition is Unusable 33-134 STANDARD FORM 33 (REV. 9-97)
Prescribed by GSA FAR (48 CFR) 53.214(c)
1 158
(If other than Item 7)
15A. NAME 16. NAME AND TITLE OF PERSON AUTHORIZED TO
AND
ADDRESS SIGN OFFER (Type or print)
OF
OFFEROR
AMENDMENT NO. DATE
15B. TELEPHONE NO (Include area code) 17. SIGNATURE15C. CHECK IF REMITTANCE ADDRESS
IS DIFFERENT FROM ABOVE - ENTER
SUCH ADDRESS IN SCHEDULE.
18. OFFER DATE
1. THIS CONTRACT IS A RATED ORDER
UNDER DPAS (15 CFR 700)
2. CONTRACT NO.
FA8773 8. ADDRESS OFFER TO
See Item 7
9. Sealed offers in original and 7 copies for furnishing the supplies or services in the Schedule will be received at the place specified in Item 8, or if handcarried, in the depository located in
CAUTION - LATE Submissions, Modifications, and Withdrawals: See Section L, Provision No. 52.214-7 or 52.215-1. All offers are subject to all terms and
See Block 7 conditions contained in this solicitation.
10. FOR INFORMATION
CALL:
A. NAME (NO COLLECT CALLS)
PAMELA G. MCGOWEN 405-734-9705
11. TABLE OF CONTENTS
SOLICITATION/ CONTRACT FORM
SUPPLIES OR SERVICES AND PRICES/ COSTS
1 - 2 3 - 55
X I CONTRACT CLAUSES
DESCRIPTION/ SPECS./ WORK STATEMENT X
PACKAGING AND MARKING 56
J LIST OF ATTACHMENTS
INSPECTION AND ACCEPTANCE
DELIVERIES OR PERFORMANCE
57 - 62
63 - 70 X K REPRESENTATIONS, CERTIFICATIONS AND
OTHER STATEMENTS OF OFFERORS
CONTRACT ADMINISTRATION DATA X
SPECIAL CONTRACT REQUIREMENTS
OFFER (Must be fully completed by offeror) 71 X M
L INSTRS., CONDS., AND NOTICES TO OFFERORS
EVALUATION FACTORS FOR AWARD
NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.
is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.
13. DISCOUNT FOR PROMPT PAYMENT
(See Section I, Clause No. 52.232-8)
14. ACKNOWLEDGMENT OF AMENDMENTS
(The offeror acknowledges receipt of amendments
AMENDMENT NO. DATE
to the SOLICITATION for offerors and related documents numbered and dated):
FACILITY
12. In compliance with the above, the undersigned agrees, if this offer is accepted within calendar days (60 calendar days unless a different period
SOLICITATION, OFFER AND AWARD
X
(X) SEC. DESCRIPTION (X) SEC. DESCRIPTION PAGE(S)
PART I - THE SCHEDULE
26. NAME OF CONTRACTING OFFICER (Type or print) 27. UNITED STATES OF AMERICA 28. AWARD DATE
EMAIL:TEL: (Signature of Contracting Officer)
CODE CODE
B. TELEPHONE (Include area code) C. E-MAIL ADDRESS
AWARD (To be completed by Government)
19. ACCEPTED AS TO ITEMS NUMBERED 20. AMOUNT 21. ACCOUNTING AND APPROPRIATION
22. AUTHORITY FOR USING OTHER THAN FULL AND OPEN COMPETITION:
10 U.S.C. 2304(c)( ) 41 U.S.C. 253(c)( ) (4 copies unless otherwise specified)
23. SUBMIT INVOICES TO ADDRESS SHOWN IN ITEM
24. ADMINISTERED BY (If other than Item 7) CODE 25. PAYMENT WILL BE MADE BY CODE
PART IV - REPRESENTATIO NS AND INSTRUCTIO NS
PART III - LIST O F DO CUMENTS, EXHIBITS AND O THER ATTACHMENTS
72 - 117
PART II - CO NTRACT CLAUSES
38 EIG/PK - FA8773
PAMELA MCGOWEN
4079 HILLTOP RD
TINKER AFB OK 73145-2713 405-734-9705
405-734-9220FAX:
TEL:
FAX:
TEL:
NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".
SOLICITATION
6. REQUISITION/PURCHASE NO.5. DATE ISSUED
17 Jun 2009
4. TYPE OF SOLICITATION
SEALED BID (IFB)
NEGOTIATED (RFP)
[ X ]
3. SOLICITATION NO.
FA8773-09-R-0001
Section A - Solicitation/Contract Form
SF 33 STATEMENTS
A-1 Page numbering. Due to a known error with the contract writing system used to assemble this document, the “total number of pages” indicated on the SF 33 may be incorrect.
A-2 NAICS Code The NAICS is 517110. Size Standard: 1500 Employees
A-3 Proposal Acceptance Period The acceptance period in Block 12 must be 120 days or more. An amount less, may cause your offer not to be accepted.
A-4 Set Aside This Acquisition is ( ) Unrestricted ( ) Set Aside 100 % for eligible 8(a) Firms.
( ) Small Business ( ) Labor Surplus Area Concerns ( ) Combined Small Business & Labor Surplus Concerns ( ) Other
A-5 Foreign participation is not permitted at any level (prime or sub-contractor) for this contract.
Section B - Supplies or Services and Prices
ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT
0001 Months Operation & Maintenance (O&M), McGuire
FFP
Services non-personal: The contractor shall furnish all labor, tools, parts and incidentals necessary to provide operation and maintenance (O&M) for the Base Telecommunication System (BTS) at McGuire AFB NJ in accordance with (IAW) contract terms and conditions.
FOB: Destination
NSN: D316-38-PKL-NMMI
SIGNAL CODE: A
NET AMT
0001AA 12 Months O&M, McGuire AFB NJ, BTS
FFP
O&M for the Base Telecommunication System (BTS) IAW contract terms and conditions.
FOB: Destination
NSN: D316-38-PKL-NMMP
0001AB 12 Months O&M, Hospital, McGuire AFB NJ, BTS
FFP
O&M for the Base Telecommunication System (BTS) IAW contract terms and conditions.
