Combined synopsis-Extr 002.pdf

This is a combined synopsis/solicitation for requires QTY: (30) Aluminum Lid Extrusions in 20

FT length sections, QTY: (50) Aluminum Post Extrusions in 20 FT length sections, and QTY:

(40) Aluminum Fork Well Extrusions in 20 FT length sections. This combined synopsis/solicitation was prepared in accordance with the format in Federal Acquisition

Requirements (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested, and a written solicitation will not be issued.

The solicitation number for this requirement is FA8601-12-T-0228 using FAR Subpart 13, Simplified Acquisition Procedures.

This solicitation document and incorporated provisions and clauses are those in effect through

Federal Acquisition Circular 2005-60, 26 July 2012.

This solicitation document is 100% Small Business Set-Aside under North American Industry

Classification System Code (NAICS) 331314. Size standard is 750 employees.

The AFLCMC/PKO Operational Contracting Division, Wright-Patterson Air Force Base, Ohio intends to award a firm-fixed-price contract for the following requirements:

Requirements for the Extrusions:

FAR 52.219-6, Notice of Total Small Business Set-Aside

QTY(30) Lid Extrusions:

Length: 20 Feet

Material: Aluminum 6063-T6 per ASTM B221M (4.33 Kg/M)

Specifications: See attached drawing No. 9095085, “Lid Extrusion”

Notes:

o Interpret drawing IAW MIL-STD-100 o Radii (R): 3.0mm, unless stated otherwise o Wall Thickness: 3.0mm, unless otherwise noted o Extrusion Tolerances IAW ANSI/AA H35.2(M), unless stated otherwise o All conversions from Metric to English shall be IAW ANSI/ASTM SI 10

Shipping: FOB: Destination

Payment: Net 30 days after receipt and acceptance of items

QTY(50) Post Extrusions:

Material: Aluminum 6063-T6 per ASTM B221M (1.56 Kg/M)

Specifications: See attached drawing No. 9095086, “Post Extrusion”

Notes:

o Interpret drawing IAW MIL-STD-100 o Radii (R): 3.0mm, unless stated otherwise o Wall Thickness: 3.0mm, unless otherwise noted o Extrusion Tolerances IAW ANSI/AA H35.2(M), unless stated otherwise o All conversions from Metric to English shall be IAW ANSI/ASTM SI 10

Shipping: FOB: Destination

Payment: Net 30 days after receipt and acceptance of items

QTY(40) Fork Well Extrusions:

Material: Aluminum 6063-T6 per ASTM B221M (6.55 LBS/FT)

Specifications: See attached drawing No. 8992269, “Forkwell Extrusion”

Notes:

o Interpret drawing IAW MIL-STD-100 o Radii (R): 3.0mm, unless stated otherwise o Wall Thickness: 3.0mm, unless otherwise noted o Extrusion Tolerances IAW ANSI/AA H35.2(M), unless stated otherwise o All conversions from Metric to English shall be IAW ANSI/ASTM SI 10

Shipping: FOB: Destination

Payment: Net 30 days after receipt and acceptance of items

Quotations need to adhere to FAR 52.212-1, Instructions to Offerors – Commercial; and include a completed FAR 52.212-3, Representations and Certifications. The Government’s preferred method is Online Representations and Certifications. In addition the reps and cert in FAR

52.212-3 fill-in must be completed and returned with quote. This can be accomplished by registering in SAM at https://sam.gov and completing the on-line Representations and

Certifications.

The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Technical

Capability and Price.

The quotations may be in any format but MUST include:

1) Proposing company’s name, address, Tax ID Number, Cage Code and phone

2) Point of contact’s name, phone, and email

3) Quotation number & date

4) Item price

5) Total price (Net 30)

6) Shipping (FBO: Destination)

7) Applicable discounts

8) Timeframe that the quote is valid

9) Delivery Schedule

10) Warranty Information (if applicable).

