QA.pdf
PDF 87 KB Posted
- Attached to
- Power Supply Assembly
- Solicitation number
- FA820627QB002
About this file
This document is an AFMC Form 807, Recommended Quality Assurance Provisions and Special Inspection Requirements, dated August 20, 2026, prepared by the Air Force 414 SCMS/GUEA organization.
The form specifies quality assurance and inspection requirements for a Power Supply Assembly (Radar Range Simulator), part number 47C530433G1, with CAGE code 98747 and National Stock Number 1190012440693NP. The item is approximately 4.9 x 5.6 x 4.0 inches and is not ESD sensitive. Inspection will occur at source with acceptance also at source. Standard inspection per FAR 52.246-2, -3, -4, -5, or -6 applies to the contract. The government agency will review Acceptance Test Procedures (ATPs) used in production testing at its discretion. Configuration requirements include overall conformance to drawings with no damage, clean finishes, properly threaded holes, and no seal material chips around sockets or pins. Deliverables must include a complete certificates package covering materials, components, vendor inspection, and test results. Marking must be correct and readable, and packaging must include protective caps, individual packaging with sufficient padding, correct inner/outer package markings, and proper addressing. A pre-award quality survey is not required as this is a previous source. The Technical Authority, Ray D. Murrison (414 SCMS/GUEA, 801-775-2147), signed the form on August 31, 2026, noting that quality provisions will not be downgraded without his coordination and that he must be notified if award is made to a new source.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| CDRL.pdf | ||
| Solicitation - FA820627QB002.pdf | ||
| Packaging.pdf | ||
| FA requirements.pdf | ||
| Transportation.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
RECOMMENDED QUALITY ASSURANCE PROVISIONS
AND SPECIAL INSPECTION REQUIREMENTS
1. PR / MIPR NUMBER
2. NATIONAL STOCK NUMBER
1190012440693NP
3. POINT OF INSPECTION
SOURCE DESTINATION
X
SEE DFARS 246.402
4. POINT OF ACCEPTANCE
SOURCE DESTINATION
X
5. ITEM MANAGER / PHONE
Bodily, Brandon K / 801-777-1743
6. EQUIPMENT SPEC / PHONE
Martin, Daryl S / 801-777-3299
7. CONTRACT QUALITY REQUIREMENTS/SPECIAL INSPECTION REQUIREMENTS
CERTIFICATE OF CONFORMANCE
FAR 52.246-15
CONTRACT RESPONSIBILITY FOR INSPECTION
FAR 52.246-15
X STANDARD INSPECTION
FAR 52.246-2,-3,-4,-5 OR -6 AS APPLICABLE TO CONTRACT
HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS FAR 52.246-11
COMMERCIAL ITEM INSPECTION
FAR 52.212-4
OTHER (Describe in Block 8)
8. REMARKS
Murrison, Ray DNAME: 20 AUG 2026DATE:
Office: GUEA
- At their discretion, gov't agency will review ATPs used in production testing.
- Configuration: Overall to Dwg, No Damage, Clean Finishes and Threaded holes, No Seal material chips, around sockets or pins.
- Complete Certs Package; Materials, Components, Vendor Inspection, Tests Results.
- Marking; Correct, Readable
- Packaging; Protective Caps, Individually Packaged, Sufficient Padding, Inner/Outer Package Markings Correct, Sufficient Outer Package Protecting Cables, Addressed Correctly
- Any FA or Production discrepancies Noted and Corrected
INFO:
PN: 47C530433G1
Noun: Power Supply Assy - Radar Range Simulator Function: Power Supply within the RRS Chassis Assembly.
CAGE: 98747
NHA: 47E527343G2
Approximate Size: 4.9 x 5.6 x 4.0 inches ESD Sensitive: No T.O. Numbers: 11N-TRV5392-2 ES Code: 47
8a. OZONE DEPLETING SUBSTANCES (ODS)
X STATEMENT
"I HAVE REVIEWED THE REQUIREMENT, INCLUDING AVAILABLE TECHNICAL DOCUMENTATION, AND BELIEVE THAT IT DOES NOT REQUIRE THE CONTRACTOR USE CLASS I OZONE DEPLETING SUBSTANCES (ODS) IDENTIFIED IN AIR FORCE POLICY, NOR IS IT WRITTEN SO THAT IT CAN
ONLY BE MET BY THE USE OF A CLASS I ODS."
WAIVER (SEE DAFFARS 5323.8)
NOTE: Quality provisions as annotated hereon will not be downgraded without Technical Authority coordination. The Technical Authority must be notified if award selection is made to a new source using Acquisition Method Code (AMC) 3, 4, or 5.
9. QUALITY PRE-AWARD SURVEY
YES NEW SOURCE
PREVIOUS SOURCEX NO
AFMC PARTICIPATION
RECOMMENDED
10. CODES
A. I&A
B. CQR
C
11. SIGNATURE OF TECHNICAL AUTHORITY
Murrison, Ray D
ORGANIZATION / SYMBOL
414 SCMS / GUEA
PHONE
801-775-2147 / 775-2147
DATE
31 AUG 2026
Page 1 of 1Prescribed by: AFMCI20-102 Version 1Generated by PRPS using Jasper Reports on 02 Nov 2026
AFMC FORM 807, 20230130 PREVIOUS EDITION IS OBSOLETE
File details come from the government source that posted it. Updated .