Q and A 23 March 2022 Bldg 553 Rooms 020 070 092.pdf

DEPARTMENT OF THE AIR FORCE

AIR FORCE LIFE CYCLE MANAGEMENT CENTER (AFLCMC)

WRIGHT-PATTERSON AIR FORCE BASE OHIO

23 March 2022

FROM: AFLCMC/PZIBC

1940 Allbrook Drive, Room 109

Wright-Patterson AFB, OH 45433

SUBJECT: Response to Inquiries regarding FA8601-22-Q-0050

QUESTIONS

1. QUESTION: Can vendors use a substitute sound masking system other than Logison?

ANSWER: Yes.

2. QUESTION: Regarding items WS-1 through WS-4, D-2, T-1 through T-

8, and QL-1, would Thermally Fused Laminate with vinyl edge be acceptable?

ANSWER: The WS-1, WS-2, WS-3, WS-4 and D-2 work surfaces /returns work surface /credenza work surface: Wood Grain High Pressure Laminate Top with

Vinyl Edge is preferred.

Thermally Fused Laminate with vinyl edge is acceptable on the following door/drawer fronts; (full TFL chassis are acceptable)

WS-1, WS-3 Mobile Pedestal Box/File, (n/a for WS-2)

WS-4 Combo Lateral File w/ Box/Box File or Combo Lateral File w/

Box/Box/Door

D-2: Overhead Storage, Wardrobe File/File

QL-1

T-1 thru T-7 Wood Grain High Pressure Laminate Top with Vinyl Edge is preferred.

T-8 Wood Grain High Pressure Laminate Top with Vinyl Edge is preferred. Note:

T-8 table goes in the same office as the D-1 in room 020D. For material finish coordination purposes the D-1 and T-8 should come from the same manufacture.

3. Also, is item SC-3 a metal cabinet with a laminate top or a laminate cabinet?

ANSWER: The SC-3 is a metal cabinet with a laminate top.

KIRBY E. WILLIAMS

Contracting Officer

AFLCMC/PZIBC