FA821308R3010.pdf
PDF 303 KB Posted
- Attached to
- Ammunition and Explosives
- Solicitation number
- FA8213-07-Q-3010
About this file
Copy of original solicitation
View the file
Other files
| File | Type | Posted |
|---|---|---|
| EngineeringDataList.pdf | ||
| WAWF.doc | DOC document | |
| STATEMENTOFWORK_ADC.pdf | ||
| DISESS81315.pdf | ||
| DIMISC80043A.pdf | ||
| DINDTI80809B.pdf | ||
| RESHIP.pdf | ||
| SourceQualification.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
1447-101 STANDARD FORM 1447 (5-88)
Prescribed by GSA FAR (48 CFR 53.215-1(g))
SOLICITATION/CONTRACT
BIDDER/OFFEROR TO COMPLETE BLOCKS 11, 13, 15, 21, 22, & 27.
J
1. THIS CONTRACT IS A RATED ORDER
UNDER DPAS (15 CFR 350)
RATING
DO: A6
2. CONTRACT NO.
3. AWARD/EFFECTIVE DATE
4. SOLICITATION NUMBER
FA8213-08-R-3010
5. SOLICITATION TYPE
SEALED BIDS NEGOTIATED
(IFB) (RFP)
6.SOLICITATION ISSUE DATE
31 MAR 2008
X
7. ISSUED BY CODE
DEPARTMENT OF THE AIR FORCE, 784 COMBAT SUSTAINMENT GROUP
784 CBSG PK
6050 GUM LANE BLDG 1215
HILL AIR FORCE BASE UT 84056-5825
BUYER: Merrill Stoddard merrill.stoddard@hill.af.mil
Phone: (801) 777- 0134 Fax: (801) 777-5840 No Collect Calls
FA8213 8. THIS ACQUISITION IS
UNRESTRICTED LABOR SURPLUS AREA CONCERNS
SET ASIDE: % FOR COMBINED SMALL BUSINESS &
LABOR SURPLUS AREA CONCERNS
SMALL BUSINESS Oth Than Full & Open
NAICS CODE: 332993 SIZE STANDARD: 1,500
X
9.
Solicitation: Offers will be received at the Issuing office until * on * . Late offers are subject to late proposal provisions incorporated herein.
All offers are subject to such provisions, representations certifications and specifications as are attached or incorporated by reference.*
20-MAY-2008 2:00PM
10. ITEMS TO BE PURCHASED (BRIEF DESCRIPTION)
SUPPLIES SERVICES Ammunition (except Small Arms) Manufacturing X
11. IF OFFER IS ACCEPTED BY THE GOVERNMENT WITHIN * ___ CALENDAR DAYS (60 CALENDAR
DAYS UNLESS OFFEROR INSERTS A DIFFERENT PERIOD) FROM THE DATE SET FORTH IN BLK 9
ABOVE, THE CONTRACTOR AGREES TO HOLD ITS OFFERED PRICES FIRM FOR THE ITEMS
SOLICITED HEREIN AND TO ACCEPT ANY RESULTING CONTRACT SUBJECT TO THE TERMS AND
CONDITIONS STATED HEREIN. *90
12. ADMINISTERED BY CODE
13. CONTRACTOR OFFEROR CODE FACILITY CODE
14. PAYMENT WILL BE MADE BY CODE
(SEE ESP CLAUSE 252.232-7003.)
15. PROMPT PAY DISCOUNT
16. AUTHORITY FOR USING OTHER THAN 10 USC 2304 41 USC 253
FULL AND OPEN COMPETITION (c) (1 ) (c) ( )
17.
ITEM NO.
18.
SCHEDULE OF SUPPLIES/SERVICES
19.
QUANTITY
20.
UNIT
21.
UNIT PRICE
22.
AMOUNT
23. ACCOUNTING AND APPROPRIATION DATA
SEE SCHEDULE
24. AWARD AMOUNT (FOR GOVT USE ONLY)
25. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN 1 COPIES TO ISSUING
OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS SET
FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY CONTINUATION SHEETS SUBJECT
THE TERMS AND CONDITIONS SPECIFIED HEREIN. X
26. AWARD OF CONTRACT: YOUR OFFER ON SOLICITATION NUMBER
SHOWN IN BLOCK 4 INCLUDING ANY ADDITIONS OR CHANGES
WHICH
ARE SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:
27. SIGNATURE OF OFFEROR/CONTRACTOR
NAME AND TITLE OF SIGNER (TYPE OR PRINT)
28. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)
NAME OF CONTRACTING OFFICER
DATE SIGNED DATE SIGNED
THIS IS AN EXTREMELY URGENT REQUIREMENT CONCERNING PUBLIC EXIGENCY.
Subject to the terms and conditions stated herein, the Contractor agrees to hold its offered prices firm for 90 days.
THIS ACQUISITION IS RESTRICTED TO QUALIFIED SOURCES; A QUALIFICATION PACKAGE IS REQUIRED FOR NEW SOURCES. SEE FAR CLAUSE 52.209-1 FOR QUALIFICATION REQUIREMENTS. PROPOSALS WILL NOT BE CONSIDERED IF A QUALIFICATION PACKAGE IS NOT SUBMITTED BEFORE/OR WITH THE PROPOSAL AND
ACCEPTED BY THE AIR FORCE ENGINEER.
SEE LINE ITEM SCHEDULE
X
SCD:C
CHECK IF REMITTANCE IS DIFFERENT
AND PUT SUCH ADDRESS IN OFFER SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK: 14
Total
SF 1447 (5-88) BACK
CANNOT MEET DELIVERY REQUIREMENT
OTHER (Specify)
NO RESPONSE FOR THE REASONS CHECKED
WE DO
WE DO NOT DESIRE TO BE RETAINED ON THE MAILING LIST FOR FUTURE PROCUREMENT OF THE TYPE OF
ITEMS INVOLVED
NAME AND ADDRESS OF FIRM (Include Zip Code) SIGNATURE
TYPE OR PRINT NAME AND TITLE OF SIGNER
FOLD
SOLICITATION NO. FA821308R3010
DUE: 20 MAY 2008 2:00 PM
FROM: AFFIX
STAMP
HERE
TO:
ATTN: Merrill Stoddard
DEPARTMENT OF THE AIR FORCE, 784 COMBAT SUSTAINMENT GROUP
784 CBSG PK
6050 GUM LANE BLDG 1215
HILL AIR FORCE BASE UT 84056-5825
CANNOT COMPLY WITH SPECIFICATIONS
CANNOT COMPLY WITH SPECIFICATIONS
Request for Proposal FA8213-08-R-3010
PART I - THE SCHEDULE
SECTION B
SUPPLIES OR SERVICES AND PRICES/COSTS
Item No.
NSN: 1325-01-394-1858
CASE ASSEMBLY,BOMB
CASE ASSEMBLY,BOMB|BLU-113 BOMB FOR THE GBU-28 SYSTEM|LARC-MY38|PACS|EMPTY CASE FOR THE
BLU-113 BOMB
APPL: INERT BOMB FOR GBU-28 NHA: GBU-28 DODIC: MY38
Manufacturer Part Number 3D8M1 9331412-001 Priority: C THIS IS AN EXTREMELY URGENT REQUIREMENT CONCERNING PUBLIC EXIGENCY.