FOB: Destination
0001AC 999 Months McGuire AFB, Additional Funding, O&M
FFP
Additional Funding for O&M of the systems identified in the PWS (BTS)IAW contract terms and conditions.
FOB: Destination
NSN: D316-38-PKL-NMMA
0002 Months O&M at Ft Dix NJ
FFP
Services non-personal: The contractor shall furnish all labor, tools, parts and incidentals necessary to provide operation and maintenance (O&M) for the Base Telecommunication System (BTS) at Ft Dix NJ in accordance with (IAW) contract terms and conditions.
FOB: Destination
0002AA 12 Months O&M, Ft Dix NJ, BTS
FFP
O&M for the Base Telecommunication System (BTS) IAW contract terms and conditions.
FOB: Destination
0002AB 999 Months Ft Dix NJ, Additional Funding, O&M
FFP
Additional Funding for O&M of the systems identified in the PWS (BTS)IAW contract terms and conditions.
FOB: Destination
0003 Months O&M at Lakehurst NAES, NJ
FFP
Services non-personal: The contractor shall furnish all labor, tools, parts and incidentals necessary to provide operation and maintenance (O&M) for the Base Telecommunication System (BTS) at Lakehurst NAES, NJ in accordance with (IAW) contract terms and conditions.
FOB: Destination
0003AA 12 Months O&M, Lakehurst NAES, NJ, BTS
FFP
O&M for the Base Telecommunication System (BTS) IAW contract terms and conditions.
FOB: Destination
0003AB 999 Months Lakehurst NAES, Additional Funding, O&M
FFP
Additional Funding for O&M of the systems identified in the PWS (BTS) IAW contract terms and conditions.
FOB: Destination
0004 1 Lump Sum Purchase
FFP
Contractor shall purchase pre-priced material items (and applicable mounting hardware) identified by Product Identification (PID) number and "A" on Attachment 1, Pricing Table for work orders in accordance with the terms of this contract. See also the attached EIPS. Purchase prices include expenses associated with maintenance requirements described in the PWS for the remainder of the contract (including any exercised options). Contractor shall use pre-priced (PID) items to the maximum extent. See CLIN X010 for subcontracting effort.
FOB: Destination
NSN: D316-38-PKL-NPRC
0005 1 Lump Sum Installation
FFP
Contractor shall provide all labor, tools, parts and incidentals necessary to provide installation or services identified by PID number and "B" on attachment 1, Pricing Table to accomplish work orders in accordance with the terms of this contract.
Installation prices shall include operation & maintenance expenses associated with requirements in Section 1 of the PWS for the remainder of the contract (including any exercised options). See also the attached EIPS.
Certain aspects of this work may be subject to the Davis Bacon Act (DBA).
Individual work orders subject to the DBA shall be annotated by the contractor IAW the PWS. PID item pricing reflects the appropriate labor law applicable to the specified effort. Contractor shall use pre-priced (PID) items to the maximum extent. See CLIN X010 for subcontracting effort.
FOB: Destination
NSN: D316-38-PKL-NINS
0006 1 Lump Sum Removal
FFP
Contractor shall provide all labor, tools, parts and incidentals necessary to provide removal of items identified by PID number and "C" on Attachment 1, Pricing Table to accomplish work orders in accordance with the terms of this contract. See also the attached EIPS.
Certain aspects of this work may be subject to the Davis Bacon Act (DBA).
Individual work orders subject to the DBA shall be annotated by the contractor IAW the PWS. PID item pricing reflects the appropriate labor law applicable to the specified effort.Contractor shall use pre-priced (PID) items to the maximum extent.
FOB: Destination
NSN: D316-38-PKL-NREM
0007 1 Lump Sum Relocate
FFP
Contractor shall provide all labor, tools, parts and incidentals necessary to provide relocation of items identified by PID number and "D" on Attachment 1, Pricing Table to accomplish work orders in accordance with the terms of this contract. See also the attached EIPS. Contractor shall use pre-priced (PID) items to the maximum extent.
FOB: Destination
NSN: D316-38-PKL-NREL
0008 1 Lump Sum Global Positioning System (GPS)
FFP
The contractor shall provide all labor, tools, parts and incidentals necessary to accomplish Data Collection Service in accordance with the terms of the contract (including but not limited to PWS Attachment 5.8). See also Attachment 1, Pricing Table for individual prices.
Due to a PD2 Contract Writing system limitation, it is not possible to properly show delivery lines for this CLIN. Note that while the delivery schedule will show "N/A" delivery will be made to McGuire AFB, Fort Dix, or Lakehurst NAES, NJ as specified on individual work orders issued hereunder.
FOB: Destination
NSN: D316-38-PKL-NGPS
0009 1 Lump Sum Labor Hours
FFP
The contractor shall provide all labor necessary to accomplish work orders in accordance with the terms of this contract. See also FAR 52.232-7. This CLIN shall only be used when there is no pre-priced item (PID) established within Attachment 1, Pricing Table to perform the work.
FOB: Destination
NSN: D316-38-PKL-NLHR
0010 1 Lump Sum Material
FFP
The contractor shall furnish all materials, parts, and incidentals necessary to accomplish work orders in accordance with the terms of this contract. See also FAR 52.232-7. This CLIN shall only be used when there is no pre-priced item (PID) established within Attachment 1, Pricing Table to purchase the material.
This CLIN shall also be used when subcontractor(s) accomplishes the work.
Prepriced CLIN/SLIN/PID(s) shall be used regardless of who performs the work.
Separation of prepriced items from non-priced items is required, even when an entire job is subcontracted. See also the attached EIPS.
Material factor submitted with proposal is a "mixed rate" and includes all costs/profit to provide the material to the destination.
FOB: Destination
NSN: D316-38-PKL-NMAT
0011 Lump Sum Funding for Work Orders, JB MDL
FFP
This CLIN provides funding for work orders accomplished using CLINs/SLINs X004 through X010, and X011AA on individual task or work order(s) at the Joint Base McGuire-Dix-Lakehurst (JB MDL). The contractor shall use this CLIN and/or it's associated SLINs (as applicable) to invoice monthly for completed work orders IAW the terms of the contract.
