AFUO_Sewing_Equipment_SOW.docx

FA8606-18-D-0014

Statement of Work (SOW) 14 March 2018

STATEMENT OF WORK (SOW)

FOR

THE ACQUISITION OF SEWING EQUIPMENT FOR THE AIR FORCE UNIFORM OFFICE (AFUO)

Prepared by

AIR FORCE UNIFORM OFFICE,

AIRCREW PERFORMACE BRANCH,

HUMAN SYSTEMS PROGRAM OFFICE,

AGILE COMBAT SUPPORT DIRECTORATE (AFLCMC/WN)

RECORD OF REVISIONS

STATEMENT OF WORK (SOW)

FOR

THE ACQUISITION OF SEWING EQUIPMENT FOR THE AIR FORCE UNIFORM OFFICE (AFUO)

1.0 Scope

This Statement of Work (SOW) defines the tasks the Contractor shall produce and deliver to the AFUO. The AFUO requires three special types of sewing equipment to be used in the development and fabrication of uniform prototypes. The Contractor shall complete all efforts associated with procurement of these equipment as outlined in this SOW.

2.0 Requirements

The Contractor shall provide the required equipment and attachments to accomplish the tasks defined in this SOW.

General The Contractor shall produce and deliver three (3) sewing machines and two (2) attachments defined in this SOW.

Delivery The Contractor shall deliver three (3) sewing equipment to Bldg 63, 1901 Tenth Street, Wright-Patterson AFB, OH 45433 by 6 Dec 2019.

Contents The Contractor shall deliver the following equipment and attachments:

· One Industrial Coverstitch w/ left hand knife w/ under trimmers complete w/ waste removal system Features:

· Fully assembled table & servo motor

· Max Sewing speed: 6,500 RPM

· Stitch Type: 3-Needle

· No looper thread Twining

· Needle bar stroke conversion mechanism

· Micro-lifter mechanism

· One Industrial Felling Machine off the arm machine complete w/ one HP motor w/ synchronizer Features:

· Max Sewing speed: 4,500 sti/min

· Feed adjusting method (main feed): Slide-type stitch -length adjusting method

· Feed adjusting method (differential feed): Lever adjusting method

· Top feed roller width: 11.9mm

· Needle: UY130GS (standard) / Nm140 (#22)

· One Industrial Four Thread Serger complete w/ servo motor dry head Features:

· Stitch Type: 2-needle overlock

· Max Sewing Speed: 7,000 sti/min

· Stitch length: 0.6 ~ 3.8 (4.5) mm

· Needle gauge (mm): 2.0

· Needle bar stroke: 24.5mm(60H:27.0mm)

· Overedging width (mm): 2.0, 3.0, 4.0

· Differental Feed Ratio: For gathering 1:2 (Max. 1:4), For stretching 1:0.7 (Max. 1:0.6)

· Needle bar bushing: Lower bushing method

· Stitch adjusting method: By push-button

· One Elastic Metering Puller ¼” (Attachment for thread serger)

· Three LED-50 30” Machine Lights (Attachment for all above listed machines)

2.3. Installation

The contractor shall install three machines and attachments by 6 Dec 2019.

2.4. Training/Commercial Manual

The Contractor shall provide in person training of the proper use of machine upon delivery.

The Contractor shall provide a commercial manual which explains the operation and maintanance of items listed in section 2.2.1 above.

Statement of Work (SOW) Page 2 14 Mar 18