SOW.pdf_-__-_05-06-2016.pdf

PR# FD2060-16-93558

STATEMENT OF WORK (SOW)

FOR

TCAS PROCESSOR SERVICE BULLETIN COMPLIANCE

FOR ROYAL NORWEGIAN AIR FORCE

C-130J AIRCRAFT

PR# FD2060-16-93558

CONTRACT # FA8553-16-R-93558

28 Apr 16

Russell Hokanson FMS Program Manager

AFLCMC/WLNID

DISTRIBUTION STATEMENT C: Distribution authorized to U.S. Government agencies and their contractors (Administrative or Operational Use: 04-01-23). Other requests for this document shall be referred to WR-ALC/GRBIB, Robins AFB GA 31098

TABLE OF CONTENTS

SECTION TITLE PAGE

SECTION 1 DESCRIPTION OF SERVICES 2

SECTION 2 SERVICES SUMMARY 2

SECTION 3 GOVERNMENT FURNISHED PROPERTY

AND SERVICES 2

SECTION 4 GENERAL INFORMATION 3

1.0 Description of Services:

1.1 Introduction: This Statement of Work (SOW) establishes the requirements for the Service Bulletin (SB) 940-0330-0430-34-02, Publication Number D201406000068 reconfigure/upgrade work on seven (7) TPA-100 MILACAS-XR Traffic Collision Avoidance System (TCAS) Processors, Part # 940-0330-001, for Royal Norwegian Air Force (RNoAF) C-130J program.

The TCAS Processor is standard equipment furnished on delivery of the aircraft. The SB requirement is mandated by European Air Control to improve flight safety in the European airspace. The work is to be accomplished at the Service Provider’s (SP) Facility.

1.2 Scope: The SP shall be responsible for all aspects involved in the service bulletin compliance on the seven (7) processors to bring them up to the new TCAS 7.1 mandated standard and will include all hardware and software changes to reconfigure the processors and deliver them as revised Part # 940-0331-001 per SB. Upgraded assets will ship back to the designated freight forwarder facility.

2.0 Services Summary

2.1 Perform all requirements of SB D201406000068. If necessary, provide any additional estimated repair requirements to USG Program Manager (PM) and USG Contracting Officer for review and approval via the Over and Above CLIN.

2.2 Upgrade the processors in accordance with Honeywell SB D201406000068 and any additional technical requirements to the TCAS 7.1 specifications.

2.3 Test processors in accordance with Honeywell SB D201406000068 to ensure they meet final specifications.

2.4 Provide Honeywell test reports and other necessary documentation in accordance with Honeywell SB D201406000068 with each upgraded processor to show compliance with the SB.

2.5 Change all processor labels in accordance with Honeywell SB D201406000068 to show new part number configuration.

2.6 Ship upgraded processors to the designated freight forwarder facility.

3.0 Government Furnished Property and Services

RNoAF TCAS processors will be shipped in as GFP for Honeywell to perform the SB and return the TCAS processors to Norway’s freight forwarder as identified in the shipping instructions.

The GFP is listed in Attachment 1, Scheduled Government Furnished Property.

4.0 General Information:

4.1 Service Provider Support: The SP shall provide highly skilled technician(s) capable of performing the requirements of this SOW.

4.2 Reports: The SP shall provide updates or changes to production schedule via email to the USG Program Manager and USG Contracting Officer within 14 days of discovery.

4.3 Security Requirements: Classification and Position Sensitivity Designation. As a minimum, a National Agency Check is required for all personnel and will be conducted in accordance with DoD5200.2-R. No classified information will be accessed

4.7 SP Provided Tools. The SP shall provide all special tools and test equipment.

4.8 Technical Data: Production shall conform to the SPs production drawings and specifications, service bulletin requirements and any other applicable Technical Orders (TO) and Directives.

4.9 Environmental. The contractor shall follow all environmental laws, regulations, guidance and instructions.

4.9.1 Environmental Management System. The contractor must follow EMS standards as applicable to their SP.

4.9.2 The contractor has to follow mandatory U.S Federal acquisition Green Procurement Programs for orders placed in the U.S.

4.10 Travel and per diem - Not applicable

4.11 The Contractor shall use the Defense Contract Management Agency (DCMA) eTools software application for reporting loss of Royal Norwegian Air Force Government property.