Limitations of Liability: Other Than High Value Item
Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required
Quality Assurance: Standard Inspection
New Material, Surplus Not Acceptable Buy American Act/Balance of Payments Program Physical Item Markings:
IAW MIL-STD-130
Class I ODS Substance Application/Use Quantity
None None None
Reference Informational CLIN 0001
Case Assembly
0001AA
Firm Fixed Price Quantity U/I Unit Price Amount
32 EA
CLIN ACRN ACRN Total
0001AA AA
NSN: 1325-01-394-1858
CASE ASSEMBLY,BOMB
CASE ASSEMBLY,BOMB|BLU-113 BOMB FOR THE GBU-28 SYSTEM|LARC-MY38|PACS|EMPTY CASE FOR THE
BLU-113 BOMB
Inspection/Acceptance Report: Receiving Report Required
Quality Assurance: Standard Inspection
Buy American Act/Balance of Payments Program
Transportation From Continental United States CONUS (CONUS) Sources
TYPE / SHIP TO CODE F.O.B.
C FY8742 ORIGIN
Type / Ship To PACRN Mark For
C FY8742 PAA ACCT 06
Type / Ship To Quantity (U/I) On or Before _ Req No / Pri Required Delivery
C FY8742 32 EA
25 AUG 2008 FW202673522052 / PRI:
Proposed
C FY8742 32 EA
0001AB
18 EA
0001AB AC
NSN: 1325-01-394-1858
CASE ASSEMBLY,BOMB
CASE ASSEMBLY,BOMB|BLU-113 BOMB FOR THE GBU-28 SYSTEM|LARC-MY38|PACS|EMPTY CASE FOR THE
BLU-113 BOMB
Inspection/Acceptance Report: Receiving Report Required
C FY8742 PAA ACCT 06
Type / Ship To Quantity (U/I) On or Before _ Req No / Pri
C FY8742 18 EA
C FY8742 18 EA
0001AC
10 EA
0001AC AB
NSN: 1325-01-394-1858
CASE ASSEMBLY,BOMB
CASE ASSEMBLY,BOMB|BLU-113 BOMB FOR THE GBU-28 SYSTEM|LARC-MY38|PACS|EMPTY CASE FOR THE
BLU-113 BOMB
C FY8742 PAA ACCT 06
Type / Ship To Quantity (U/I) On or Before _ Req No / Pri
C FY8742 10 EA
C FY8742 10 EA
1 LO Not Separately
Priced Not Separately Priced
DATA
IAW DD FORM 1423
Inspection/Acceptance: IAW DD Form 1423-1 Purchase Request(s) PR Line Item(s)
FD20200877093 01 0002
Priority: R ROUTINE
Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required
Exhibit: A
SHIP TO / PLACE OF PERFORMANCE
TYPE/CODE: C FY8742
Mcalester Army Ammo Plant AF Munitions Site Mcalester OK 74501
MARK FOR: (See Individual Line Item) REQUISITION NUMBER: (See Individual Line Item) REQUISITION PRIORITY: (See Individual Line Item)
AWARD NUMBER:
Transportation Funding: MORD: F2DCAE6306MP03 AB
MORD: LOA: 5773011 H87 47E3 353020 000000 00000 000000 503000 F03000
Early delivery is acceptable at no addtional cost to the government.
SECTION C
DESCRIPTION/SPECIFICATIONS/STATEMENT OF WORK
252.211-7005 SUBSTITUTIONS FOR MILITARY OR FEDERAL SPECIFICATIONS AND STANDARDS
(NOV 2005)
(IAW DFARS 211.273-4)
(b) Offerors are encouraged to propose SPI processes in lieu of military or Federal specifications and standards cited in the solicitation. A listing of SPI processes accepted at specific facilities is available via the Internet at http://guidebook.dcma.mil/20/guidebook_process.htm (paragraph 4.2).
(d) (Offeror insert information for each SPI process)
SPI Process: _____________________________________________________
Facility: _________________________________________________________
Military or Federal Specification or Standard: ____________________________
Affected Contract Line Item Number, Subline Item Number, Component, or Element:
SECTION D
PACKAGING AND MARKING
http://guidebook.dcma.mil/20/guidebook_process.htm
ITEM IDENTIFICATION MARKING AND SHELF LIFE ITEM PROVISIONS (FEB 1998)
(IAW AFMCI 23-102 Chapter 6 Paragraph 6.2.7.3.)
Requirements set forth below shall apply to any contract issued thereon and will take precedence over other inconsistent requirements herewith. All standards, bulletins, and publications referenced herein shall be of the issue in effect on the date of this document.
1. PHYSICAL MARKING OF ITEMS:
MIL-STD-130: Items shall be marked in accordance with MIL-STD-130. The National Stock Number (NSN), and when assigned, the Configuration Item Identifier (CII), serial number, and military type designation information shall be marked on major assemblies, units, groups, and sets. Special attention must be given to requirements governing the application of the actual manufacturer's Federal Supply Code for Manufacturers (FSCM) to the physical item.
Items which are excluded in accordance with paragraph 1.1 of MIL-STD-130, Revision M, shall be marked in accordance with the appropriate document.
2. PACKAGE AND CONTAINER MARKING: Shipments will not be made until the NSN has been assigned, unless specifically authorized by the Contracting Officer.
MIL-STD-129/ASTM-D-3951:
a. Interior packages and shipping containers shall be marked in accordance with MIL-STD-129 when Military packing is specified and ASTM-D-3951 when commercial packaging is specified. The requirements of paragraph 2.h apply regardless of which packaging is utilized.
(1) Design manufacturer's name, trademark or manufacturer's code (from Cataloging Handbook H4-1 or H4-2), identifying number, and serial number, when applicable, shall be included in the identification marking.
(2) When applicable, the Air Force project designator code shall be included as the last line of the address marking and the project name related to the project code shall be marked in the clear on the exterior shipping container.
b. Tags and labels, when required, shall be contractor's tags or labels conforming to the requirements of MIL-STD-129 or as approved by the procuring activity. Contractor's forms which indicate serviceable condition shall not be any shade of green or red. Labels are authorized to be used on metal containers.