11) Completed FAR 52.212-3, Representations and Certifications

12) Completed DFARS 252.209-7999 https://sam.gov/

Quotations MUST also contain a complete description of item offered to clearly show item meets or exceeds the requirements listed above. The Contracting Officer will review quotations based on the factors listed in this solicitation and the information furnished by the offeror.

Before price is considered, the proposal must meet the technical capabilities.

IMPORTANT NOTICE TO CONTRACTORS: All prospective awardees are required to register at the System for Award Management (SAM) and to maintain active registration during the life of the contract. CCR can be accessed at https://www.sam.gov. Any award resulting from this solicitation will include DFARS Clause 252.232-7003, Electronic Submission of

Payment Requests. Section 1008 of the National Defense Authorization Act of Fiscal Year 2001 requires any claims for payment (invoices) under DoD contract to be submitted in electronic form. Wide area Workflow- Receipt and Acceptance (WAWF-RA) is the DoD system of choice for implementing this statutory requirement. Use of the basic system is at no cost to the contractor. Contractors must complete vendor training, which is also available at no cost at http://www.wawftraining.com. Prior to submitting invoices in the production system, contractors must register for an account at http://wawf.eb.mil/.

It is the offeror's responsibility to be familiar with the applicable clauses and provisions. Clauses and provisions in full text may be accessed via the Internet at website http://farsite.hill.af.mil.

The following provisions are incorporated by reference and apply to this acquisition:

FAR 52.212-1, Instructions to Offerors -- Commercial

FAR 52.212-2, Evaluation Factors [the fill in portion of this clause is: technical and price]

FAR 52.212-3, Representations and Certifications

The following clauses are incorporated by reference and apply to this acquisition:

FAR 52.212-4, Contract Terms and Conditions -- Commercial Items

FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive

Orders -- Commercial Items:

FAR 52.219-6, Notice of Total Small Business Set Aside

FAR 52.219-28, Post Award Small Business Program Representation

FAR 52.222-3, Convict Labor

FAR 52.222-19, Child Labor—Cooperation with Authorities and Remedies

FAR 52.222-21, Prohibition of Segregated Facilities

FAR 52.222-26, Equal Opportunity

FAR 52.222-36, Affirmative Action for Workers with Disabilities

FAR 52.222-50, Combating Trafficking in Persons

FAR 52.223-18, Encouraging Contractor Policies to Ban Text Messaging while

Driving

FAR 52.225-13, Restrictions on Certain Foreign Purchases https://www.sam.gov/ http://www.wawftraining.com/ http://wawf.eb.mil/ http://farsite.hill.af.mil/

FAR 52.232-33, Payment by Electronic Funds Transfer—Central Contractor

Registration

FAR 52.233-3, Protest After Award

FAR 52.233-4, Applicable Law for Breach of Contract Claim

DFARS 252.212-7001, Contract Terms and Conditions Required to Implement Statues or

Executive Orders—Commercial Items:

DFARS 252.203-7000, Requirements Relating to Compensation of Former DoD

Officials

DFARS 252.225-7001, Buy American Act and Balance of Payments Program

DFARs 252.232-7003 Electronic Submission of Payment Requests

DFARS 252.232-7006, Wide Area Workflow Payment Instructions

All quotations and responses must be received no later than Noon, Eastern Standard Time on

Thursday 30 August 2012. Submittal of quotes in response to this RFQ constitutes agreement by the offeror of all terms & conditions contained herein, which will also be the terms & conditions of resulting contract. Please email to Chad.Hines@wpafb.af.mil via a PDF compatible attachment or to:

AFLCMC/PKOAA

Attn: Chad Hines

1940 Allbrook Drive, Room 109

WPAFB, Ohio 45433-5344

Any questions should be directed to Chad Hines at Chad.Hines@wpafb.af.mil.

mailto:Chad.Hines@wpafb.af.mil mailto:Chad.Hines@wpafb.af.mil