1377155airspec.doc

AIRMUNITION SPECIFICATION

FD2020-13-77155

NSN: 1377014866045ES, 13774969700ES, 137701487014870148ES, 1377014871952ES

Revised 2-11-2014

1. Contractor shall contact their nearest Defense Contract Management Agency (DCMA) Office for transportation guidance and assistance for all Foreign Military Sales (FMS) deliveries prior to shipment: and insure that the DCMA provides one information copy of completed Notice of Availability (NOA) including FMS case and requisition numbers: OO-ALC/GHGJ attn: FMS Transportation by mail to 6043 Elm Lane, Hill AFB, UT 84056-5819, Fax to: (801) 777-1089 or Email: 784 CBSG Transporttation@hill.af.mil.

2. DODIC Number: WB40,WB41, WB41,WB46

3. Ammunition lot numbering shall be accomplished. Reference MIL-STC-1168 for guidance.

4. Ammunition Data Cards (ADC) shall be filled out; input in accordance with Attachment 2, Statement of Work – Ammunition Data Cards; and state quantity/serial number of lot acceptance test units in the remarks block (DI-MISC-80043).

5. Serial numbers are required for each item.

6. Items shall be marked using accepted practices for marking (referencesMIL-STD-130 for guidance).

Minimum item marking shall include Government/ Manufacture Part Number, Lot number of lot acceptance test units in the remarks block. CDRL (DI-MISC-80043).

7. The vendor shall serialize items sequentially for this &each) part number. Do not repeat serial numbers unless approved by the government. Serial numbers shall be a minimum of digits.

8. Items shall be marked in accordance with CAD/PAD Item Marking Instruction Version 1.1, 01 May 2008, Attachment .

9. NSN: 1377014869700ES, 1377014866045ES, 1377014870148ES, 1377014871952ES

Hazard Class Division: 1.1D Storage Compatibility Group: D DOT Marking: Aircraft Panel Assembly. Aft, (FEDS) C-17 DOD Class: 1.1D DOT Label: Explosive 1.1D UN Serial Number: 0408 UN Proper Shipping Name: Fuzes, Detonating, with Protective Features

10. (PLEASE NOTE: THE SECTION ABOVE PERTAINS TO EXPLOSIVE AND HAZARDOUS ITEMS ONLY. PLEASE INITIAL FOR CONCURRENCE WITH HAZARD CLASSIFICATION

DATA LISTED IN BLOCK. SAFETY TO CONTACT ES IF ANY DISCREPANCIES NOTED.)

11. Contracts involving ammunition and explosives (AE) will contain:

-DFARS Title 48 Part 252.223-7002, Safety Precautions for Ammunition and Explosives.

-DFARS Title 48 Part 252.223-7003, Change in place of Performance- Ammunition and Explosives.

12. Additionally, if the scope of work includes air shipment of explosives, the safety specification should require contractor compliance with:

-AFMAN 24-204(I), Preparing Hazardous Materials for Military Air Shipments.

13. All Engineering Change Proposals (ECP’s) Notice of Revisions (NOR), Requests for Deviations RFD/RFWs affecting the approved product baseline configuration, acceptance test procedures, or manufacturing process of any item(s) on this contract shall be in accordance with MIL-STD-973. .RFDs shall be processed as RFDs in accordance with MIL-STD-(&# Class I ECPs with NORS and Major/Critical RFDs shall be submitted to the responsible Government Engineering Authority for review/disposition by CCB. Class II ECPs with NORs and Minor RFDs shall be processed by the:

COGNIZANT GOVERNMENT ENGIEER

ECPs-CDRL (DI-SESS-81880) RDFs-CDRL (DI-SESS-81883)

14. Item(s) must pass both gross and fine leak checks. MIL-STD-883, Method 1014.13 may be used as guidance. The existing leak rate limit established for this item(s) will remain the same. Contractor shall generate a Lot Acceptance Test Plan (LATP/ATP) with an analysis or test results showing compliance for Hill AFB engineering approval at least 90 days prior to commencement of Lot Acceptance Testing allowing for 30 days approval time after submission.

CDRL (DI-QCIC-80553).

15. If Hexanitrostilbene (HNS) explosive materials used in the manufacture of this item, the HNS shall meet the requirements of Government Document WS5003F (or latest revision), Purchase Description of HNS Explosive; and maximum particle size shall not exceed 250 microns.

16. Lot Acceptance Test requirements are: Per latest government approval ATP.

17. The contractor shall furnish a Lot Acceptance Test/Inspection Report, (DI-NDTI-80809).

18. LOT ACCEPTANCE TEST: In the event of an end item failure, the contractor shall notify the PCO/ACO and Air Force Engineering Organization within 1 business day. Email.Kurt.erickson@hill.af.mil

19. In the event of test failure(s) a Failure Analysis and Corrective action Report with proposed corrective /recommendations is required. CDRL: (DI-SESS-81315).

20. The of the energetic materials and components (i.e. ALL explosive, propellants, pyrotechnics, cartridges, and/or initiators) used in the manufacture of these items or sub-components shall not exceed 24 months based on the original manufacturing date. All energetic materials and components must be traceable to the original DoD qualified manufacturer and compliant with the ITAR part 120 and 121.

(http://www.pmddtc.state.gov/regulations_laws/itar.htm1). Raw (non-blended)

Ingredients & materials used in blended/mixed energetic materials such as, but not limited to: fuels, oxidizers, binders, curatives, sensitizers, plasticizers, stabilizers ect., shall not 24 months since date of manufacture and comply with original manufacture’s Specification or MIL-STD. The government may waive the energetic and constituent material requirements listed above or portions thereof, on a case-by-case basis (when acceptable to the government) provided the contractor furnishes all details of the reason for the waiver and the age, lot numbers, traceability, and other pertinent information/ test data and Certificate of Analysis/ Conformance (COA/COC) of the subject materials or components. The wavier shall be submitted as a RFD and may be subject to, but not limited to, conditions such as sensitivity testing , stabilizer and analysis and/or dehumidification at vendor’s cost; therefore, vendor must plan accordingly.

21. Percussion primers shall have been certified /recertified by performing sensitivity (all-fire/no fire) and dud testing per applicable specification within the past 12 months unless they are Navy certified and have a 2 year certification . Primers shall be stored in a temperature and humidity controlled environment and in a sealed container with desiccant from time of primer manufacturing, shipping, storage and through final installation in end item.

22. This item is designated as a Critical Safety Item (CSI). Documentation for critical characteristics may be found in the contract, TDP, assembly /inspections procedures or QALI. Other characteristics requiring inspection or special oversight from DCMA: