Statement of Work_ ProX 950 Laser Replacement.pdf

PDF 155 KB Posted Jun 20, 2024

Attached to: Sole Source ProX Laser Replacement
Solicitation number: FA822724R2285
Issued by: Department of the Air Force Materiel Command Air Force Sustainment Center

About this file

Written by GovTribe AI · Jun 20, 2024

This document is a Statement of Work (SOW) for the replacement of the right side UV laser on a 3D Systems ProX 950 laser printer used by the U.S. Air Force 309th Maintenance Support Group (MXSG) at Hill AFB, UT. The contractor shall be responsible for procuring a new laser, installing it, upgrading the software to Windows 10 or later, and calibrating the machine to OEM standards. All work shall be performed on-site at Hill AFB.

The related federal contract opportunity, Solicitation Number FA822724R2285, is a Request for Quote (RFQ) issued as a sole source award to 3D Systems, Inc. for the ProX 950 laser replacement. The Government anticipates a firm fixed price contract with delivery within 60 days after receipt of order. Proposals are due by 4:00 PM MST on July 1, 2024. The contract will be awarded based on price, meeting specifications, and timely performance.

View the file

Other files

File	Type	Posted
Single Source Justification_ProX 950 Laser Replacement_Redacted.pdf	PDF	Jun 20, 2024

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

STATEMENT OF WORK (SOW)

3D SYSTEMS PROX 950 LASER REPLACEMENT

U.S AIR FORCE

309TH MAINTENANCE SUPPORT GROUP (MXSG)

[Taylor Gittins]

5/22/2024

3D Systems ProX 950 Laser Replacement

1 BACKGROUND

1.1 Reverse Engineering, Advanced Manufacturing, Prototyping, Innovation Design (RAPID’s) Innovation Center at Hill AFB, UT has a requirement for the repair of their 3D Systems ProX 950. The ProX 950 is used to produce aircraft part prototypes and fit checks. It is also used to produce tooling, fixtures, and dies for aircraft. The 3D printer’s right side UV laser is currently not functioning as determined by OEM technician. OEM has recommended replacement of the 3D printers right side UV laser to bring the equipment to fully functional.

2 SCOPE

2.1 Contractor shall be responsible for procuring a new laser for the ProX 950, installation of laser in machine, and calibration of machine to OEM standards. The contractor shall upgrade software to Windows 10 or later.

3 TASK OUTLINE

3.1 Procurement of New Laser

3.1.1 The contractor shall provide a new, fully functional right hand UV laser for the ProX 950 equivalent to current right hand UV laser that meets all OEM specifications.

3.2 Install New Laser

3.2.1 All work shall be performed onsite at Hill AFB, Ut

3.2.2 The contractor shall remove and dispose of faulty right hand UV laser.

3.2.3 Contractor shall install new right hand UV laser per OEM specifications. To bring the Pro X 950 back to fully operational standards.

3.2.4 The contractor shall update the machine software to Windows 10 or newer

3.3 Calibrate New Laser

3D Systems ProX 950 Laser Replacement

3.3.1 Once installed to the Pro X 950, the contractor shall calibrate the new laser to OEM standards.

3.3.2 Prior to departure from Hill AFB, and after all other tasks have been completed the contractor shall run a test print to demonstrate for the 809 MXSS/MXDTAD representative the new laser and machine are fully operational.

4 GENERAL INFORMATION

4.1 Hours of Operation

4.1.1 Normal Hours of Operation: The contractor shall perform the services required under this contract during the following hours: Monday through Friday 0700-1600 – EXCEPT FEDERAL HOLIDAYS and other base closures.

4.1.2 Delivery Address:

ATTN: Taylor Gittins 5925 Southgate Ave.

Bldg. 205, Room 2

HILL AFB, UT 84056

Email address for electronic delivery:

taylor.gittins@us.af.mil

1 bACKGROUND