Structured Light Scanner 8-9-2022.pdf

PURCHASE DESCRIPTION

FOR

Structured Light Measurement System

August 9, 2022

5925 Southgate Ave

BLDG. 205

ATTN: Taylor Gittins

HILL AFB UT 84056

1.0. DESCRIPTION OF REQUIREMENTS

In order to provide the highest quality of service and reverse engineering support to our Air force users. The RAPID innovation center requires the purchase of a Structured Light measurement system, to collect geometric measurements and develop tools for use in common operations at Hill AFB. The scanning system will primarily be used in support of small aircraft parts and operated in a typically office environment. Specific requirements are listed below. Technically acceptable quotes will include all equipment, tools, and software required for full use of this measurement system.

1.1. ACCESSORIES AND SPECIFICATIONS

The Structured Light measurement system needs to meet the following:

• Programmable inspection program to allow for repeated measurement plans

• Utilization of structured light

• Capable of measuring small to large parts (interchangeable lenses)

• Interchangeable lens measuring volumes to include:

o 100 x 70 x 60 mm o 170 x 130 x 130 mm o 270 x 200 x 200 mm o 350 x 260 x 260 mm o 500 x 370 x 320 mm

• Minimum accuracy equal to or better than ±20μm

• Collect 10 Million points per scan or more

• Able to scan reflective and highly contoured parts

• Memory capability to store and recall previous measurements

• Rotary tool to scan various sides of part

• Light weight less than 15lbs and able to be moved and used in various locations

• Included carrying case and portable tri-pod or equivalent mounting method

• Include both manual mode and fully automated mode

• Included software or built in capability

• Automatic calibration. All required tools for calibration must be included.

• If software is required to operate machine, included software must be compatible with windows 10 or newer

• Complete training for a minimum of 5 individuals. Training must be over use of the machine and any required software

• If control unit is required it must meet the following minimum requirements o 64GB Ram o 1TB Hard Disk o Windows 10 or newer (compatible with scanner) o Quadro NVIDIA graphic card

1.2. CONTRACTUAL REQUIREMENTS

1.2.1. Delivery

The contractor shall deliver the equipment to the following address located at Hill Air Force Base:

809TH MXSS/MXDTAD

5925 Southgate Ave Bldg. 205 Attn: Taylor Gittins Hill AFB UT 84056-5825

1.2.2. Warranty

The contractor shall provide a minimum 1 year warranty which warrants all products provided under this contract, under normal use, free from defects in materials and workmanship and that system will perform its design function for a period of no less than one (1) year. Warranty period to start from date of final acceptance. Any defects in materials or workmanship or failure of any product or component to perform its designed function during the warranty period shall be fixed by the contactor at no additional cost to the Government.