08 Statement of Work FAST Telops MW Imager .pdf

Statement of Work

For

Fast M3K Infrared Camera System

Title: FAST M3K Infrared Camera System

Document Date: 1/31/2023

This document covers the purchase, installation, service, warranty, training and commissioning of a FAST M3K Infrared Camera System to be implemented at the Air Force Institute of Technology (AFIT).

Scope: The purchase of the FAST M3K Infrared Camera System.

1.1 Background: The Telops FAST M3K Infrared Camera is a high-speed, multi-spectral, thermal imaging system that operates in the medium-wavelength infrared (MWIR) band. This camera, and its associated software, are a gigantic advancement in technology level compared to AFIT's current thermal imaging capabilities. MWIR spectral imagers are key for many remote sensing applications, including jet/scramjet combustion diagnostics and hypersonic vehicle plumes. Previous AFIT experiments in these areas have relied on instruments that are far slower, and incapable of measuring the fast reactions in combustion.

This new capability would be both advanced enough to enable new research, but also simple enough to use in ENP's OENG 616 lab. The streamlined software interface and intuitive built-in calibration will enable students to quite fighting against antiquated instruments and focus on learning the physics.

Although AFIT has for years enjoyed a reputation as the "go-to" government agency for sophisticated infrared spectroscopy measurements, AFIT lacks any capability that can compete with this instrument when it comes to combining speed (1,000 frames/sec at full VGA resolution) with spectral resolution (8 bands).

2. Applicable Documents: The following specification lists the minimum (threshold) requirements for this set of accessories:

1. Detector type InSb

2. Spectral range: 1.5 µm-5.5 µm

3. Spatial resolution: 640 x 512 pixels

4. Detector pitch: 25 µm

5. Frame rate (full frame with filter wheel): 800 Hz

6. Frame rate (64 x 8 sub frame): 40,000 Hz

7. Typical Noise Equivalent Temp Difference: 25 mK

8. Scene temperature range: Up to 1500 oC

9. Filter bands: 8

10. Operating temperature range: -15 oC to 50 oC

3. Requirements/Salient Characteristics:

4. Delivery/Period of Performance:

1. The vendor shall deliver and complete all requirements of this Statement of Work no later than 6 weeks after contract award.

2. Contractor shall be responsible for transportation of all new products, loading, unloading, storage and all necessary movement from factory to final onsite set up.

3. The contractor Project Manager shall be responsible for on-site coordination of all deliveries of their product, to include access to and operation of any equipment needed for unloading and movement of materials or product necessary to complete all requirements of this Statement of Work.

4. Free from defects in material and workmanship, under normal and proper use in accordance with equipment user manual, for the period of time of two year after receipt.

4.1 Place of Performance:

Air Force Institute of Technology (AFIT/EN) ATTN: Dr. Michael Dexter 2950 Hobson Way, Building, # Room # Wright-Patterson AFB, OH 45433-7765

4.2 Payment: 100% payment upon completion of all requirements specified in this Statement of Work. Payment shall be made on a net 30 basis. Invoices shall be submitted and paid through Wide Area Work Flow (https://wawf.eb.mil/).