FOB: Destination
NSN: D316-38-PKL-NWOI
0011AA 999 Lump Sum Funding for Work Orders
FFP
Joint Base McGuire-Dix-Lakehurst. This CLIN provides funding for work orders accomplished using CLINs/SLINs X004 through X010, and X012 specified on individual task or work order(s).
FOB: Destination
NSN: D316-38-PKL-NWOF
Other Services, Joint Base MDL
FFP
Services non-personal. The Contractor shall perform the services listed in the SLINs below IAW the terms and conditions of the contract at the Joint Base McGuire-Dix-Lakehurst (MDL). The services/prices specified within these SLINs are not included within the O&M price(s) listed in CLIN x001.
FOB: Destination
NSN: D316-38-PKL-NOSV
0012AA 100,000 Foot Additional Cable Marking & Locating
FFP
Joint Base McGuire-Dix-Lakehurst NJ. The Contractor shall conduct additional cable marking and locating services (above the quantities specified in PWS Section 1.3) IAW the terms and conditions of the contract. See also PWS Sections 1.3 & 1.4.
FOB: Destination
NSN: D316-38-PKL-NOSM
1001 Months OPTION Operation & Maintenance (O&M), McGuire
FFP
Services non-personal: The contractor shall furnish all labor, tools, parts and incidentals necessary to provide operation and maintenance (O&M) for the Base Telecommunication System (BTS) at McGuire AFB NJ in accordance with (IAW) contract terms and conditions.
FOB: Destination
1001AA 12 Months OPTION O&M, McGuire AFB NJ, BTS
FFP
O&M for the Base Telecommunication System (BTS) IAW contract terms and conditions.
FOB: Destination
1001AB 12 Months OPTION O&M, Hospital, McGuire AFB NJ, BTS
FFP
O&M for the Base Telecommunication System (BTS) IAW contract terms and conditions.
FOB: Destination
1001AC 999 Months OPTION McGuire AFB, Additional Funding, O&M
FFP
Additional Funding for O&M of the systems identified in the PWS (BTS) IAW contract terms and conditions.
FOB: Destination
1002 Months OPTION O&M at Ft Dix NJ
FFP
Services non-personal: The contractor shall furnish all labor, tools, parts and incidentals necessary to provide operation and maintenance (O&M) for the Base Telecommunication System (BTS) at Ft Dix NJ in accordance with (IAW) contract terms and conditions.
FOB: Destination
1002AA 12 Months OPTION O&M, Ft Dix NJ, BTS
FFP
O&M for the Base Telecommunication System (BTS) IAW contract terms and conditions.
FOB: Destination
1002AB 999 Months OPTION Ft Dix NJ, Additional Funding, O&M
FFP
Additional Funding for O&M of the systems identified in the PWS (BTS)IAW contract terms and conditions.
FOB: Destination
1003 Months OPTION O&M at Lakehurst NAES, NJ
FFP
Services non-personal: The contractor shall furnish all labor, tools, parts and incidentals necessary to provide operation and maintenance (O&M) for the Base Telecommunication System (BTS) at Lakehurst NAES, NJ in accordance with (IAW) contract terms and conditions.
FOB: Destination
1003AA 12 Months OPTION O&M, Lakehurst NAES, NJ, BTS
FFP
O&M for the Base Telecommunication System (BTS) IAW contract terms and conditions.
FOB: Destination
1003AB 999 Months OPTION Lakehurst NAES, Additional Funding, O&M
FFP
Additional Funding for O&M of the systems identified in the PWS (BTS) IAW contract terms and conditions.
FOB: Destination
1004 1 Lump Sum OPTION Purchase
FFP
Contractor shall purchase pre-priced material items (and applicable mounting hardware) identified by Product Identification (PID) number and "A" on Attachment 1, Pricing Table for work orders in accordance with the terms of this contract. See also the attached EIPS. Purchase prices include expenses associated with maintenance requirements described in the PWS for the remainder of the contract (including any exercised options). Contractor shall use pre-priced (PID) items to the maximum extent. See CLIN X010 for subcontracting effort.
FOB: Destination
1005 1 Lump Sum OPTION Installation
FFP
Contractor shall provide all labor, tools, parts and incidentals necessary to provide installation or services identified by PID number and "B" on attachment 1, Pricing Table to accomplish work orders in accordance with the terms of this contract.
Installation prices shall include operation & maintenance expenses associated with requirements in Section 1 of the PWS for the remainder of the contract (including any exercised options). See also the attached EIPS.
Certain aspects of this work may be subject to the Davis Bacon Act (DBA).
Individual work orders subject to the DBA shall be annotated by the contractor IAW the PWS. PID item pricing reflects the appropriate labor law applicable to the specified effort. Contractor shall use pre-priced (PID) items to the maximum extent. See CLIN X010 for subcontracting effort.
FOB: Destination
1006 1 Lump Sum OPTION Removal
FFP
Contractor shall provide all labor, tools, parts and incidentals necessary to provide removal of items identified by PID number and "C" on Attachment 1, Pricing Table to accomplish work orders in accordance with the terms of this contract. See also the attached EIPS.
Certain aspects of this work may be subject to the Davis Bacon Act (DBA).
Individual work orders subject to the DBA shall be annotated by the contractor IAW the PWS. PID item pricing reflects the appropriate labor law applicable to the specified effort.Contractor shall use pre-priced (PID) items to the maximum extent.
FOB: Destination
1007 1 Lump Sum OPTION Relocate
FFP
Contractor shall provide all labor, tools, parts and incidentals necessary to provide relocation of items identified by PID number and "D" on Attachment 1, Pricing Table to accomplish work orders in accordance with the terms of this contract. See also the attached EIPS. Contractor shall use pre-priced (PID) items to the maximum extent.
FOB: Destination
1008 1 Lump Sum OPTION Global Positioning System (GPS)
FFP
The contractor shall provide all labor, tools, parts and incidentals necessary to accomplish Data Collection Service in accordance with the terms of the contract (including but not limited to PWS Attachment 5.8). See also Attachment 1, Pricing Table for individual prices.
