AFMC_Form_807_Quality_Production.pdf

RECOMMENDED QUALITY ASSURANCE PROVISIONS

AND SPECIAL INSPECTION REQUIREMENTS

1. PR / MIPR NUMBER

2. NATIONAL STOCK NUMBER

1560015827820FJ

3. POINT OF INSPECTION

SOURCE DESTINATION

X

SEE DFARS 246.402

4. POINT OF ACCEPTANCE

SOURCE DESTINATION

X

5. ITEM MANAGER / PHONE

Sarah, Coleman G / 801-586-2883

6. EQUIPMENT SPEC / PHONE

Metcalf, Jason / 801-777-4121

7. CONTRACT QUALITY REQUIREMENTS/SPECIAL INSPECTION REQUIREMENTS

CERTIFICATE OF CONFORMANCE

FAR 52.246-15

CONTRACT RESPONSIBILITY

FOR INSPECTION

FAR 52.246-1

STANDARD INSPECTION

FAR 52.246-2,-3,-4,-5 OR -6

AS APPLICABLE TO CONTRACT

X HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS

AS 9100

COMMERCIAL ITEM INSPECTION

FAR 52.212-4

OTHER (Describe in Block 8)

8. REMARKS

Meredith, Jaime MNAME: 30 NOV 2021DATE:

Component requires inspection and acceptance at source due to the following criteria as defined by AFMCI 23-102:

-Significant Technical Requirements to ensure the configurational baseline -Critical Production Features to ensure Safety of Flight

Defense Contract Management Agency (DCMA) will provide the necessary technical and administrative oversight to ensure the requirements of the Technical Data Package are met. The following criteria shall be considered by in the evaluation by DCMA:

-Material Certifications -Corrosion inhibiting application & Certifications -Dimensional inspection to ensure form/fit/function -Heat Treat Certifications -Non-Destructive Inspection Test Reports -Conductive Coating/Electrical Bonding Testing and Certifications

The TDP provides the specific requirements for 'accept/reject' criteria that support the areas identified above.

8a. OZONE DEPLETING SUBSTANCES (ODS)

X STATEMENT

"I HAVE REVIEWED THE REQUIREMENT, INCLUDING AVAILABLE TECHNICAL DOCUMENTATION, AND BELIEVE THAT IT DOES NOT REQUIRE THE CONTRACTOR USE CLASS I OZONE DEPLETING SUBSTANCES (ODS) IDENTIFIED IN AIR FORCE POLICY, NOR IS IT WRITTEN SO THAT IT CAN

ONLY BE MET BY THE USE OF A CLASS I ODS."

WAIVER (SEE AF FARS 5323)

NOTE: Quality provisions as annotated hereon will not be downgraded without Technical Authority coordination. The Technical Authority must be notified if award selection is made to a new source using Acquisition Method Code (AMC) 3, 4, or 5.

9. QUALITY PRE-AWARD SURVEY

YES NEW SOURCE

PREVIOUS SOURCEX NO

AFMC PARTICIPATION

RECOMMENDED

10. CODES

A. I&A

B. CQR

G

11. SIGNATURE OF TECHNICAL AUTHORITY

Meredith, Jaime M

ORGANIZATION / SYMBOL

416 SCMS / GUEAB

PHONE

801-586-5743 / 586-5743

DATE

30 NOV 2021

Page 1 of 1AFMC FORM 807, 20060111, V1 Version 4Generated by PRPS using Jasper Reports on 18 Jan 2022