CAPABILITIES_STATEMENT_FIBER_COLLIMATOR_SPECIFICATION.docx
DOCX document 14 KB Posted
- Attached to
- FIBER COLLIMATER
- Solicitation number
- FA8601-13-T-0070
About this file
CAPABILITIES STATEMENT
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 252.209-7997.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CAPABILITIES STATEMENT: FIBER COLLIMATOR SPECIFICATION
Deliver 9 single mode Fiber as per following specifications:
Fiber Size and Type ASI9.0/125G single-mode gold coated fiber (1 each) SSTL reverse step Collimator Ferrule w/3.18mm sapphire half ball lens - 0.148”dia x 0.75”L distal body w/5mm dia flange and 1st End 1st End w/reverse step to 1/16” dia x 15” backbody (1 each) 2nd End bare fiber, cleaved and protruding from end of SSTL Capillary jacket ~6” (1 each)Jacket Notes 1/16” SSTL Capillary Tubing Overall Length 10 ft. OAL Minimize bending this assembly.
Maximum operating temperature of 1st End is 700ºC, decreasing to <200ºC within 15” of distal tip.
Deliver 9 Multi-mode Fiber as per following specifications:
High Temperature Fiber Collimator , 600°C Operating Temp Wavelength = 1350nm, Fiber NA = 0.22 Working distance = 60mm Housing OD 5.56mm [7/32”] Stainless steel w/ < 5.56 cap nut 300um core fiber, 6” nearest collimator end is gold coated;
remainder is polyimide coated; total 150ft length 1/16” OD SS tubing of 25ft jacket nearest collimator end, remainder is PVC-jacketed or similar; stress-relief provision at SS-PVC interface One SS-100-1-4BT swagelok fitting on stainless steel tubing, pipe-thread end faces collimator end SMA-905 connector on other end
File details come from the government source that posted it. Updated .