RFI MJMS Engineering Final.pdf

Request for Information (RFI)

July 18, 2025

PURPOSE

The Air Force Life Cycle Management Center’s (AFLCMC) through the Control and Reporting Center (CRC) Program Management Office (PMO), is looking for the MIDS/JTRS Mobile System (MJMS) Transit Case and the Ancillary Rack of the AN-TSC-250(V)1 to be reverse engineered.

Background:

The CRC Command and Control (C2) Communication Data Link System (CDLS) MJMS is currently at a depot level of repair. The CRC PMO is looking for a Technical Data Package to be created for the purpose of going to an organic maintenance stance.

DESCRIPTION

Requirements and Specifications:

1. Technical Data Package requirements need to meet or exceed the following:

• Level 3 TDP

• 2D- (CAD native files w/output to PDF flat drawings)

• Drawing Tree of the MJMS

• Top Level Assembly Drawing (referencing other drawings created, vendor PNs, mounting hardware)

• Wiring Diagram/Interconnect Diagram

• Subassembly drawings o Cables o Interface panel o Cooling tray

• Control Drawing o Laptop o UPS o Network Switch o Fan Tray Assemble o MIC/MAC o Power supplies o MIDS/JTRS o Remote power Supply

• Technical Order content must be written to a scope and depth of coverage to support the CRC Command and Control (C2) Communication Data Link System (CDLS) MJMS operations and maintenance concepts. Commercial Manual Ratings for commercial manuals submitted for use by USAF will be evaluated using MIL-PRF-32216 and MIL-DTL-7700.

2. Reports that would be required will include but not limited to:

• Special Packaging Instructions

• Technical Data Package

• Product Design Data and Associated Lists

• Conceptual Design Data

• Developmental Design Data and Associated Lists

• Commercial Design Data and Associated Lists

• Special Inspection Equipment Design Data and Associated Lists

• Special Tooling Design Data and Associated Lists

• Source Control Approval Request

• Document Number Assignment Report

• Required Mfg. Process Description Approval Request

• Software Version Description (SVD)

• Software Documentation

• Engineering Drawing Tree

• Technical Data Package List

• Acquisition and Sustainment Data Package (ASDP) Engineering Design Data and Associated

Lists (EDDAL)

• Required Manufacturing Process Description for Additive Manufacturing

• Commercial Off-The-Shelf (COTS) Manuals and Associated Supplemental Data

Period of Performance: 180 Days AOR

REQUESTED RFI RESPONSE

Interested parties are requested to respond to this RFI by: 21 Aug 2025

Send responses to Wendy Farley, Contracting Officer, wendy.farley@us.af.mil and Mitchell Gooslin, Contracting Specialist, mitchell.gooslin@us.af.mil.

Hard copy submittals are not required. If late information is received, it may not be considered by the USG reviewers, depending on agency time constraints. Please note: the USG is not required to provide feedback to RFI Responders. RFI responses shall be submitted in 8.5 x 11-inch page format using Times New Roman 12-point font using Microsoft Word or searchable Adobe Acrobat Portable Document Format. The responder may use oversized pages where appropriate to contain graphic presentations.

Responses shall be limited to 10 pages, Existing commercial documentation and product literature may also be submitted and is not included in 10 page maximum.

Responses must be unclassified, and any proprietary information provided must be marked accordingly.

To protect such data, each line or paragraph on the pages containing such data must be specifically identified and marked with a legend similar to the following:

“The following contains proprietary information that (name of Responder) requests not be released to persons outside the USG, except for the purposes of review and evaluation.”

DISCLAIMER

This is a Request for Information (RFI) only as defined in FAR 15.201(e) to obtain information about capabilities and market information. This RFI is not a request for competitive proposals; therefore, responses to this notice are not considered offers and cannot be accepted by the USG to form a binding contract. Companies that respond will not be paid for the information submitted. No telephone calls will be accepted requesting a bid package or solicitation.