FE_FA8681-25-C-B005.pdf

Anil Arora Principal, Contracts

25 Aug 25

Statement of Work for

Production and Assembly of 3,694 Proximity Fuze Sensors with GFM M151 Warheads

14 AUGUST 2025

1.0 Purpose

The FALCO program requires assembly and packaging of 3,694 proximity fuze sensor assemblies with M151 warheads.

1.1 Scope

1.1.1 This Statement of Work defines the scope of effort required to manufacture and assemble 3,694 proximity fuze sensors with Government-furnished M151 warheads and pack and ship 3,694 M151 Warhead/Proximity Fuze Sensor Assemblies in PA92 containers.

1.2 Requirements

1.2.1 The Contractor shall manufacture and assemble 3,694 Proximity Fuze Sensors with M151 Warheads.

1.2.2 The Contractor shall receive from the Government 3,694 M151 Warheads with M423 Fuzes installed. The Contractor shall store such warheads as necessary, remove and demilitarize the M423 Fuzes from the M151 Warheads, and assemble the newly manufactured proximity fuze sensors onto the M151 Warheads. The Contractor shall refer to Drawing No. 8882186 for use of Loctite and torque requirements for assembly of newly manufactured proximity fuze sensors onto the M151 Warheads. The Contractor shall provide PA92 containers with internal dunnage to support the packaging and shipment of M151 Warhead/Proximity Fuze Sensor Assemblies.

1.2.3 For final product acceptance, the Contractor shall create and apply new ammunition lot numbers to the completed M151 Warhead/Proximity Fuze Sensor Assemblies in accordance with MIL-STD-1168 Revision C, dated March 2014, and MIL-HDBK-1461 Revision B, dated October 2019. Each lot of M151 Warhead/Fuze Assemblies shall be delivered with an Ammunition Data Card (ADC) in accordance with CDRL A001 (Section J, Attachment 02 of Contract No. FA8681-25-C-B005) by utilizing the World- Wide Ammunition Data Repository Program. The ADC content must be approved by the Government’s Program Office prior to the first shipment (CDRL A001). The Contractor shall process a DD Form 1149 in accordance with DoD4161.2-M, Appendix 5 to accept and return units after conversion is complete with DD Form 250 acceptance at origin.

The Government shall provide the requisition number for Block 6 of DD Form 1149.

1.2.4 The Contractor shall define and maintain system safety efforts per MIL-STD-882E.

1.2.5 The Contractor shall provide system safety personnel support for the review by the Government’s Fuze and Initiation technical subject matter expert.

1.2.6 An Interim Hazard Classification or Final Hazard Classification may be provided by the Government. The Interim Hazard Classification shall be provided 21 days prior to the first shipment.

1.2.7 The Contractor shall provide clear communication and visibility into current status of program schedule and production deliveries through weekly meetings.

1.2.8 The proximity fuze sensor part number is 4410001-06 and utilizes sensor software revision 1.8.2 and hardware revision B. Any changes to this configuration will be considered out of scope.

1.2.9 The Contractor has sole Material Review Board authority and will have the right to perform Rework or Repair without Government notification or approval.

1.3 Quality Assurance

1.3.1 The Contractor shall maintain certification to ISO 9001:2015 by an accredited certification body throughout the term of this contract. The Contractor shall provide the Government with copies of its ISO 9001:2015 certificate upon request. The Contractor shall establish, implement, and maintain a Quality Management System (QMS) that conforms to the requirements of ISO 9001:2015, "Quality management systems – Requirements." The QMS shall encompass all aspects of contract performance including, namely, design (if applicable), procurement, manufacturing, testing, inspection, packaging, and delivery. Failure to maintain an effective QMS in compliance with the requirements of this contract may be grounds for termination for default.

1.4 Delivery Instructions

1.4.1 The Contractor shall re-stencil in accordance with Drawing No. 8882186, Rev.

AL, which contains stencil details (color, ink, location, etc.), and other data provided by the Government as agreed to by the Contractor. The Contractor shall package in accordance with Drawing No. DW233AS2076, Rev. C (or most current version), palletize in accordance with Drawing No. 6214254, Rev. G, mark in accordance with MIL-STD-129R, dated 18 February 2014, and ship to the below address. The Contractor shall include a hard copy of the completed DD Form1149 in each shipment of the M151 Warheads/Proximity Fuze Sensor Assemblies.

Ship To:

DODAAC: W25G1R

Country Code: USA Letterkenny Munitions Center Route 997, Voelz Gate Emergency 717-267-8800 Chambersburg, PA 17201-4150 MARK FOR: USAF FG5 Account United States

Jason W. Straley Email: jason.w.straley.civ@army.mil Telephone: 717-267-5241

The Contractor shall send a courtesy electronic copy of all shipping documentation to the

Government’s Program Office upon completion of each shipment. The first shipment will be made 15 months after Contract award.

2.0 GENERAL INFORMATION

2.1 Meetings/Reviews

The Contractor shall provide status updates as requested by the Government’s Program Manager.

2.2 Travel

No travel is required.

2.3 Government Furnished Assets

2.3.1 Government Furnished Facilities – None

2.3.2 Government Furnished Equipment or Property –The Government will provide the Contractor 3,694 M151 Warheads with M423 Fuzes.

The Contractor shall take title to M423 Fuzes once they are separated from the M151 Warheads. Additionally, the Contractor shall take title to the packaging of the M151 Warhead with M423 Fuzes once the M151 Warhead with M423 Fuzes are removed for processing.