Items requiring technical order (T.O.) certification shall be annotated on inner and outer container tags or label with T.O. compliance.
c. When dummy containers are used in a unitized load, the dummy containers shall be clearly marked "DUMMY CONTAINER" and located in the load so that the marking will be plainly visible to receiving and storage personnel.
d. All interior packages and shipping containers for articles and materials classified as hazardous or restricted under provisions of Title 49, Code of Federal Regulations, or AFR 71-4/DLAM 4145.3/TM 38-250/NAVSUP PUB 505/MCO P 4030.19 shall be marked, regardless of exemption for mode of transportation, with proper shipping name of item; flash point of all liquids having a flash point of 200 degrees F. or below; and percentage concentration of acids and corrosive liquids. In addition, the quantity of each hazardous or restricted material included in a container shall be annotated adjacent to the shipping name of the item, e.g., Acetic Acid (80% concentration) -- 1 qt.
e. On shipments of firearms regardless of mode of transportation, selected elements of identification and contractor data markings shall be omitted or obliterated in accordance with the requirements of MIL-STD-129 regarding sensitive items and packing lists shall be placed only inside the containers.
f. Special markings for packages and containers when specified on AFMC Form 158 shall be complied with as a part of MIL-STD-129.
g. All special coated terneplate containers shall be marked with the legend "CAUTION--DO NOT REUSE AS
FOOD CONTAINERS."
h. Bar code markings in accordance with MIL-STD-129 shall apply to all units, intermediate and exterior containers for all items going into stock regardless of package size or levels of package specified (including commercial packaging). In addition to the NSN/NATO stock number, the exterior shipping container shall include the 13 digit contract number (plus, if applicable, the four digit call number). Excluded from Bar Code Marking are:
(1) Foreign Military Sales.
(2) Direct Vendor Delivery (DVD)/Government Furnished Equipment (GFE) shipments.
(3) Multipack Exterior Shipping Containers. (Unit and intermediate containers do require a bar coded NSN/NATO stock number. However, the next container (unit or intermediate) inside the multipack will also require a bar coded NSN/NATO stock number and contract number with call number, if applicable, in the lower right hand corner).
(4) All unpacked or uncrated items; e.g., vehicles, tires, etc.
i. Shipments of wheeled items weighing 2,000 pounds or more and scheduled for transportation by military aircraft will be marked with the individual axle weights in accordance with MIL-STD-129.
3. WARRANTED ITEMS: When the contract contains warranty requirements, warranty information shall be applied on containers and items as follows:
a. Container markings shall be as specified in MIL-STD-129. The period or conditions of the warranty shall be specifically stated, i.e., landings, flight hours, operating hours, days from shipping date, etc.
b. Items shall be marked in accordance with requirements of MIL-STD-130. Markings shall be located in a manner so as to be conspicuous to the person removing the item from service. When no deleterious effect or functional degradation is caused, the markings shall be black letters on yellow FED-STD-595 color 13655) background. The marking shall include the same period or condition required on the containers.
4. SHELF LIFE ITEMS
a. MARKING
(1) Shelf life items shall be marked in accordance with MIL-STD-129.
(2) Mark items controlled in MIL-STD-1523, or in specifications furnished as a part of the contract or purchase order, with the cure or assembly dates specified therein.
b. DELIVERY. Unless specified otherwise in the contract, shelf life items shall have a minimum of 90% of the "storage period" remaining at the time of delivery to the Government.
5352.247-9005 SHIPPING CONTAINER MARKING (AFMC) (MAR 2003)
(IAW AFMCFARS 5347.305-10(a)(91), AFMCFARS 5347.305-10(a)(93), AFMCFARS 5347.305-10(a)(94), AFMCFARS 5347.305-10(a)(95))
(a) MIL-STD-129 P
(b) MIL-STD-129 P
(c) Additional marking and/or bar coding requirement exceeding those of Mil-STD-129 P
All shipping containers shall be marked using the following criteria:
PACRN(s) Applicable to 5352.247-9005
Additional Bar Coding or Marking Requirements
PAA Not Applicable
5352.247-9009 MILITARY PACKAGING AND MARKING (AFMC) (AUG 2002)
(IAW AFMCFARS 5347.305-10(a)(95)) Items shall be packaged in accordance with MIL-STD-2073-1 D , Standard Practice for Military Packaging. Shipping and storage markings shall be in accordance with MIL-STD-129 P , Standard Practice for Military Marking.
The MIL-STD-2073-1 SPI/Specification is as follows:
PACRN PRESERVATION
LVL
PACKING
LVL
QUP SPI NUMBER SPI
REVISION
SPI DATE
PAA MIL B 001
PACRN SUPPLEMENTAL PACKAGING
PAA
5352.247-9011 PACKAGING AND MARKING OF HAZARDOUS MATERIAL (AFMC) (SEP 1998)
(IAW AFMCFARS 5347.305-10(a)(97))
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT
(FEB 2007)
(IAW AFMC FORM 158)
All wooden lumber, wooden pallets, and wooden containers produced entirely or in part of solid wood packing material (SWPM) shall be constructed from heat-treated (HT) material (HT 56 degrees centigrade or 133 degrees Fahrenheit for 30 minutes). Certification/marking is required by an accredited agency recognized by the American Lumber Standards Committee (ALSC). For reference documentation, see “International Standards for Phytosanitary Measures (ISPM) No. 15.” This document can be found at www.ippc.int .
SECTION E
INSPECTION AND ACCEPTANCE
52.246-2 INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)
(IAW FAR 46.302)
52.246-16 RESPONSIBILITY FOR SUPPLIES (APR 1984)
(IAW FAR 46.316)
252.246-7000 MATERIAL INSPECTION AND RECEIVING REPORT (MAR 2008)
(IAW DFARS 246.370)
INSPECTION AND ACCEPTANCE (SEP 1999)
(IAW FAR 46.401(b), FAR 46.503)
Government Contract Quality Assurance Inspection and Acceptance will be at (Final):
[CONTRACTOR FILL-IN]
Item No(s): See schedule for items with the following code(s) listed below :
Inspection Code and Address:
Government Contract Quality Assurance Inspection and Acceptance will be at destination(s) specified herein (Final).
Item No(s): 0002
SECTION F
DELIVERIES OR PERFORMANCE
http://www.ippc.int/
52.211-8 TIME OF DELIVERY (JUN 1997)
(IAW FAR 11.404(a)(2)) DELIVERY FOR EACH ITEM IS ANNOTATED IN THE SCHEDULE (PART I SECTION B) UNDER EACH LINE
ITEM.