FOB: Destination
1009 1 Lump Sum OPTION Labor Hours
FFP
The contractor shall provide all labor necessary to accomplish work orders in accordance with the terms of this contract. See also FAR 52.232-7. This CLIN shall only be used when there is no pre-priced item (PID) established within Attachment 1, Pricing Table to perform the work.
FOB: Destination
1010 1 Lump Sum OPTION Material
FFP
The contractor shall furnish all materials, parts, and incidentals necessary to accomplish work orders in accordance with the terms of this contract. See also FAR 52.232-7. This CLIN shall only be used when there is no pre-priced item (PID) established within Attachment 1, Pricing Table to purchase the material.
This CLIN shall also be used when subcontractor(s) accomplishes the work.
Prepriced CLIN/SLIN/PID(s) shall be used regardless of who performs the work.
Separation of prepriced items from non-priced items is required, even when an entire job is subcontracted. See also the attached EIPS.
Material factor submitted is a with proposal is a "mixed rate" and includes all costs/profit to provide the material to the destination.
FOB: Destination
1011 Lump Sum OPTION Funding for Work Orders, JB MDL
FFP
This CLIN provides funding for work orders accomplished using CLINs/SLINs X004 through X010, and X011AA on individual task or work order(s) at the Joint Base McGuire-Dix-Lakehurst (JB MDL). The contractor shall use this CLIN and/or it's associated SLINs (as applicable) to invoice monthly for completed work orders IAW the terms of the contract.
FOB: Destination
1011AA 999 Lump Sum OPTION Funding for Work Orders
FFP
Joint Base McGuire-Dix-Lakehurst. This CLIN provides funding for work orders accomplished using CLINs/SLINs X004 through X010, and X012 specified on individual task or work order(s).
FOB: Destination
OPTION Other Services, Joint Base MDL
FFP
Services non-personal. The Contractor shall perform the services listed in the SLINs below IAW the terms and conditions of the contract at the Joint Base McGuire-Dix-Lakehurst (MDL). The services/prices specified within these SLINs are not included within the O&M price(s) listed in CLIN x001.
FOB: Destination
1012AA 100,000 Foot OPTION Additional Cable Marking & Locating
FFP
Joint Base McGuire-Dix-Lakehurst NJ. The Contractor shall conduct additional cable marking and locating services (above the quantities specified in PWS Section 1.3) IAW the terms and conditions of the contract. See also PWS Sections 1.3 & 1.4.
FOB: Destination
2001 Months OPTION Operation & Maintenance (O&M), McGuire
FFP
Services non-personal: The contractor shall furnish all labor, tools, parts and incidentals necessary to provide operation and maintenance (O&M) for the Base Telecommunication System (BTS) at McGuire AFB NJ in accordance with (IAW) contract terms and conditions.
FOB: Destination
2001AA 12 Months OPTION O&M, McGuire AFB NJ, BTS
FFP
O&M for the Base Telecommunication System (BTS) IAW contract terms and conditions.
FOB: Destination
2001AB 12 Months OPTION O&M, Hospital, McGuire AFB NJ, BTS
FFP
O&M for the Base Telecommunication System (BTS) IAW contract terms and conditions.
FOB: Destination
2001AC 12 Months OPTION McGuire AFB, Additional Funding, O&M
FFP
Additional Funding for O&M of the systems identified in the PWS (BTS)IAW contract terms and conditions.
FOB: Destination
2002 Months OPTION O&M at Ft Dix NJ
FFP
Services non-personal: The contractor shall furnish all labor, tools, parts and incidentals necessary to provide operation and maintenance (O&M) for the Base Telecommunication System (BTS) at Ft Dix NJ in accordance with (IAW) contract terms and conditions.
FOB: Destination
2002AA 12 Months OPTION O&M, Ft Dix NJ, BTS
FFP
O&M for the Base Telecommunication System (BTS) IAW contract terms and conditions.
FOB: Destination
2002AB 999 Months OPTION Ft Dix NJ, Additional Funding, O&M
FFP
Additional Funding for O&M of the systems identified in the PWS (BTS)IAW contract terms and conditions.
FOB: Destination
2003 Months OPTION O&M at Lakehurst NAES, NJ
FFP
Services non-personal: The contractor shall furnish all labor, tools, parts and incidentals necessary to provide operation and maintenance (O&M) for the Base Telecommunication System (BTS) at Lakehurst NAES, NJ in accordance with (IAW) contract terms and conditions.
FOB: Destination
2003AA 12 Months OPTION O&M, Lakehurst NAES, NJ, BTS
FFP
O&M for the Base Telecommunication System (BTS) IAW contract terms and conditions.
FOB: Destination
2003AB 12 Months OPTION Lakehurst NAES, Additional Funding, O&M
FFP
Additional Funding for O&M of the systems identified in the PWS (BTS) IAW contract terms and conditions.
FOB: Destination
2004 1 Lump Sum OPTION Purchase
FFP
Contractor shall purchase pre-priced material items (and applicable mounting hardware) identified by Product Identification (PID) number and "A" on Attachment 1, Pricing Table for work orders in accordance with the terms of this contract. See also the attached EIPS. Purchase prices include expenses associated with maintenance requirements described in the PWS for the remainder of the contract (including any exercised options). Contractor shall use pre-priced (PID) items to the maximum extent. See CLIN X010 for subcontracting effort.
FOB: Destination
2005 1 Lump Sum OPTION Installation
FFP
Contractor shall provide all labor, tools, parts and incidentals necessary to provide installation or services identified by PID number and "B" on attachment 1, Pricing Table to accomplish work orders in accordance with the terms of this contract.
Installation prices shall include operation & maintenance expenses associated with requirements in Section 1 of the PWS for the remainder of the contract (including any exercised options). See also the attached EIPS.
Certain aspects of this work may be subject to the Davis Bacon Act (DBA).
Individual work orders subject to the DBA shall be annotated by the contractor IAW the PWS. PID item pricing reflects the appropriate labor law applicable to the specified effort. Contractor shall use pre-priced (PID) items to the maximum extent. See CLIN X010 for subcontracting effort.
