LandM.docx

SECTION L

INSTRUCTIONS, CONDITIONS, AND NOTICES TO OFFERORS

A. INTRODUCTION:

1. This section provides guidance for preparing proposals and specific instructions on the required format and content. To assure timely and equitable proposal evaluation, offerors shall propose in accordance with this section and all solicitation requirements (i.e. provisions, clauses, appendices, attachments, forms, etc.). Non-conformance with the instructions provided in this section or the requirements and statements of the solicitation may result in an unfavorable evaluation or proposal disqualification (i.e. the offeror was non-responsive to the solicitation requirements).

2. This acquisition is restricted to qualified sources: a qualification package is required for new sources. See FAR Clause 52.209-1 for qualification requirements. PROPOSALS WILL NOT BE CONSIDERED FOR CONTRACT AWARD UNLESS A QUALIFICATION PACKAGE IS SUBMITTED AND ACCEPTED BY THE AIR FORCE ENGINEER PRIOR TO AWARD

3. The government representatives identified below shall be the sole points of contact for this acquisition. All questions, comments, and/or concerns shall be directed to the below points of contact.

Rosita Crawford

CONTRACTING OFFICER

6050 Gum Lane, Bldg. 1215 Hill AFB, UT 84056 Email: rosita.crawford@us.af.mil Tel: 801-586-1236

4. If an offeror believes that the solicitation contains errors, omissions, or is otherwise unsound (i.e. the offeror is unable to agree to the proposed delivery schedule), the offeror shall immediately notify the aforementioned government representative in writing with supporting rationale. Upon consideration the government may continue, amend, or cancel the solicitation.

5. The government reserves the right to award this effort based on initial proposals, as received, without discussions IAW FAR 52.215-1. However, if the Contracting Officer (CO) determines that entering into discussions is in the best interest of the Government, the CO may do so.

6. The government intends to award the requirement(s) represented in this solicitation to one awardee. However, the Government reserves the right to award no contract at all.

B. PROPOSAL FORMAT:

1. A digital proposal is required; however, offerors may submit a hardcopy proposal in addition to the digital proposal.

a. Email to the aforementioned government representative(s) is the preferred method for delivering digital proposals.

b. Hardcopy proposals shall be submitted via courier to the aforementioned government representative(s).

2. Offerors shall fill in their proposed prices and delivery dates in Part I Section B of the Solicitation.

3. Offerors shall fill in the Inspection and Acceptance clause, as well as the F.O.B Origin clause in Part I Section E of the solicitation.

4. Offerors shall fill in their representations, certifications, and other statements as in Part IV Section K of the solicitation.

C. EVALUATION CRITERIA:

1. The only evaluated factor for this award will be price, therefore, source selection procedures for Best Value Continuum (FAR 15.101) will not be utilized. Award will be made to the approved source that proposes the lowest Total Evaluated Price.

2. Price Proposal: Completion of the RFP, Section B Schedule will represent the price proposal.

***IMPORTANT NOTE

The government authorizes Alternate/Conditional proposals for this acquisition.

The government has two other Solicitations posted in FBO for similar wing/requirement for the A-10 weapon system. Solicitations:

a) FA8212-18-Q-0039-0003 Left Panel Trailing Edge

b) FA8212-18-R-0033-0002 Right Panel Trailing Edge

If desired, Contractor may send two Proposals as follows: Proposal 1 & an Alternate proposal.

PROPOSAL 1: Pricing based on a Stand-alone proposal for this Requirement only (Center Panel Trailing Edge).

ALTERNATE PROPOSAL: Pricing based on the conditional chance of being awarded Solicitation FA8212-18-Q-0039-0003 Left Panel Trailing Edge & FA8212-18-R-0033-0002 Right Panel Trailing Edge. Please note this is for cost saving purposes since these three requirements are for similar wing/weapon systems and may allow for the great overall production quantities to realize economies of scale.

D. CONTRACT DOCUMENTATION:

1. Solicitation/Representation and Certifications:

The purpose of this section is to provide information to the Government for preparing the contract document and supporting file. The offeror’s proposal shall include a signed copy of the solicitation, and Sections A through K. This includes:

Section A – Solicitation/Contract Form: Completion of block 13 and signature and date for block 27 of the SF1449. Signature by the offeror on the SF 1449 constitutes an offer, which the Government may accept.

Section B – Supplies or Services and Costs/Prices: All pricing information shall be addressed in Section B – The Schedule of the RFP. Information shall be limited to Contract Line Item Number (CLIN), Sub-CLIN, including unit and extended pricing as specified in Section B.

Section F – Deliveries or Performance: Completion of Section B delivery requirements by providing an accurate, realistic delivery date for each CLIN/Sub-CLIN as required by Clause 52.211-8.

Section I – Contract Clauses: Complete all clauses requiring contractor fill-in.

SECTION M

EVALUATION FACTORS FOR AWARD

E. INTRODUCTION:

1. This acquisition will utilize Lowest Priced procedures restricted to technically qualified “Approved Source” offeror(s) This acquisition shall use price as the only evaluated factor

2. The government intends to award the requirement(s) represented in this solicitation to one awardee. However, the Government reserves the right to award no contract at all.

F. EVALUATION FACTORS AND PROCEDURES:

1. The government shall evaluate proposals based on the evaluation factor below:

Factor 1- Price

The Offeror’s price will be evaluated based upon the Total Evaluated Price (TEP). The Offeror’s Price Proposal will be evaluated for the criteria of Price Reasonableness and Balance.

Price Reasonableness: The proposed prices will be evaluated for Price Reasonableness. For a price to be reasonable, it will represent a price to the Government that a prudent person would pay when consideration is given to prices in the market. Normally, price reasonableness is established through adequate price competition, but may also be determined through cost and price analysis techniques as described in FAR 15.404. For additional information see FAR 31.201-3.

Balance: The Government may also determine a proposal unacceptable should the proposed prices be unbalanced. Unbalanced pricing exists when, despite an acceptable total evaluated price, the price of one or more items/Contract Line Item Numbers (CLINs) is significantly overstated or understated as indicated by the application of price analysis techniques as those defined by FAR 15.404-1.

Total Evaluated Price (TEP): A TEP will be calculated to be used for evaluation of offers to determine the lowest priced proposal. The TEP calculation will be a summation of all Contract Line Item Pricing.

2. Solicitation Requirements, Terms and Conditions: Offerors are required to meet all solicitation requirements, such as terms and conditions, representations and certifications, and required delivery schedules.

A qualification requirements package is attached to this solicitation for those contractors who are not an “Approved Source” on the Qualified Bidders List. Per FAR 9.202(e), the government reserves the right not to delay contract award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification.

3. The process for the evaluation of proposals is as follows:

a. This award will be made to the offeror that submitted the proposal with the lowest Total Evaluated Price and is a qualified source.

b. Performance record and history will be assessed as one of the multiple standards required for a successful offeror to be determined responsible as described in FAR 9.104. Contractors shall meet the required delivery dates, as well as the terms and conditions in this solicitation, to be determined responsible.