52.211-17 DELIVERY OF EXCESS QUANTITIES (SEP 1989)
(IAW FAR 11.703(b))
52.242-15 STOP-WORK ORDER (AUG 1989)
(IAW FAR 42.1305(b)(1))
52.242-17 GOVERNMENT DELAY OF WORK (APR 1984)
(IAW FAR 42.1305(c))
52.247-29 F.O.B. ORIGIN (FEB 2006)
(IAW FAR 47.303-1(c))
52.247-30 F.O.B. ORIGIN, CONTRACTOR'S FACILITY (FEB 2006)
(IAW FAR 47.303-2(c))
52.247-34 F.O.B. DESTINATION (NOV 1991)
(IAW FAR 47.303-6(c))
52.247-48 F.O.B. DESTINATION--EVIDENCE OF SHIPMENT (FEB 1999)
(IAW FAR 47.305-4(c))
Applicable Item No(s)
52.247-57 TRANSPORTATION TRANSIT PRIVILEGE CREDITS (APR 1984)
(IAW FAR 47.305-13(b)(4))
(d) The rate per CWT quoted will be used by the Government to evaluate the offered f.o.b. origin price unless a lower rate is applicable on the date of bid opening (or closing date specified for receipt of offers). To have the offer evaluated on this basis, the offeror must insert below the remaining transportation charges that the offeror agrees to pay, including any transit charges, subject to reimbursement by the Government, as explained in this clause, to destinations listed in the Schedule as follows:
RATE PER CWT IN CENTS ____________________
TO DESTINATION ____________________________
52.247-58 LOADING, BLOCKING, AND BRACING OF FREIGHT CAR SHIPMENTS (APR 1984)
(IAW FAR 47.305-15(a)(2))
52.247-59 F.O.B. ORIGIN-CARLOAD AND TRUCKLOAD SHIPMENTS (APR 1984)
(IAW FAR 47.305-16(a))
52.247-60 GUARANTEED SHIPPING CHARACTERISTICS (DEC 1989)
(IAW FAR 47.305-16(b)(1))
(a) The offeror is requested to complete subparagraph (a)(1) of this clause, for each part or component which is packed or packaged separately. This information will be used to determine transportation costs for evaluation purposes. If the offeror does not furnish sufficient data in subparagraph (a)(1) of this clause, to permit determination by the Government of the item shipping costs, evaluation will be based on the shipping characteristics submitted by the offeror whose offer produces the highest transportation costs or in the absence thereof, by the Contracting Officer's best estimate of the actual transportation costs. If the item shipping costs, based on the actual shipping characteristics, exceed the item shipping costs used for evaluation purposes, the Contractor agrees that the contract price shall be reduced by an amount equal to the difference between the transportation costs actually incurred, and the costs which would have been incurred if the evaluated shipping characteristics had been accurate.
(1) To be completed by the offeror:
(i) Type of container: Wood Box [ ], Fiber Box [ ], Barrel [ ], Reel [ ], Drum [ ], Other (Specify)_________;
(ii) Shipping configuration: Knocked-down [ ], Set-up [ ], Nested [ ], Other (specify)
(iii) Size of container: " ____” (Length), x ____" (Width), x ____" (Height) = ____ Cubic Ft;
(iv) Number of items per container ________Each;
(v) Gross weight of container and contents ______Lbs
(vi) Palletized/skidded [ ]Yes [ ] No;
(vii) Number of containers per pallet/skid ______;
(viii) Weight of empty pallet bottom/skid and sides ____________Lbs;
(ix) Size of pallet/skid and contents _______ Lbs Cube ________;
(x) Number of containers or pallets/skids per railcar __________*--
Size of railcar _____________ Type of railcar _____________
(xi) Number of containers or pallets/skids per trailer __________*-- Size of trailer______________ FT Type of trailer______________
*Number of complete units (contract line item) to be shipped in carrier's equipment.
(2) To be completed by the Government after evaluation but before contract award:
(i) Rate used in evaluation * ;
(ii) Tender/Tariff ** ;
(iii) Item *** ;
*Rate **Tender ***Item No
0001AA
0001AB
0001AC
52.247-61 F.O.B. ORIGIN-MINIMUM SIZE OF SHIPMENTS (APR 1984)
(IAW FAR 47.305-16(c))
52.247-65 F.O.B. ORIGIN, PREPAID FREIGHT--SMALL PACKAGE SHIPMENTS (JAN 1991)
(IAW FAR 47.303-17(f))
9952.247-9000 COMMERCIAL BILL OF LADING SHIPMENTS - CARRIER'S RATES (JALC)
(MAR 2003)
(IAW JALC 9947.104-4(90))
9952.247-9014 UNILATERAL AMENDED SHIPPING INSTRUCTIONS (ASIs), F.O.B. ORIGIN (JALC)
(IAW JALC 9947.305-10(b)(90))
F.O.B. ORIGIN (OCT 1993)
(IAW FAR 47.305(b)) Any supply item applicable to this document shall be delivered F.O.B. at:
F.O.B. Address
[CONTRACTOR FILL-IN]
SECTION G
CONTRACT ADMINISTRATION DATA
9952.232-9002 TRANSPORTATION APPROPRIATION CHARGEABLE (JALC) (MAR 2003)
(IAW JALC 9932.705(90))
Insert last digit of current fiscal year in place of any asterisk "*" shown when material is shipped.
TAI ATAC FMS ALLOTMENT /NOTE
TAA
TAC
TAC
TAB
TAC
PART II - CONTRACT CLAUSES
SECTION I
CONTRACT CLAUSES
5352.201-9101 OMBUDSMAN (AUG 2005)
(IAW AFFARS 5301.9103)
(c) If resolution cannot be made by the contracting officer, concerned parties may contact the Center/MAJCOM ombudsmen, Julie Primbs at 801 777 -0768 , FAX 801 777 -6830 , email julie.primbs@hill.af.mil .
Concerns, issues, disagreements, and recommendations that cannot be resolved at the MAJCOM/DRU level, may be brought by the concerned party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number
(703) 588-7004, facsimile number (703) 588-1067.
52.202-1 DEFINITIONS (JUL 2004)
(IAW FAR 2.201)
52.203-3 GRATUITIES (APR 1984)
(IAW FAR 3.202)
52.203-5 COVENANT AGAINST CONTINGENT FEES (APR 1984)
(IAW FAR 3.404)
52.203-6 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT (SEP 2006)
(IAW FAR 3.503-2)
52.203-7 ANTI-KICKBACK PROCEDURES (JUL 1995)
(IAW FAR 3.502-3)
52.203-8 CANCELLATION, RESCISSION, AND RECOVERY OF FUNDS FOR ILLEGAL OR
IMPROPER ACTIVITY (JAN 1997)
(IAW FAR 3.104-9(a))
52.203-10 PRICE OR FEE ADJUSTMENT FOR ILLEGAL OR IMPROPER ACTIVITY (JAN 1997)
(IAW FAR 3.104-9(b))
52.203-12 LIMITATION ON PAYMENTS TO INFLUENCE CERTAIN FEDERAL TRANSACTIONS
(SEP 2007)
(IAW FAR 3.808(b))
252.203-7001 PROHIBITION ON PERSONS CONVICTED OF FRAUD OR OTHER
DEFENSE-CONTRACT-RELATED FELONIES (DEC 2004)
(IAW DFARS 203.570-3)
252.203-7002 DISPLAY OF DOD HOTLINE POSTER (DEC 1991)
(IAW DFARS 203.7002)
52.204-4 PRINTED OR COPIED DOUBLE-SIDED ON RECYCLED PAPER (AUG 2000)
(IAW FAR 4.303)
52.204-7 CENTRAL CONTRACTOR REGISTRATION (JUL 2006)
(IAW FAR 4.1104)
252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992)
(IAW DFARS 204.404-70(b))
252.204-7004 ALTERNATE A, CENTRAL CONTRACTOR REGISTRATION (SEP 2007)
(IAW DFARS 204.1104)
252.205-7000 PROVISION OF INFORMATION TO COOPERATIVE AGREEMENT HOLDERS
(DEC 1991)
(IAW DFARS 205.470)
52.209-1 QUALIFICATION REQUIREMENTS (FEB 1995)
(IAW FAR 9.206-2)
(b)
Item No Agency Name/Address
(c) If an offeror, manufacturer, source, product or service covered by a qualification requirement has already met the standards specified, the relevant information noted below should be provided.