FOB: Destination
2006 1 Lump Sum OPTION Removal
FFP
Contractor shall provide all labor, tools, parts and incidentals necessary to provide removal of items identified by PID number and "C" on Attachment 1, Pricing Table to accomplish work orders in accordance with the terms of this contract. See also the attached EIPS.
Certain aspects of this work may be subject to the Davis Bacon Act (DBA).
Individual work orders subject to the DBA shall be annotated by the contractor IAW the PWS. PID item pricing reflects the appropriate labor law applicable to the specified effort.Contractor shall use pre-priced (PID) items to the maximum extent.
FOB: Destination
2007 1 Lump Sum OPTION Relocate
FFP
Contractor shall provide all labor, tools, parts and incidentals necessary to provide relocation of items identified by PID number and "D" on Attachment 1, Pricing Table to accomplish work orders in accordance with the terms of this contract. See also the attached EIPS. Contractor shall use pre-priced (PID) items to the maximum extent.
FOB: Destination
2008 1 Lump Sum OPTION Global Positioning System (GPS)
FFP
The contractor shall provide all labor, tools, parts and incidentals necessary to accomplish Data Collection Service in accordance with the terms of the contract (including but not limited to PWS Attachment 5.8). See also Attachment 1, Pricing Table for individual prices.
FOB: Destination
2009 1 Lump Sum OPTION Labor Hours
FFP
The contractor shall provide all labor necessary to accomplish work orders in accordance with the terms of this contract. See also FAR 52.232-7. This CLIN shall only be used when there is no pre-priced item (PID) established within Attachment 1, Pricing Table to perform the work.
FOB: Destination
2010 1 Lump Sum OPTION Material
FFP
The contractor shall furnish all materials, parts, and incidentals necessary to accomplish work orders in accordance with the terms of this contract. See also FAR 52.232-7. This CLIN shall only be used when there is no pre-priced item (PID) established within Attachment 1, Pricing Table to purchase the material.
This CLIN shall also be used when subcontractor(s) accomplishes the work.
Prepriced CLIN/SLIN/PID(s) shall be used regardless of who performs the work.
Separation of prepriced items from non-priced items is required, even when an entire job is subcontracted. See also the attached EIPS.
Material factor submitted with proposal is a "mixed rate" and includes all costs/profit to provide the material to the destination.
FOB: Destination
2011 Lump Sum OPTION Funding for Work Orders, JB MDL
FFP
This CLIN provides funding for work orders accomplished using CLINs/SLINs X004 through X010, and X011AA on individual task or work order(s) at the Joint Base McGuire-Dix-Lakehurst (JB MDL). The contractor shall use this CLIN and/or it's associated SLINs (as applicable) to invoice monthly for completed work orders IAW the terms of the contract.
FOB: Destination
2011AA 999 Lump Sum OPTION Funding for Work Orders
FFP
Joint Base McGuire-Dix-Lakehurst. This CLIN provides funding for work orders accomplished using CLINs/SLINs X004 through X010, and X012 specified on individual task or work order(s).
FOB: Destination
OPTION Other Services, Joint Base MDL
FFP
Services non-personal. The Contractor shall perform the services listed in the SLINs below IAW the terms and conditions of the contract at the Joint Base McGuire-Dix-Lakehurst (MDL). The services/prices specified within these SLINs are not included within the O&M price(s) listed in CLIN x001.
FOB: Destination
2012AA 100,000 Foot OPTION Additional Cable Marking & Locating
FFP
Joint Base McGuire-Dix-Lakehurst NJ. The Contractor shall conduct additional cable marking and locating services (above the quantities specified in PWS Section 1.3) IAW the terms and conditions of the contract. See also PWS Sections 1.3 & 1.4.
FOB: Destination
3001 Months OPTION Operation & Maintenance (O&M), McGuire
FFP
Services non-personal: The contractor shall furnish all labor, tools, parts and incidentals necessary to provide operation and maintenance (O&M) for the Base Telecommunication System (BTS) at McGuire AFB NJ in accordance with (IAW) contract terms and conditions.
FOB: Destination
3001AA 12 Months OPTION O&M, McGuire AFB NJ, BTS
FFP
O&M for the Base Telecommunication System (BTS) IAW contract terms and conditions.
FOB: Destination
3001AB 12 Months OPTION O&M, Hospital, McGuire AFB NJ, BTS
FFP
O&M for the Base Telecommunication System (BTS) IAW contract terms and conditions.
FOB: Destination
3001AC 12 Months OPTION McGuire AFB, Additional Funding, O&M
FFP
Additional Funding for O&M of the systems identified in the PWS (BTS)IAW contract terms and conditions.
FOB: Destination
3002 Months OPTION O&M at Ft Dix NJ
FFP
Services non-personal: The contractor shall furnish all labor, tools, parts and incidentals necessary to provide operation and maintenance (O&M) for the Base Telecommunication System (BTS) at Ft Dix NJ in accordance with (IAW) contract terms and conditions.
FOB: Destination
3002AA 12 Months OPTION O&M, Ft Dix NJ, BTS
FFP
O&M for the Base Telecommunication System (BTS) IAW contract terms and conditions.
FOB: Destination
3002AB 999 Months OPTION Ft Dix NJ, Additional Funding, O&M
FFP
Additional Funding for O&M of the systems identified in the PWS (BTS)IAW contract terms and conditions.
FOB: Destination
3003 Months OPTION O&M at Lakehurst NAES, NJ
FFP
Services non-personal: The contractor shall furnish all labor, tools, parts and incidentals necessary to provide operation and maintenance (O&M) for the Base Telecommunication System (BTS) at Lakehurst NAES, NJ in accordance with (IAW) contract terms and conditions.
FOB: Destination
3003AA 12 Months OPTION O&M, Lakehurst NAES, NJ, BTS
FFP
O&M for the Base Telecommunication System (BTS) IAW contract terms and conditions.
FOB: Destination
3003AB 12 Months OPTION Lakehurst NAES, Additional Funding, O&M
FFP
Additional Funding for O&M of the systems identified in the PWS (BTS) IAW contract terms and conditions.
