Questions and Answers on CNC Machines.docx

DOCX document 13 KB Posted

Attached to
CNC 48" Lathe and CNC Vertical Machining Center Federal contract opportunity
Solicitation number
FA8224-09-R-0110
Issued by
Department of the Air Force Materiel Command Lifecycle Management Center Hill Air Force Base

About this file

From the source

Questions and Answers on the CNC 48 inch lathe and CNC Vertical Milling Center

View the file

Other files for this federal contract opportunity

Other files attached to CNC 48" Lathe and CNC Vertical Machining Center, newest first.
File Type Posted
Sol amendment R-0110-0003.doc DOC document
Purch Spec - F2DCBL9031A001 - Lathe.doc DOC document
Sol FA8224-09-R-0110.doc DOC document
Purch Spec - F2DCBL9031A002 - Milll.doc DOC document

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Questions and Answers on CNC Machines 1 Question on the NOTE below the control specs. Are you asking to run a Mazatrol or EIA/ISO (G-code) program on another suppliers machine? The NOTE is not specific and certainly if you wanted to run a Mazatrol program on another suppliers machine this could not happen, therefore making this a single source bid.

Answer: Most of our work is done through EIA/ISO (G-code) and we would like to be able to take programs that we already have existing and be able to move from machine to machine, depending on availability, without much additional time to the operator. Also when we take it from the drawing software to machine code(compile the code) we will not need to incur any additional equipment/cost to the government to perform these tasks.

What we are looking for is if you are quote using an equivalent controller, that you provide enough information on how they are equivalent (not identical) and that the government is not going to be required to buy new hardware or software to implement and support this equipment. In addition, we will not be required to move projects from machine to machine.

Dan Wilder Contract Negotiator

OO-ALC / PKESA

Tel. No. :(801) 586-7933

File details come from the government source that posted it. Updated .