Offeror's Name _____________________________
Manufacturer's Name ________________________
Source's Name _____________________________
Item Name _________________________________
Service Identification _________________________
Test Number _______________________________ (to the extent known)
52.209-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH
CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT
(SEP 2006)
(IAW FAR 9.409(b))
252.209-7004 SUBCONTRACTING WITH FIRMS THAT ARE OWNED OR CONTROLLED BY THE
GOVERNMENT OF A TERRORIST COUNTRY (DEC 2006)
(IAW DFARS 209.409)
52.211-5 MATERIAL REQUIREMENTS (AUG 2000)
(IAW FAR 11.304)
52.211-15 DEFENSE PRIORITY AND ALLOCATION REQUIREMENTS (SEP 1990)
(IAW FAR 11.604(b))
This is a rated order certified for national defense use, and the Contractor shall follow all the requirements of the Defense Priorities and Allocations System regulation (15 CFR 700).
252.211-7003 ITEM IDENTIFICATION AND VALUATION (JUN 2005)
(IAW DFARS 211.274-5(a), DFARS 212.301(f)(vi))
(a) Definitions. As used in this clause—
“DoD recognized unique identification equivalent” means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/UID/equivalents.html .
“Unique item identifier type” means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/UID/uid_types.html .
(c) DoD unique item identification or DoD recognized unique identification equivalents.
(1) The Contractor shall provide DoD unique item identification, or a DoD recognized unique identification equivalent, for—
(i) All delivered items for which the Government’s unit acquisition cost is $5,000 or more; and
(ii) The following items for which the Government’s unit acquisition cost is less than $5,000:
Contract Line, Subline, or Exhibit Line Item Number
Item Description
*Items less than $5000, which require UID, will be specifically identified in the schedule.
See Schedule as Applicable
(iii) Subassemblies, components, and parts embedded within delivered items as specified in Attachment Number (See Schedule as Applicable).
(3) (i)(C) Text Element Identifiers (TEIs), in accordance with the DoD collaborative solution “DD” format for use until the final solution is approved by ISO/IEC JTC1 SC 31. The “DD” format is described in Appendix D of the DoD Guide to Uniquely Identifying Items, available at http://www.acq.osd.mil/dpap/UID/guides.htm ;
and
(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause in accordance with the data submission procedures at http://www.acq.osd.mil/dpap/UID/DataSubmission.htm .
52.215-2 AUDIT AND RECORDS--NEGOTIATION (JUN 1999)
(IAW FAR 15.209(b)(1))
52.215-8 ORDER OF PRECEDENCE--UNIFORM CONTRACT FORMAT (OCT 1997)
(IAW FAR 15.209(h))
52.215-14 INTEGRITY OF UNIT PRICES (OCT 1997)
(IAW FAR 15.408(f)(1))
52.215-14 INTEGRITY OF UNIT PRICES -- ALTERNATE I (OCT 1997)
(IAW FAR 15.408(f)(2))
252.215-7004 EXCESSIVE PASS-THROUGH CHARGES (APR 2007)
(IAW DFARS 215.408(3))
52.219-8 UTILIZATION OF SMALL BUSINESS CONCERNS (MAY 2004)
(IAW FAR 19.708(a))
52.219-9 SMALL BUSINESS SUBCONTRACTING PLAN (NOV 2007)
(IAW FAR 19.708(b)(1))
52.219-9 SMALL BUSINESS SUBCONTRACTING PLAN -- ALTERNATE II (OCT 2001)
(IAW FAR 19.708(b)(1)) http://www.acq.osd.mil/dpap/UID/equivalents.html http://www.acq.osd.mil/dpap/UID/uid_types.html http://www.acq.osd.mil/dpap/UID/guides.htm http://www.acq.osd.mil/dpap/UID/DataSubmission.htm
52.219-16 LIQUIDATED DAMAGES--SUBCONTRACTING PLAN (JAN 1999)
(IAW FAR 19.708(b)(2))
52.219-28 POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (JUN 2007)
(IAW FAR 19.308(d))
(g) If the Contractor does not have representations and certifications in ORCA, or does not have a representation in ORCA for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:
The Contractor represents that it [ ] is, [ ] is not a small business concern under NAICS Code _____________ assigned to contract number ______________________________.
[Contractor to sign and date and insert authorized signer's name and title].
252.219-7003 SMALL BUSINESS SUBCONTRACTING PLAN (DoD CONTRACTS) (APR 2007)
(IAW DFARS 219.708(b)(1)(A))
9952.219-9000 INCORPORATION OF SUBCONTRACTING PLAN (JALC) (MAR 2003)
(IAW JALC 9919.705-5(a)) In accordance with FAR 52.219-9, Small Business Subcontracting Plan, the subcontracting plan contained in
* dated * is incorporated herein by reference.
*Incorporation of Subcontracting Plan
Location of Plan Date of Plan
52.222-1 NOTICE TO THE GOVERNMENT OF LABOR DISPUTES (FEB 1997)
(IAW FAR 22.103-5(a))
52.222-19 CHILD LABOR--COOPERATION WITH AUTHORITIES AND REMEDIES (FEB 2008)
(IAW FAR 22.1505(b))
52.222-20 WALSH-HEALEY PUBLIC CONTRACTS ACT (DEC 1996)
(IAW FAR 22.610)
52.222-21 PROHIBITION OF SEGREGATED FACILITIES (FEB 1999)
(IAW FAR 22.810(a)(1))
52.222-26 EQUAL OPPORTUNITY (MAR 2007)
(IAW FAR 22.810(e))
52.222-35 EQUAL OPPORTUNITY FOR SPECIAL DISABLED VETERANS, VETERANS OF THE
VIETNAM ERA, AND OTHER ELIGIBLE VETERANS (SEP 2006)
(IAW FAR 22.1310(a)(1), DFARS 222.1310(a)(1))
52.222-36 AFFIRMATIVE ACTION FOR WORKERS WITH DISABILITIES (JUN 1998)
(IAW FAR 22.1408(a))
52.222-37 EMPLOYMENT REPORTS ON SPECIAL DISABLED VETERANS, VETERANS OF THE
VIETNAM ERA, AND OTHER ELIGIBLE VETERANS (SEP 2006)
(IAW FAR 22.1310(b))
52.222-39 NOTIFICATION OF EMPLOYEE RIGHTS CONCERNING PAYMENT OF UNION DUES
OR FEES (DEC 2004)
(IAW FAR 22.1605)
52.222-50 COMBATING TRAFFICKING IN PERSONS (AUG 2007)
(IAW FAR 22.1705(a))
52.223-6 DRUG-FREE WORKPLACE (MAY 2001)
(IAW FAR 23.505)
52.223-11 OZONE-DEPLETING SUBSTANCES (MAY 2001)
(IAW FAR 23.804(a))
(b) The Contractor shall label products which contain or are manufactured with ozone-depleting substances in the manner and to the extent required by 42 U.S.C. 7671j(b), (c), and (d) and 40 CFR Part 82, Subpart E, as follows:
WARNING
Contains (or manufactured with, if applicable) ________________________*, a substance(s) which harm(s) public health and environment by destroying ozone in the upper atmosphere.