FOB: Destination
3004 1 Lump Sum OPTION Purchase
FFP
Contractor shall purchase pre-priced material items (and applicable mounting hardware) identified by Product Identification (PID) number and "A" on Attachment 1, Pricing Table for work orders in accordance with the terms of this contract. See also the attached EIPS. Purchase prices include expenses associated with maintenance requirements described in the PWS for the remainder of the contract (including any exercised options). Contractor shall use pre-priced (PID) items to the maximum extent. See CLIN X010 for subcontracting effort.
FOB: Destination
3005 1 Lump Sum OPTION Installation
FFP
Contractor shall provide all labor, tools, parts and incidentals necessary to provide installation or services identified by PID number and "B" on attachment 1, Pricing Table to accomplish work orders in accordance with the terms of this contract.
Installation prices shall include operation & maintenance expenses associated with requirements in Section 1 of the PWS for the remainder of the contract (including any exercised options). See also the attached EIPS.
Certain aspects of this work may be subject to the Davis Bacon Act (DBA).
Individual work orders subject to the DBA shall be annotated by the contractor IAW the PWS. PID item pricing reflects the appropriate labor law applicable to the specified effort. Contractor shall use pre-priced (PID) items to the maximum extent. See CLIN X010 for subcontracting effort.
FOB: Destination
3006 1 Lump Sum OPTION Removal
FFP
Contractor shall provide all labor, tools, parts and incidentals necessary to provide removal of items identified by PID number and "C" on Attachment 1, Pricing Table to accomplish work orders in accordance with the terms of this contract. See also the attached EIPS.
Certain aspects of this work may be subject to the Davis Bacon Act (DBA).
Individual work orders subject to the DBA shall be annotated by the contractor IAW the PWS. PID item pricing reflects the appropriate labor law applicable to the specified effort.Contractor shall use pre-priced (PID) items to the maximum extent.
FOB: Destination
3007 1 Lump Sum OPTION Relocate
FFP
Contractor shall provide all labor, tools, parts and incidentals necessary to provide relocation of items identified by PID number and "D" on Attachment 1, Pricing Table to accomplish work orders in accordance with the terms of this contract. See also the attached EIPS. Contractor shall use pre-priced (PID) items to the maximum extent.
FOB: Destination
3008 1 Lump Sum OPTION Global Positioning System (GPS)
FFP
The contractor shall provide all labor, tools, parts and incidentals necessary to accomplish Data Collection Service in accordance with the terms of the contract (including but not limited to PWS Attachment 5.8). See also Attachment 1, Pricing Table for individual prices.
FOB: Destination
3009 1 Lump Sum OPTION Labor Hours
FFP
The contractor shall provide all labor necessary to accomplish work orders in accordance with the terms of this contract. See also FAR 52.232-7. This CLIN shall only be used when there is no pre-priced item (PID) established within Attachment 1, Pricing Table to perform the work.
FOB: Destination
3010 1 Lump Sum OPTION Material
FFP
The contractor shall furnish all materials, parts, and incidentals necessary to accomplish work orders in accordance with the terms of this contract. See also FAR 52.232-7. This CLIN shall only be used when there is no pre-priced item (PID) established within Attachment 1, Pricing Table to purchase the material.
This CLIN shall also be used when subcontractor(s) accomplishes the work.
Prepriced CLIN/SLIN/PID(s) shall be used regardless of who performs the work.
Separation of prepriced items from non-priced items is required, even when an entire job is subcontracted. See also the attached EIPS.
Material factor submitted with proposal is a "mixed rate" and includes all costs/profit to provide the material to the destination.
Material factor submitted with proposal is a "mixed rate" and includes all costs/profit to provide the material to the destination.
FOB: Destination
3011 Lump Sum OPTION Funding for Work Orders, JB MDL
FFP
This CLIN provides funding for work orders accomplished using CLINs/SLINs X004 through X010, and X011AA on individual task or work order(s) at the Joint Base McGuire-Dix-Lakehurst (JB MDL). The contractor shall use this CLIN and/or it's associated SLINs (as applicable) to invoice monthly for completed work orders IAW the terms of the contract.
FOB: Destination
3011AA 999 Lump Sum OPTION Funding for Work Orders
FFP
Joint Base McGuire-Dix-Lakehurst. This CLIN provides funding for work orders accomplished using CLINs/SLINs X004 through X010, and X012 specified on individual task or work order(s).
FOB: Destination
OPTION Other Services, Joint Base MDL
FFP
Services non-personal. The Contractor shall perform the services listed in the SLINs below IAW the terms and conditions of the contract at the Joint Base McGuire-Dix-Lakehurst (MDL). The services/prices specified within these SLINs are not included within the O&M price(s) listed in CLIN x001.
FOB: Destination
3012AA 100,000 Foot OPTION Additional Cable Marking & Locating
FFP
Joint Base McGuire-Dix-Lakehurst NJ. The Contractor shall conduct additional cable marking and locating services (above the quantities specified in PWS Section 1.3) IAW the terms and conditions of the contract. See also PWS Sections 1.3 & 1.4.
FOB: Destination
4001 Months OPTION Operation & Maintenance (O&M), McGuire
FFP
Services non-personal: The contractor shall furnish all labor, tools, parts and incidentals necessary to provide operation and maintenance (O&M) for the Base Telecommunication System (BTS) at McGuire AFB NJ in accordance with (IAW) contract terms and conditions.
FOB: Destination
4001AA 12 Months OPTION O&M, McGuire AFB NJ, BTS
FFP
O&M for the Base Telecommunication System (BTS) IAW contract terms and conditions.
FOB: Destination
4001AB 12 Months OPTION O&M, Hospital, McGuire AFB NJ, BTS
FFP
O&M for the Base Telecommunication System (BTS) IAW contract terms and conditions.
FOB: Destination
4001AC 12 Months OPTION McGuire AFB, Additional Funding, O&M
FFP
Additional Funding for O&M of the systems identified in the PWS (BTS)IAW contract terms and conditions.