The Government shall ship the required 3,694 Government-furnished M151 Warhead with M423 Fuzes to the Contractor in eight (8) to ten (10) shipments and each shipment shall require prior written approval from the Contractor’s Program Manager and be made no later than 20 days prior to forecasted shipment date of the associated Warhead/Proximity Fuze Sensor Assemblies. Additionally, the Contractor shall have the right to reject warheads it deems in its sole discretion to be defective or questionable and shall not be responsible for the rework or repair of the same. Finally, failure to timely provide the required Government-furnished M151 Warhead with M423 Fuzes shall relieve the Contractor of the contractual delivery requirement on a day-for-day basis.

2.3.3 Government Furnished Information –

The Government shall provide the Contractor ADCs for the 3,694 Government-furnished M151 Warheads with M423 Fuzes.

3.0 APPLICABLE DOCUMENTS – None

4.0 CONTRACT DATA REQUIREMENTS LIST (CDRLs):

A001 Ammunitions Data Card (ADC) – APPROVAL

Performance Based Payment Plan Attachment 03 6 August 2025

FA8681-25-C-B005

Section J, Attachment 03

Anticipated PBP Invoice Month

PBP Value PBP Event

Nov-25 $1,703,865 25% of material received by TSC

Dec-25 $1,359,860 50% of material received by TSC

Jan-26 $2,387,838 80% of material received by TSC and L3Harris subassembly work begins

Mar-26 $2,554,712 TSC 1st month shipment to L3Harris and 65% of material received by L3Harris

Apr-26 $1,271,100 TSC 2nd month shipment to L3Harris

May-26 $1,271,100 TSC 3rd month shipment to L3Harris

Jun-26 $1,023,007 TSC 4th month shipment to L3Harris

Invoices for delivered Warhead/Proximity Fuze Sensor Assemblies will be liquidated at a rate of 77.5% to account for Performance-Based Payments. The verification official for Performance-Based Payments is Jesse Whinham, Contracting Officer, jesse.whinham@us.af.mil, and 801-775-3237.

CUI

FA8681-25-C-B005

Section J, Attachment 05

Data Rights Assertion Attachment 05

24 February 2025

Technical Data to Be Furnished with Restrictions

Basis for Assertion

Asserted Rights Category

Name of Person Asserting

Restrictions

FUZE, APKWS-CUAS, PN

44100001

Developed at Private Expense - IRAD Project 12R4410 and 12R4523

Limited L3Harris Fuzing and Ordnance Systems, Inc.

TSC APKWS PROX, PN 284700 Developed at Private Expense Limited Technology Service Corporation

PWB ASSEMBLY, PN

441000034

Developed at Private Expense - IRAD Project 12R4410 and 12R4523

Limited L3Harris Fuzing and Ordnance Systems, Inc.

FUZE, APKWS-CUAS, LESS

BOOSTER AND

LEAD, PN 44100002

Developed at Private Expense - IRAD Project 12R4410 and 12R4523

Limited L3Harris Fuzing and Ordnance Systems, Inc.

ADAPTOR, WARHEAD ASSY,

PN 44100003

Developed at Private Expense - IRAD Project 12R4410 and 12R4523

Limited L3Harris Fuzing and Ordnance Systems, Inc.

ADAPTOR, WARHEAD, PN

44100004

Developed at Private Expense - IRAD Project 12R4410 and 12R4523

Limited L3Harris Fuzing and Ordnance Systems, Inc.

SPACER ASSEMBLY S&A. PN

44100005

Developed at Private Expense - IRAD Project 12R4410 and 12R4523

Limited L3Harris Fuzing and Ordnance Systems, Inc.

BOTTOM PLATE

ASSEMBLY, PN

44100010

Developed at Private Expense - IRAD Project 12R4410 and 12R4523

Limited L3Harris Fuzing and Ordnance Systems, Inc.

COMMON CONTRACT, PN

44100015

Developed at Private Expense - IRAD Project 12R4410 and 12R4523

Limited L3Harris Fuzing and Ordnance Systems, Inc.

TOP PLATE, PN

44100025

Developed at Private Expense - IRAD Project 12R4410 and 12R4523

Limited L3Harris Fuzing and Ordnance Systems, Inc.

SPACER TOP, PN

44100006

Developed at Private Expense - IRAD Project 12R4410 and 12R4523

Limited L3Harris Fuzing and Ordnance Systems, Inc.

DEVICE, SAFETY AND ARMING

(LOADED), PN 44100008

Developed at Private Expense - IRAD Project 12R4410 and 12R4523

Limited L3Harris Fuzing and Ordnance Systems, Inc.

DEVICE, SAFETY AND ARMING

(METAL

PARTS), PN 44100030

Developed at Private Expense - IRAD Project 12R4410 and 12R4523

Limited L3Harris Fuzing and Ordnance Systems, Inc.

ROTOR ASSEMBLY, PN

44100020

Developed at Private Expense - IRAD Project 12R4410 and 12R4523

Limited L3Harris Fuzing and Ordnance Systems, Inc.

ROTOR, PN 44100019 Developed at Private Expense - IRAD Project 12R4410 and 12R4523

Limited L3Harris Fuzing and Ordnance Systems, Inc.

STRAP, ROTOR GROUND, PN

44100018

Developed at Private Expense - IRAD Project 12R4410 and 12R4523

Limited L3Harris Fuzing and Ordnance Systems, Inc.