*The Contractor shall insert the name of the substance(s).
5352.223-9000 ELIMINATION OF USE OF CLASS I OZONE DEPLETING SUBSTANCES (ODSs)
(APR 2003)
(IAW AFFARS 5323.804(c))
(c) The requiring activity has obtained SAO approval to permit the contractor to use the following Class I ODS(s).
[List each Class I ODS, its applications or use and the approved quantities for use throughout the length of the contract. If "None," so state.]
Item No Class I ODS Application or Use Quantity (lbs) per contract period performance
SEE LINE ITEM SCHEDULE
52.225-13 RESTRICTIONS ON CERTAIN FOREIGN PURCHASES (FEB 2006)
(IAW FAR 25.1103(a))
252.225-7001 BUY AMERICAN ACT AND BALANCE OF PAYMENTS PROGRAM (JUN 2005)
(IAW DFARS 225.1101(2))
252.225-7002 QUALIFYING COUNTRY SOURCES AS SUBCONTRACTORS (APR 2003)
(IAW DFARS 225.1101(3))
252.225-7006 QUARTERLY REPORTING OF ACTUAL CONTRACT PERFORMANCE OUTSIDE THE
UNITED STATES (MAY 2007)
(IAW DFARS 225.7204(c))
252.225-7011 RESTRICTION ON ACQUISITION OF SUPERCOMPUTERS (JUN 2005)
(IAW DFARS 225.7012-3)
252.225-7012 PREFERENCE FOR CERTAIN DOMESTIC COMMODITIES (MAR 2008)
(IAW DFARS 225.7002-3(a))
252.225-7013 DUTY-FREE ENTRY (OCT 2006)
(IAW DFARS 225.1101(4))
252.225-7014 PREFERENCE FOR DOMESTIC SPECIALTY METALS (JUN 2005)
(IAW DFARS 225.7002-3(b)(1))
252.225-7014 PREFERENCE FOR DOMESTIC SPECIALTY METALS (DEVIATION) (JAN 2008)
(IAW DAR Tracking Number 2008-O0002)
(a) Definitions. As used in this clause—
(1) “Produce” means the application of forces or processes to a specialty metal to create desired physical properties through quenching or tempering of steel plate, or gas atomization or sputtering of titanium.
(2) “Specialty metal” means—
(i) Steel—
(A) With a maximum alloy content exceeding one or more of the following limits:
manganese, 1.65 percent; silicon, 0.60 percent; or copper, 0.60 percent; or
(B) Containing more than 0.25 percent of any of the following elements: aluminum, chromium, cobalt, molybdenum, nickel, niobium (columbium), titanium, tungsten, or vanadium;
(ii) Metal alloys consisting of—
(A) Nickel or iron-nickel alloys that contain a total of alloying metals other than nickel and iron in excess of 10 percent; or
(B) Cobalt alloys that contain a total of alloying metals other than cobalt and iron in excess of 10 percent;
(iii) Titanium and titanium alloys; or
(iv) Zirconium and zirconium alloys.
(b) Any specialty metal delivered under this contract shall be melted or produced in the United States or its outlying areas.
252.225-7014 PREFERENCE FOR DOMESTIC SPECIALTY METALS -- ALTERNATE I (DEVIATION)
(JAN 2008)
(IAW DAR Tracking Number 2008-O0002)
As prescribed in 225.700x-5(b), substitute the following paragraphs (a) and (b) for paragraphs (a) and (b) of the basic clause and add the following paragraphs (c) and (d) to the basic clause:
(a) Definitions. As used in this clause—
(1) “Assembly” means an item forming a portion of a system or subsystem that can be provisioned and replaced as an entity and which incorporates multiple, replaceable parts.
(2) “Commercial derivative military article” means an item procured by the Department of Defense that is or will be produced using the same production facilities, a common supply chain, and the same or similar production processes that are used for the production of articles predominantly used by the general public or by nongovernmental entities for purposes other than governmental purposes.
(3) “Commercially available off-the-shelf item”—
(i) Means any item of supply that is—
(A) A commercial item;
(B) Sold in substantial quantities in the commercial marketplace; and
(C) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and
(ii) Does not include bulk cargo, as defined in section 3 of the Shipping Act of 1984 (46 U.S.C. App.
1702), such as agricultural products and petroleum products.
(4) “Component” means any item supplied to the Government as part of an end item or of another component.
(5) “Electronic component” means an item that operates by controlling the flow of electrons or other electrically charged particles in circuits, using interconnections of electrical devices such as resistors, inductors, capacitors, diodes, switches, transistors, or integrated circuits.
(6) “End item” means the final production product when assembled or completed, and ready for issue, delivery, or deployment.
(7) “Produce” means the application of forces or processes to a specialty metal to create desired physical properties through quenching or tempering of steel plate, or gas atomization or sputtering of titanium.
(8) “Qualifying country” means any country listed in subsection 225.872-1(a) or (b) of the Defense Federal Acquisition Regulation Supplement (DFARS).
(9) “Required form” means in the form of mill product, such as bar, billet, wire, slab, plate or sheet, and in the grade appropriate for the production of—
(i) A finished end item delivered to the Department of Defense; or
(ii) A finished component assembled into an end item delivered to the Department of Defense.
(10) “Specialty metal” means—
(i) Steel—
(A) With a maximum alloy content exceeding one or more of the following limits:
manganese, 1.65 percent; silicon, 0.60 percent; or copper, 0.60 percent; or
(B) Containing more than 0.25 percent of any of the following elements: aluminum, chromium, cobalt, molybdenum, nickel, niobium (columbium), titanium, tungsten, or vanadium.
(ii) Metal alloys consisting of—
(A) Nickel or iron-nickel alloys that contain a total of alloying metals other than nickel and iron in excess of 10 percent; or
(B) Cobalt alloys that contain a total of alloying metals other than cobalt and iron in excess of 10 percent;
(iii) Titanium and titanium alloys; or
(iv) Zirconium and zirconium base alloys.
(11) “Subsystem” means a functional grouping of items that combine to perform a major function within an end item, such as electrical power, attitude control, and propulsion.
(b) Except as provided in paragraph (c) of this clause, any specialty metals incorporated in items delivered under this contract shall be melted or produced in the United States, its outlying areas, or a qualifying country, except for—
(1) Electronic components;
(2) (i) Commercially available off-the-shelf (COTS) items; other than—
(A) COTS fasteners, unless such fasteners are incorporated into COTS end items, subsystems, assemblies, or components.
(B) Forgings or castings of specialty metals, unless such forgings or castings are incorporated into COTS end items, subsystems, or assemblies.
(C) Commercially available high performance magnets, unless such high performance magnets are incorporated into COTS end items or subsystems;
(ii) A COTS item is considered to be “offered without modification” as long as it is not modified prior to contractual acceptance by the next higher tier in the supply chain.
