Attachment 1 - Vector Network Analyzer (VNA) Specifications.docx
DOCX document 29 KB Posted
- Attached to
- Vector Network Analyzer Federal contract opportunity
- Solicitation number
- FA875125Q0031
About this file
This is a technical specifications document for a Vector Network Analyzer (VNA) procurement, attached to solicitation FA875125Q0031 issued by the Air Force Research Laboratory in Rome, NY. The document details requirements for one rack-mountable VNA with two or more ports, featuring specific technical parameters including frequency range of 10 kHz to 20 GHz or greater, frequency resolution of 1 Hz, power settings from 0 dBm to -60 dBm, and noise floor better than -100 dBm.
The solicitation is a total small business set-aside under NAICS 334515 with a size standard of 750 employees. Quotes are due by 3:00 PM ET on March 13, 2025, with delivery required within 15 weeks after receipt of order. The government will award to the lowest-priced technically acceptable offer. The specified reference model is Keysight Technologies part numbers E5080B, E5080B-2K0, and E5080B-1CP, though equivalent solutions meeting the technical specifications will be considered. Offerors must be authorized resellers of proposed equipment, and only new factory equipment will be accepted.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Attachment 2 - Representations and Certifications.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment 1 - Specifications Listing
Qty. 1 Vector Network Analyzer (VNA) meeting or exceeding the following minimum specifications:
Vector network analyzer with two or more ports 19" rack mountable Ethernet computer connectivity Computer controllable with SCPI commands and VISA serial control over ethernet External reference input: 10 MHz +-10 ppm; 50 Ohm impedance Power setting range: 0 dBm to -60 dBm or greater Power accuracy: 4 dB Noise floor: better than -100 dBm Frequency range: 10 kHz to 20 GHz or greater Frequency resolution: 1 Hz Frequency accuracy: better than 10 ppm IF bandwidth: Adjustable, minimum 10 Hz or less, maximum 10 MHz or greater Number of points in a trace: 1 to 100,000 (minimum) Directivity: better than 20 dB below 10 GHz Source match: better than 20 dB below 10 GHz Load match: better than 10 dB below 10 GHz Connectors: 3.5 mm (SMA) with 50 Ohm impedance Crosstalk between ports: better than 50 dB port input VSWR: better than 1.8 below 10 GHz Display: Present Outlet power: 120 V, 15 A or 20 A Standard Warranty
Brand Name or Equal: Keysight Technologies* part numbers: E5080B, E5080B-2K0, and E5080B-1CP, or equal.
* Keysight Technologies is a manufacturer whose commercial offerings are known to satisfy the Government’s requirement. Accordingly, their relevant part numbers are provided here for reference, only. The identified items reflect the salient physical, functional, or performance characteristics that reflect the characteristics and level of quality that will satisfy the minimum Government requirement; however the offeror may provide a solution equivalent to or exceeding the functional and performance characteristics of the identified items and it will be considered for technical acceptability.
Offerors must provide technical information in sufficient detail to allow adequate and thorough technical evaluation of the proposed equal solution. The Government will evaluate products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Government. The Government is not responsible for obtaining technical information in support of a proposed equivalent solution.
File details come from the government source that posted it. Updated .