Packaging.pdf
PDF 71 KB Posted
- Attached to
- Seal & O-Ring
- Solicitation number
- FA820626Q0989
About this file
This document is an AFMC Form 158 Packaging Requirements specification for Purchase Instrument Number FD20202600989-00, Version 1. The document establishes packaging and marking standards for two line items under military contract requirements.
The document mandates compliance with MIL-STD-129 Revision R and MIL-STD-2073-1 Revision E for all packaging and military marking standards. It includes explicit requirements for wood packaging material (WPM) compliance with United Nations restrictions on invasive species, specifically the pinewood nematode. All wooden lumber, pallets, and containers must be constructed from debarked wood and heat-treated to 56 degrees Celsius (133 degrees Fahrenheit) for 30 minutes minimum, with certification from an accredited agency recognized by the American Lumber Standards Committee (ALSC) and reference to International Standards for Phytosanitary Measures (ISPM No. 15). For item 5330DTG2605AANB, no packaging data is required (PACRN AAA). For item 5330010818892NB, MIL Long Line Packaging Level B applies (PACRN AAB), with unit pack specifications of 5.00 pounds weight, 18.5 inches length, 12.5 inches width, 3.0 inches depth, and 0.401 cubic feet. Shipping containers must meet MIL-STD-129 marking criteria and may require additional marking such as unit serial numbers, original equipment manufacturer (OEM) names, or OEM model numbers as specified. The document was prepared by Packaging Specialist Shawn R. Peeler from the 406 SCMS/GULAA organization on 10 September 2026.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Transportation.pdf | ||
| FA820626Q0989- Solicitation.pdf | ||
| CDRL.pdf | ||
| SOW.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PACKAGING REQUIREMENTS
PURCHASE INSTRUMENT NUMBER: FD20202600989-00 VERSION: 1
MIL-STD 129 REVISION: R MIL-STD 2073-1 REVISION: E
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES). WOODEN LUMBER, WOODEN
PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLET'S, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES" (ISPM)NO.15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
PACRN: PACKAGING REQUIREMENT: PRESERVATION LEVEL: PACKAGING LEVEL: SPI: SPI REV: SPI DATE:
AAA No Packaging Data Required
ITEM(S):
5330DTG2605AANB
CODED DATA:
QUP ICQ
PRES
METH CD
PRES
MTL
WRAP
MTL
CUSH
DUNN CT
UNIT
CONT
INT
CONT UCL
SPEC
MKG
UNIT PACK
WEIGHT
UNIT PACK
LENGTH
UNIT PACK
WIDTH
UNIT PACK
DEPTH
UNIT PACK
CUBE OPI
ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS:
SUPPLEMENTAL PACKAGING INSTRUCTION TEXT:
VENDOR PACKAGING INSTRUCTIONS:
PACRN: PACKAGING REQUIREMENT: PRESERVATION LEVEL: PACKAGING LEVEL: SPI: SPI REV: SPI DATE:
AAB MIL Long Line Packaging MIL B
ITEM(S):
5330010818892NB
CODED DATA:
QUP ICQ
PRES
METH CD
PRES
MTL
WRAP
MTL
CUSH
DUNN CT
UNIT
CONT
INT
CONT UCL
SPEC
MKG
UNIT PACK
WEIGHT
UNIT PACK
LENGTH
UNIT PACK
WIDTH
UNIT PACK
DEPTH
UNIT PACK
CUBE OPI
1 000 41 1 00 EA NA A NS 00 B 17 5.00 18.5 12.5 3.0 0.401 M
ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS:
SUPPLEMENTAL PACKAGING INSTRUCTION TEXT:
<31>F000003XC7
VENDOR PACKAGING INSTRUCTIONS:
Military Packaging and Marking Items shall be packaged in accordance with MIL-STD-2073-1, Standard Practice for Military Packaging. Shipping and storage markings shall be in accordance with MIL-STD-129, Standard Practice for Military Marking.
Page 1 of 2AFMC 158 Version 1Generated by PRPS using Jasper Reports on 14 Sep 2026
PACKAGING REQUIREMENTS
Shipping Container Marking Shipping containers shall be marked meeting the following criteria: (a) MIL-STD-129, Standard Practice for Military Marking. (b) Additional marking and/or bar coding requirements exceeding those of MIL-STD-129 (e.g., unit serial numbers, original equipment manufacturers (OEM) name, or OEM model number, as specified on the AFMC Form 158.
ORGANIZATION / OFFICE SYMBOL:
406 SCMS / GULAA
PACKAGING SPECIALIST:
Peeler, Shawn R
PHONE NUMBER:
801-777-6411 / 777-6411
SIGNATURE:
//SIGNED//Peeler, Shawn R
DATE:
26253 - 10 SEP 2026
Page 2 of 2AFMC 158 Version 1Generated by PRPS using Jasper Reports on 14 Sep 2026
File details come from the government source that posted it. Updated .