(A) Specialty metals contained in a COTS item that was accepted without modification by the next higher tier are excepted and remain excepted even if a piece of the COTS item subsequently is removed (e.g., the end is removed from a COTS screw or an extra hole is drilled in a COTS bracket).
(B) For specialty metals that were not contained in a COTS item upon acceptance, but are added to the COTS item after acceptance, the added specialty metals are subject to the restrictions (e.g., a special reinforced handle made of specialty metal that is added to a COTS item).
(C) If two or more COTS items are combined in such a way that the resultant item is not a COTS item, only the specialty metals involved in joining the COTS items together are subject to the restrictions (e.g., a COTS aircraft is outfitted with a COTS engine, but not a
COTS engine normally provided with that aircraft.)
(D) For COTS items that are normally sold in the commercial marketplace with various options, items that include such options are also COTS items. However, if a COTS item is offered to the Government with an option that is not normally offered in the commercial marketplace, that option is subject to the specialty metals restrictions. (e.g., An aircraft is normally sold to the public with an option for several different radios. DoD requests a military-unique radio. The aircraft is still a COTS item, but the military-unique radio is not a COTS item, and must comply with the specialty metals restrictions, unless another excerption applies.)
(3) Fasteners that are commercial items that are purchased under a contract or subcontract with a manufacturer of such fasteners, if the manufacturer has certified that it will purchase, during the relevant calendar year, an amount of domestically melted specialty metal, in the required form, for use in the production of fasteners for sale to the Department of Defense and other customers, that is not less than 50% of the total amount of the specialty metal that it will purchase to carry out the production of such fasteners for all customers.
(4) Items manufactured in a qualifying country;
(5) Items for which the Government has determined in accordance with 225.700x-3 of Class Deviation 2008-O0002 that specialty metal melted or produced in the United States cannot be acquired as and when needed in—
(i) A satisfactory quality;
(ii) A sufficient quantity; and
(iii) The required form.
(6) Specialty metals, other than specialty metals in high performance magnets, that do not meet any of the exceptions in paragraphs (b)(1) through (5) of this clause, if the total weight of such noncompliant metals does not exceed 2 percent of the total weight of specialty metals in the item, as estimated in good faith by the Contractor.
(c) (1) Streamlined compliance for commercial derivative military articles. As an alternative to the compliance required in paragraph (b) of this clause, the Contractor may purchase an amount of domestically melted specialty metals in the required form, for use during the period of contract performance in the production of the commercial derivative military article and the related commercial article, In the amount determined in accordance with paragraph (c)(2) of this clause if—
(i) This is an acquisition of commercial derivative military articles; and
(ii) The Contractor has certified in its offer in accordance with paragraph (c)(2) of this clause.
(2) Certification for streamlined compliance for commercial derivative military articles (to be submitted with offer when applicable). The offeror [ ] certifies [ ] does not certify that prior to award it will have entered into a contractual agreement or agreements to purchase an amount of domestically melted or produced specialty metal in the required form for use during the period of contract performance in the production of the commercial derivative military article and the related commercial article, that is not less than the Contractor’s good faith estimate of the greater of—
(i) An amount equivalent to 120% of the amount of specialty metal that is required to carry out the production of the commercial derivative military article (including the work performed under each subcontract); or
(ii) An amount equivalent to 50% of the amount of specialty metal that is purchased by the contractor and its subcontractors for use during such period in the production of the commercial derivative military article and the related commercial article.
(3) For the purposes of the certification in paragraph (c)(2) of this clause, the amount of specialty metal that is required to carry out the production of the commercial derivative military article includes specialty metal contained in any item, including commercially available off-the-shelf items, incorporated into such commercial derivative military article.
(d) Unless the Contractor has certified in accordance with paragraph (c), the Contractor shall insert the substance of this clause, excluding paragraph (c) but including this paragraph (d), in all subcontracts for articles containing specialty metals.
252.225-7015 RESTRICTION ON ACQUISITION OF HAND OR MEASURING TOOLS (JUN 2005)
(IAW DFARS 225.7002-3(c))
252.225-7016 RESTRICTION ON ACQUISITION OF BALL AND ROLLER BEARINGS (MAR 2006)
(IAW DFARS 225.7009-5)
252.225-7019 RESTRICTION ON ACQUISITION OF ANCHOR AND MOORING CHAIN (JUN 2005)
(IAW DFARS 225.7007-3)
252.225-7023 RESTRICTION ON ACQUISITION OF VESSEL PROPELLERS (SEP 2006)
(IAW DFARS 225.7010-4)
252.225-7025 RESTRICTION ON ACQUISITION OF FORGINGS (JUL 2006)
(IAW DFARS 225.7102-4)
252.225-7030 RESTRICTION ON ACQUISITION OF CARBON, ALLOY, AND ARMOR STEEL PLATE
(DEC 2006)
(IAW DFARS 225.7011-3)
252.225-7038 RESTRICTION ON ACQUISITION OF AIR CIRCUIT BREAKERS (JUN 2005)
(IAW DFARS 225.7006-4(b))
252.226-7001 UTILIZATION OF INDIAN ORGANIZATIONS, INDIAN-OWNED ECONOMIC
ENTERPRISES, AND NATIVE HAWAIIAN SMALL BUSINESS CONCERNS
(SEP 2004)
(IAW DFARS 226.104)
52.227-1 AUTHORIZATION AND CONSENT (DEC 2007)
(IAW FAR 27.201-2(a)(1))
52.227-2 NOTICE AND ASSISTANCE REGARDING PATENT AND COPYRIGHT
INFRINGEMENT (DEC 2007)
(IAW FAR 27.201-2(b))
52.229-4 FEDERAL, STATE, AND LOCAL TAXES (STATE AND LOCAL ADJUSTMENTS)
(APR 2003)
(IAW FAR 29.401-3(b))
52.230-6 ADMINISTRATION OF COST ACCOUNTING STANDARDS (APR 2005)
(IAW FAR 30.201-4(d)(1))
252.231-7000 SUPPLEMENTAL COST PRINCIPLES (DEC 1991)
(IAW DFARS 231.100-70)
52.232-1 PAYMENTS (APR 1984)
(IAW FAR 32.111(a)(1))
52.232-8 DISCOUNTS FOR PROMPT PAYMENT (FEB 2002)
(IAW FAR 32.111(b)(1))
52.232-11 EXTRAS (APR 1984)
(IAW FAR 32.111(c)(2))
52.232-17 INTEREST (JUN 1996)
(IAW FAR 32.617(a), FAR 32.617(b))
52.232-23 ASSIGNMENT OF CLAIMS (JAN 1986)
(IAW FAR 32.806(a)(1))
52.232-25 PROMPT PAYMENT (OCT 2003)
(IAW FAR 32.908(c))
(a) Invoice payments—
(5) Computing penalty amount. The Government will compute the interest penalty in accordance with the Office of Management and Budget prompt payment regulations at 5 CFR part 1315.