FOB: Destination
4002 Months OPTION O&M at Ft Dix NJ
FFP
Services non-personal: The contractor shall furnish all labor, tools, parts and incidentals necessary to provide operation and maintenance (O&M) for the Base Telecommunication System (BTS) at Ft Dix NJ in accordance with (IAW) contract terms and conditions.
FOB: Destination
4002AA 12 Months OPTION O&M, Ft Dix NJ, BTS
FFP
O&M for the Base Telecommunication System (BTS) IAW contract terms and conditions.
FOB: Destination
4002AB 999 Months OPTION Ft Dix NJ, Additional Funding, O&M
FFP
Additional Funding for O&M of the systems identified in the PWS (BTS)IAW contract terms and conditions.
FOB: Destination
4003 Months OPTION O&M at Lakehurst NAES, NJ
FFP
Services non-personal: The contractor shall furnish all labor, tools, parts and incidentals necessary to provide operation and maintenance (O&M) for the Base Telecommunication System (BTS) at Lakehurst NAES, NJ in accordance with (IAW) contract terms and conditions.
FOB: Destination
4003AA 12 Months OPTION O&M, Lakehurst NAES, NJ, BTS
FFP
O&M for the Base Telecommunication System (BTS) IAW contract terms and conditions.
FOB: Destination
4003AB 12 Months OPTION Lakehurst NAES, Additional Funding, O&M
FFP
Additional Funding for O&M of the systems identified in the PWS (BTS) IAW contract terms and conditions.
FOB: Destination
4004 1 Lump Sum OPTION Purchase
FFP
Contractor shall purchase pre-priced material items (and applicable mounting hardware) identified by Product Identification (PID) number and "A" on Attachment 1, Pricing Table for work orders in accordance with the terms of this contract. See also the attached EIPS. Purchase prices include expenses associated with maintenance requirements described in the PWS for the remainder of the contract (including any exercised options). Contractor shall use pre-priced (PID) items to the maximum extent. See CLIN X010 for subcontracting effort.
FOB: Destination
4005 1 Lump Sum OPTION Installation
FFP
Contractor shall provide all labor, tools, parts and incidentals necessary to provide installation or services identified by PID number and "B" on attachment 1, Pricing Table to accomplish work orders in accordance with the terms of this contract.
Installation prices shall include operation & maintenance expenses associated with requirements in Section 1 of the PWS for the remainder of the contract (including any exercised options). See also the attached EIPS.
Certain aspects of this work may be subject to the Davis Bacon Act (DBA).
Individual work orders subject to the DBA shall be annotated by the contractor IAW the PWS. PID item pricing reflects the appropriate labor law applicable to the specified effort. Contractor shall use pre-priced (PID) items to the maximum extent. See CLIN X010 for subcontracting effort.
FOB: Destination
4006 1 Lump Sum OPTION Removal
FFP
Contractor shall provide all labor, tools, parts and incidentals necessary to provide removal of items identified by PID number and "C" on Attachment 1, Pricing Table to accomplish work orders in accordance with the terms of this contract. See also the attached EIPS.
Certain aspects of this work may be subject to the Davis Bacon Act (DBA).
Individual work orders subject to the DBA shall be annotated by the contractor IAW the PWS. PID item pricing reflects the appropriate labor law applicable to the specified effort.Contractor shall use pre-priced (PID) items to the maximum extent.
FOB: Destination
4007 1 Lump Sum OPTION Relocate
FFP
Contractor shall provide all labor, tools, parts and incidentals necessary to provide relocation of items identified by PID number and "D" on Attachment 1, Pricing Table to accomplish work orders in accordance with the terms of this contract. See also the attached EIPS. Contractor shall use pre-priced (PID) items to the maximum extent.
FOB: Destination
4008 1 Lump Sum OPTION Global Positioning System (GPS)
FFP
The contractor shall provide all labor, tools, parts and incidentals necessary to accomplish Data Collection Service in accordance with the terms of the contract (including but not limited to PWS Attachment 5.8). See also Attachment 1, Pricing Table for individual prices.
FOB: Destination
4009 1 Lump Sum OPTION Labor Hours
FFP
The contractor shall provide all labor necessary to accomplish work orders in accordance with the terms of this contract. See also FAR 52.232-7. This CLIN shall only be used when there is no pre-priced item (PID) established within Attachment 1, Pricing Table to perform the work.
FOB: Destination
4010 1 Lump Sum OPTION Material
FFP
The contractor shall furnish all materials, parts, and incidentals necessary to accomplish work orders in accordance with the terms of this contract. See also FAR 52.232-7. This CLIN shall only be used when there is no pre-priced item (PID) established within Attachment 1, Pricing Table to purchase the material.
This CLIN shall also be used when subcontractor(s) accomplishes the work.
Prepriced CLIN/SLIN/PID(s) shall be used regardless of who performs the work.
Seperation of prepriced items from non-priced items is required, even when an entire job is subcontracted. See also the attached EIPS.
FOB: Destination
4011 Lump Sum OPTION Funding for Work Orders, JB MDL
FFP
This CLIN provides funding for work orders accomplished using CLINs/SLINs X004 through X010, and X011AA on individual task or work order(s) at the Joint Base McGuire-Dix-Lakehurst (JB MDL). The contractor shall use this CLIN and/or it's associated SLINs (as applicable) to invoice monthly for completed work orders IAW the terms of the contract.
FOB: Destination
4011AA 999 Lump Sum OPTION Funding for Work Orders
FFP
Joint Base McGuire-Dix-Lakehurst. This CLIN provides funding for work orders accomplished using CLINs/SLINs X004 through X010, and X012 specified on individual task or work order(s).
FOB: Destination
OPTION Other Services, Joint Base MDL
FFP
Services non-personal. The Contractor shall perform the services listed in the SLINs below IAW the terms and conditions of the contract at the Joint Base McGuire-Dix-Lakehurst (MDL). The services/prices specified within these SLINs are not included within the O&M price(s) listed in CLIN x001.
FOB: Destination
4012AA 100,000 Foot OPTION Additional Cable Marking & Locating
FFP
Joint Base McGuire-Dix-Lakehurst NJ. The Contractor shall conduct additional cable marking and locating services (above the quantities specified in PWS Section 1.3) IAW the terms and conditions of the contract. See also PWS Sections 1.3 & 1.4.
FOB: Destination
Section D - Packaging and Marking
CLAUSES INCORPORATED BY FULL TEXT
5352.247-9006 MARKING OF WARRANTED ITEMS (AFMC) (JUL 1997)
The Contractor shall mark the items or otherwise furnish notice with the items to show the existence of the warranty; its substance and duration; and the name, address, and telephone number of the person to notify if the items are defective in accordance with FAR 46.706(b)(5), Warranty terms and conditions.
Section E - Inspection and Acceptance
INSPECTION AND ACCEPTANCE TERMS
Supplies/services will be inspected/accepted at:
CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY
0001 Destination Government Destination Government 0001AA Destination Government Destination Government 0001AB Destination Government Destination Government 0001AC Destination Government Destination Government 0002 Destination Government Destination Government 0002AA Destination Government Destination Government 0002AB Destination Government Destination Government 0003 Destination Government Destination Government 0003AA Destination Government Destination Government 0003AB Destination Government Destination Government 0004 Destination Government Destination Government 0005 Destination Government Destination Government 0006 Destination Government Destination Government 0007 Destination Government Destination Government 0008 Destination Government Destination Government 0009 Destination Government Destination Government 0010 Destination Government Destination Government 0011 Destination Government Destination Government 0011AA Destination Government Destination Government 0012 Destination Government Destination Government 0012AA Destination Government Destination Government 1001 Destination Government Destination Government 1001AA Destination Government Destination Government 1001AB Destination Government Destination Government 1001AC Destination Government Destination Government 1002 Destination Government Destination Government 1002AA Destination Government Destination Government 1002AB Destination Government Destination Government 1003 Destination Government Destination Government 1003AA Destination Government Destination Government 1003AB Destination Government Destination Government 1004 Destination Government Destination Government 1005 Destination Government Destination Government 1006 Destination Government Destination Government 1007 Destination Government Destination Government 1008 Destination Government Destination Government 1009 Destination Government Destination Government 1010 Destination Government Destination Government 1011 Destination Government Destination Government 1011AA Destination Government Destination Government 1012 Destination Government Destination Government 1012AA Destination Government Destination Government 2001 Destination Government Destination Government 2001AA Destination Government Destination Government 2001AB Destination Government Destination Government 2001AC Destination Government Destination Government
2002 Destination Government Destination Government 2002AA Destination Government Destination Government 2002AB Destination Government Destination Government 2003 Destination Government Destination Government 2003AA Destination Government Destination Government 2003AB Destination Government Destination Government 2004 Destination Government Destination Government 2005 Destination Government Destination Government 2006 Destination Government Destination Government 2007 Destination Government Destination Government 2008 Destination Government Destination Government 2009 Destination Government Destination Government 2010 Destination Government Destination Government 2011 Destination Government Destination Government 2011AA Destination Government Destination Government 2012 Destination Government Destination Government 2012AA Destination Government Destination Government 3001 Destination Government Destination Government 3001AA Destination Government Destination Government 3001AB Destination Government Destination Government 3001AC Destination Government Destination Government 3002 Destination Government Destination Government 3002AA Destination Government Destination Government 3002AB Destination Government Destination Government 3003 Destination Government Destination Government 3003AA Destination Government Destination Government 3003AB Destination Government Destination Government 3004 Destination Government Destination Government 3005 Destination Government Destination Government 3006 Destination Government Destination Government 3007 Destination Government Destination Government 3008 Destination Government Destination Government 3009 Destination Government Destination Government 3010 Destination Government Destination Government 3011 Destination Government Destination Government 3011AA Destination Government Destination Government 3012 Destination Government Destination Government 3012AA Destination Government Destination Government 4001 Destination Government Destination Government 4001AA Destination Government Destination Government 4001AB Destination Government Destination Government 4001AC Destination Government Destination Government 4002 Destination Government Destination Government 4002AA Destination Government Destination Government 4002AB Destination Government Destination Government 4003 Destination Government Destination Government 4003AA Destination Government Destination Government 4003AB Destination Government Destination Government 4004 Destination Government Destination Government 4005 Destination Government Destination Government 4006 Destination Government Destination Government 4007 Destination Government Destination Government 4008 Destination Government Destination Government 4009 Destination Government Destination Government 4010 Destination Government Destination Government 4011 Destination Government Destination Government 4011AA Destination Government Destination Government
4012 Destination Government Destination Government 4012AA Destination Government Destination Government
CLAUSES INCORPORATED BY REFERENCE
52.246-16 Responsibility For Supplies APR 1984
52.246-4 INSPECTION OF SERVICES--FIXED-PRICE (AUG 1996)
(a) Definitions. "Services," as used in this clause, includes services performed, workmanship, and material furnished or utilized in the performance of services.
(b) The Contractor shall provide and maintain an inspection system acceptable to the Government covering the services under this contract. Complete records of all inspection work performed by the Contractor shall be maintained and made available to the Government during contract performance and for as long afterwards as the contract requires.
(c) The Government has the right to inspect and test all services called for by the contract, to the extent practicable at all times and places during the term of the contract. The Government shall perform inspections and tests in a manner that will not unduly delay the work.
(d) If the Government performs inspections or tests on the premises of the Contractor or a subcontractor, the Contractor shall furnish, and shall require subcontractors to furnish, at no increase in contract price, all reasonable facilities and assistance for the safe and convenient performance of these duties.
(e) If any of the services do not conform with contract requirements, the Government may require the Contractor to perform the services again in conformity with contract requirements, at no increase in contract amount. When the defects in services cannot be corrected by reperformance, the Government may (1) require the Contractor to take necessary action to ensure that future performance conforms to contract requirements and (2) reduce the contract price to reflect the reduced value of the services performed.
(f) If the Contractor fails to promptly perform the services again or to take the necessary action to ensure future…
This is the start of the file's text. The full file is on GovTribe.
Other files
Show all 18
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
File details come from the government source that posted it. Updated .