AFMC_Form_807_Quality_Requirements.pdf
PDF 85 KB Posted
- Solicitation number
- FA8212-22-R-0013
About this file
This document contains recommended quality assurance provisions and special inspection requirements for a federal contract opportunity. The contract is for structural support parts with national stock number 1560-00-605-4570FJ. Inspection will take place at the source. The Air Force Materiel Command requires inspection and acceptance at the source due to significant technical requirements, critical production features, and safety of flight aspects. The Defense Contract Management Agency will provide oversight to ensure requirements and the technical data package are followed, including material certifications, non-destructive inspections, corrosion protection, and dimensional tolerances. As this is a critical safety item, all critical characteristics defined in associated documents must be evaluated. The solicitation number for this opportunity is FA8212-22-R-0013 and involves quantities between 175 to 375 units for this part. The contract type will be fixed-price single award IDIQ with a five year ordering period through full and open competition for qualified manufacturers, without a small business set-aside. The estimated value is below $5 million.
View the file
Other files
Show all 17
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
RECOMMENDED QUALITY ASSURANCE PROVISIONS
AND SPECIAL INSPECTION REQUIREMENTS
1. PR / MIPR NUMBER
2. NATIONAL STOCK NUMBER
1560006054570FJ
3. POINT OF INSPECTION
SOURCE DESTINATION
X
SEE DFARS 246.402
4. POINT OF ACCEPTANCE
SOURCE DESTINATION
X
5. ITEM MANAGER / PHONE
Salas, Audrey C / 801-775-4292
6. EQUIPMENT SPEC / PHONE
Midkiff, Casey / 801-586-2585
7. CONTRACT QUALITY REQUIREMENTS/SPECIAL INSPECTION REQUIREMENTS
CERTIFICATE OF CONFORMANCE
FAR 52.246-15
CONTRACT RESPONSIBILITY
FOR INSPECTION
FAR 52.246-1
STANDARD INSPECTION
FAR 52.246-2,-3,-4,-5 OR -6
AS APPLICABLE TO CONTRACT
X HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
AS 9100
COMMERCIAL ITEM INSPECTION
FAR 52.212-4
OTHER (Describe in Block 8)
8. REMARKS
Shull, James DNAME: 11 FEB 2022DATE:
This item requires inspection and acceptance at source because the following criteria as required in AFMCI 23-102:
- Significant Technical Requirements to ensure configuration baseline.
- Critical production features to ensure Safety of Flight aspects of this assembly/component.
Defense Contract Management Agency (DCMA) will provide the necessary technical and administrative oversight to ensure the requirements in section 7 and the Technical Data Package (TDP) provided by the contract are complied with. Specific aircraft components perform critical functions and are essential for mission success. Therefore, the following characteristics should be considered in the evaluation by DCMA:
- Material Certifications for Heat Treat
- Non-destructive inspections to support processing in the manufacture of critical aircraft components and assemblies.
- Corrosion inhibiting applications specifications.
- Dimensional requirements to meet requirements of fit-form-function of critical aircraft components and assemblies.
Additionally, note that this NSN is classified as a Critical Safety Item (CSI). Reference Hill Air Force Base Form 462 and associated Part Reports for specific critical characteristics; these characteristics shall be used in the evaluation by DCMA.
The TDP provides the specific requirements for 'accept/reject' criteria that support the areas identified above.
8a. OZONE DEPLETING SUBSTANCES (ODS)
X STATEMENT
"I HAVE REVIEWED THE REQUIREMENT, INCLUDING AVAILABLE TECHNICAL DOCUMENTATION, AND BELIEVE THAT IT DOES NOT REQUIRE THE CONTRACTOR USE CLASS I OZONE DEPLETING SUBSTANCES (ODS) IDENTIFIED IN AIR FORCE POLICY, NOR IS IT WRITTEN SO THAT IT CAN
ONLY BE MET BY THE USE OF A CLASS I ODS."
WAIVER (SEE AF FARS 5323)
NOTE: Quality provisions as annotated hereon will not be downgraded without Technical Authority coordination. The Technical Authority must be notified if award selection is made to a new source using Acquisition Method Code (AMC) 3, 4, or 5.
9. QUALITY PRE-AWARD SURVEY
YES NEW SOURCE
PREVIOUS SOURCEX NO
AFMC PARTICIPATION
RECOMMENDED
10. CODES
A. I&A
B. CQR
G
11. SIGNATURE OF TECHNICAL AUTHORITY
Shull, James D
ORGANIZATION / SYMBOL
416 SCMS / GUEAB
PHONE
801-775-4545 / 775-4545
DATE
11 FEB 2022
Page 1 of 1AFMC FORM 807, 20060111, V1 Version 3Generated by PRPS using Jasper Reports on 11 Feb 2022
File details come from the government source that posted it. Updated .