CAPABILITIES_STATEMENT_FIBER_COLLIMATOR_SPECIFICATION.docx

CAPABILITIES STATEMENT: FIBER COLLIMATOR SPECIFICATION

Deliver 9 single mode Fiber as per following specifications:

Fiber Size and Type ASI9.0/125G single-mode gold coated fiber (1 each) SSTL reverse step Collimator Ferrule w/3.18mm sapphire half ball lens - 0.148”dia x 0.75”L distal body w/5mm dia flange and 1st End 1st End w/reverse step to 1/16” dia x 15” backbody (1 each) 2nd End bare fiber, cleaved and protruding from end of SSTL Capillary jacket ~6” (1 each)Jacket Notes 1/16” SSTL Capillary Tubing Overall Length 10 ft. OAL Minimize bending this assembly.

Maximum operating temperature of 1st End is 700ºC, decreasing to <200ºC within 15” of distal tip.

Deliver 9 Multi-mode Fiber as per following specifications:

High Temperature Fiber Collimator , 600°C Operating Temp Wavelength = 1350nm, Fiber NA = 0.22 Working distance = 60mm Housing OD 5.56mm [7/32”] Stainless steel w/ < 5.56 cap nut 300um core fiber, 6” nearest collimator end is gold coated;

remainder is polyimide coated; total 150ft length 1/16” OD SS tubing of 25ft jacket nearest collimator end, remainder is PVC-jacketed or similar; stress-relief provision at SS-PVC interface One SS-100-1-4BT swagelok fitting on stainless steel tubing, pipe-thread end faces collimator end SMA-905 connector on other end