(i) For the sole purpose of computing an interest penalty that might be due the Contractor, Government acceptance is deemed to occur constructively on the 7th day (unless otherwise specified in this contract) after the Contractor delivers the supplies or performs the services in accordance with the terms and conditions of the contract, unless there is a disagreement over quantity, quality, or Contractor compliance with a contract provision. If actual acceptance occurs within the constructive acceptance period, the Government will base the determination of an interest penalty on the actual date of acceptance. The constructive acceptance requirement does not, however, compel Government officials to accept supplies or services, perform contract administration functions, or make payment prior to fulfilling their responsibilities.
52.232-33 PAYMENT BY ELECTRONIC FUNDS TRANSFER--CENTRAL CONTRACTOR
REGISTRATION (OCT 2003)
(IAW FAR 32.1110(a)(1))
252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS
(MAR 2008)
(IAW DFARS 232.7004)
(a) Definitions. As used in this clause—
(1) “Contract financing payment” and “invoice payment” have the meanings given in section 32.001 of the Federal Acquisition Regulation.
(2) “Electronic form” means any automated system that transmits information electronically from the initiating system to all affected systems. Facsimile, e-mail, and scanned documents are not acceptable electronic forms for submission of payment requests. However, scanned documents are acceptable when they are part of a submission of a payment request made using Wide Area WorkFlow (WAWF) or another electronic form authorized by the Contracting Officer.
(3) “Payment request” means any request for contract financing payment or invoice payment submitted by the Contractor under this contract.
(b) Except as provided in paragraph (c) of this clause, the Contractor shall submit payment requests and receiving reports using WAWF, in one of the following electronic formats that WAWF accepts: Electronic Data Interchange, Secure File Transfer Protocol, or World Wide Web input. Information regarding WAWF is available on the Internet at https://wawf.eb.mil/ .
(c) The Contractor may submit a payment request and receiving report using other than WAWF only when—
(1) The Contracting Officer authorizes use of another electronic form. With such an authorization, the Contractor and the Contracting Officer shall agree to a plan, which shall include a timeline, specifying when the Contractor will transfer to WAWF;
(2) DoD is unable to receive a payment request or provide acceptance in electronic form;
(3) The Contracting Officer administering the contract for payment has determined, in writing, that electronic submission would be unduly burdensome to the Contractor. In such cases, the Contractor shall include a copy of the Contracting Officer’s determination with each request for payment; or
(4) DoD makes a payment for commercial transportation services provided under a Government rate tender or a contract for transportation services using a DoD-approved electronic third party payment system or other exempted vendor payment/invoicing system (e.g., PowerTrack, Transportation Financial Management
System, and Cargo and Billing System).
(d) The Contractor shall submit any non-electronic payment requests using the method or methods specified in Section G of the contract.
(e) In addition to the requirements of this clause, the Contractor shall meet the requirements of the appropriate payment clauses in this contract when submitting payment requests.
252.232-7010 LEVIES ON CONTRACT PAYMENTS (DEC 2006)
(IAW DFARS 232.7102)
52.233-1 DISPUTES (JUL 2002)
(IAW FAR 33.215)
52.233-3 PROTEST AFTER AWARD (AUG 1996)
(IAW FAR 33.106(b))
52.233-4 APPLICABLE LAW FOR BREACH OF CONTRACT CLAIM (OCT 2004)
(IAW FAR 33.215(b))
52.242-13 BANKRUPTCY (JUL 1995)
(IAW FAR 42.903)
252.242-7003 APPLICATION FOR U.S. GOVERNMENT SHIPPING
DOCUMENTATION/INSTRUCTIONS (DEC 1991)
(IAW DFARS 242.1404-2-70)
52.243-1 CHANGES--FIXED-PRICE (AUG 1987)
(IAW FAR 43.205(a)(1))
252.243-7001 PRICING OF CONTRACT MODIFICATIONS (DEC 1991)
(IAW DFARS 243.205-70)
252.243-7002 REQUESTS FOR EQUITABLE ADJUSTMENT (MAR 1998)
(IAW DFARS 243.205-71)
52.244-5 COMPETITION IN SUBCONTRACTING (DEC 1996)
(IAW FAR 44.204(c))
52.244-6 SUBCONTRACTS FOR COMMERCIAL ITEMS (MAR 2007)
(IAW FAR 44.403)
https://wawf.eb.mil/
252.244-7000 SUBCONTRACTS FOR COMMERCIAL ITEMS AND COMMERCIAL COMPONENTS
(DoD CONTRACTS) (JAN 2007)
(IAW DFARS 244.403)
52.246-23 LIMITATION OF LIABILITY (FEB 1997)
(IAW FAR 46.805(a)(1))
52.247-1 COMMERCIAL BILL OF LADING NOTATIONS (FEB 2006)
(IAW FAR 47.104-4(a), FAR 47.104-4(b))
52.247-68 REPORT OF SHIPMENT (REPSHIP) (FEB 2006)
(IAW FAR 47.208-2)
252.247-7023 TRANSPORTATION OF SUPPLIES BY SEA (MAY 2002)
(IAW DFARS 247.574(b)(1))
52.248-1 VALUE ENGINEERING (FEB 2000)
(IAW FAR 48.201(b), FAR 48.201(f))
52.249-2 TERMINATION FOR CONVENIENCE OF THE GOVERNMENT (FIXED-PRICE)
(MAY 2004)
(IAW FAR 49.502(b)(1)(i))
52.249-8 DEFAULT (FIXED-PRICE SUPPLY AND SERVICE) (APR 1984)
(IAW FAR 49.504(a)(1))
52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)
(IAW FAR 52.107(b)) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):
Regulations URLs: (Click on the appropriate regulation.)
http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/far1toc.htm http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/dfars/dfar1toc.htm http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/af_afmc/affars/affar1toc.htm http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/af_afmc/afmc/afmc1toc.htm
NOTE: After selecting the appropriate regulation above, at the "Table of Contents" page, conduct a search for the desired regulation reference using your browser's FIND function. When located, click on the regulation reference
(hyperlink).
52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (APR 1984)
(IAW FAR 52.107(f))
52.253-1 COMPUTER GENERATED FORMS (JAN 1991)
(IAW FAR 53.111)
PART III - LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS
SECTION J
LIST OF ATTACHMENTS
Form Number Description/File Name Date Number of Pages
STATEMENT OF WORK
UNDATED 4
REPSHIP
UNDATED 1
Air Munition Specification
UNDATED 2
Engineering Data List 29AUG2005 3 http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/far1toc.htm http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/dfars/dfar1toc.htm
Source Qualification Statement
UNDATED 3
Contract Data Requirements List
DI-MISC-80043A
25OCT2007 2
Contract Data Requirements List
DI-NDTI-80809B
25OCT2007 1
Contract Data Requirements List
DI-SESS-81315
25OCT2007 1
WAWF
UNDATED 1
PART IV - REPRESENTATIONS AND INSTRUCTIONS
SECTION K
REPRESENTATIONS, CERTIFICATIONS, AND OTHER STATEMENTS
OF OFFERORS OR RESPONDENTS
52.204-3 TAXPAYER IDENTIFICATION (OCT 1998)
(IAW FAR 4.905)
(d) Taxpayer Identification Number (TIN).
[ ]…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .