Product Description 4 Nov 2019.pdf

PRODUCT DESCRIPTION (PD)

LEAD ANODES FOR PLATING

U.S AIR FORCE

309 COMMODITIES MAINTENANCE GROUP (CMXG)

11/7/2019

Lead Anodes for Plating i

TABLE OF CONTENTS

1 Description Of Product

2 Fabrication Specifcations

2.1 Table 1: Anode List 10-10-2019

3 Basic services

4 Ship to:

5 Warranty:

1 DESCRIPTION OF PRODUCT

This product description covers the design and fabrication of conforming lead anodes to be used in plating operations at 309 CMXG at Hill Air Force Base. The contractor shall use the

Government engineering drawings in fabrication of anodes unless otherwise approved. If the contractor has similar anodes, the contractor shall provide engineering drawings to the

Government for approval before fabrication of the anodes.

Fabrication of anodes to be used in AMS 2460 and MIL-STD-1501 chrome plating operations at

Hill AFB, UT. Section 2.1, Table 1 below gives an overview of the parts, features, anode drawing numbers, and number of anodes to be fabricated. It also indicates whether or not the

Government will provide the mold to the contractor for anode fabrication purposes:

2 FABRICATION SPECIFCATIONS

2.1 Table 1: Anode List 11-7-2019

2.1.1 6-8% Antimony lead alloy required for all anodes per MIL-STD-1501.

2.1.2 Anodes must be able to meet AMS 2460 and MIL-STD 1501 chrome plating standards.

2.1.3 The contractor shall use the provided government engineering drawings in fabrication of anodes unless otherwise approved by the Government 532 CMMXS Engineer.

Deviations from flame spray, plastisol, or other requirements on anodes are allowed.

Provide brief explanation of alternative lead adhesion approach.

Part # PART FEATURE DRAWING #

NUMBER

REQUESTED

Mold

Provided?

17P2C1037 MLG POST 16 THIN BAND X201225485 1 no

* MLG POST 16 WIDE AND MIDDLE BAND X201225115 1 no

* MLG POST 20 OD X201225485 1 no

* MLG POST 14 AND 15 X201415013 REV C 1 yes

17P2C1047 MLG POST SWIVEL #6 IDS X200825636 1 no

* MLG POST SWIVEL #10 FACES X200825622 1 no

* MLG POST SWIVEL #11 ID AND ASSOCIATED 13 FACE X200825641 1 no

* MLG POST SWIVEL #12 ID AND ASSOCIATED 13 FACE X200825642 1 yes

17P2C1119 MLG SINGLE VERTICAL BRACE 1 ID & 2 FACES X200732681 1 yes

* MLG SINGLE VERTICAL BRACE 3 ID and 4 FACES X201225181 1 yes

5-68457 B-52 MLG Steering Plates Chrome Plate I.D. & Faces X201025134-REV-D 3 no

3162677-2 A-10 VALVE BODY ID X200110925 30 yes

17P2C1110 MLG V Brace Assy, Vertical Features 1 &2 X200732632 1 no

* MLG V Brace Assy, Vertical Features 3 & 4 X200732631 Rev B 1 no

17P2C1115 V-Brace Assy, Upper, MLG Features 1 & 2 X200732659 1 no

* V-Brace Assy, Upper, MLG Features 3 & 4 X200732658 1 no

25-4204-4 B-52 M Inner Seal X200532907 1 yes

7531263-10 KC-135 N Piston Inner Seal X9036558 4 yes

1881B77-01, 1881B77-11 B-1 Trunion Spindle ID 200027034 1 yes

17P2C1490 Draglink #3,4,5 & 7 X200825497 Rev B 1 yes

2.1.4 The contractor shall obtain Government POC approval before an anode is fabricated by an alternative approach.

2.1.5 All labor, fabrication material, crating and shipping shall be included.

3 BASIC SERVICES

3.1 The contractor shall provide the manufacturing engineering drawings of the anodes to the Government 532 CMMXS Engineer for approval prior to fabrication, unless

Government engineering drawings are used (CDRL A001).

3.2 After drawings are approved by Government 532 CMMXS Engineer, the contractor shall fabricate the anodes in accordance with the approved drawings.

4 SHIP TO:

Delivery shall be made to the following address located on Hill AFB Utah 84056:

309 CMXG

5760 Southgate Ave Building 505

Hill AFB, UT 84056

5 WARRANTY:

The contractor shall provide a standard commercial warranty.

ATTACHMENTS:

Drawings Attached