AFMC_807_QA.pdf
PDF 84 KB Posted
- Attached to
- T-38 Gearbox Remanufacture Federal contract opportunity
- Solicitation number
- FA820624R0782
About this file
This document is a Recommended Quality Assurance Provisions and Special Inspection Requirements for a federal contract opportunity. The key details are:
The requirement is for the remanufacture of the T-38 gearbox. The government may award to more than one contractor, but the award is dependent on the offeror being an approved small business qualified source. Funds are not currently available, so no award will be made until funds are available. The government reserves the right to cancel the solicitation. The government technical authority requires the contractor to perform quality assurance and inspection in accordance with ANSI/ASQZ1.4, using General Inspection Level II and Acceptance Quality Limit of 1.0. The contractor must ensure the gearbox is fully functioning and passes all test requirements outlined in the relevant technical order. A test report must be provided to the local DCMA representative or 419 SCMS/GUEA.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Repair Qualification Requirements (RQR)_T-38_F-5 Gearbox signed Section C (1).pdf | ||
| TRNSPDATA_AFMC1653.pdf | ||
| PKGRQMT_AFMC_158.pdf | ||
| Packaging_SOW.pdf | ||
| Statement_of_Work.pdf | ||
| CDRL_1423-1.pdf | ||
| GFP.pdf | ||
| QALI.pdf | ||
| RDL_REPORT.pdf | ||
| FA8206-24-R-0782 Solicitation Final.pdf | ||
| IUID.pdf | ||
| Green_Statement.pdf | ||
| Item_Description.pdf | ||
| SPIRES.pdf | ||
| CAV_AF_Reporting.pdf |
Show all 15
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
RECOMMENDED QUALITY ASSURANCE PROVISIONS
AND SPECIAL INSPECTION REQUIREMENTS
1. PR / MIPR NUMBER
2. NATIONAL STOCK NUMBER
1680014405106RP
3. POINT OF INSPECTION
SOURCE DESTINATION
X
SEE DFARS 246.402
4. POINT OF ACCEPTANCE
SOURCE DESTINATION
X
5. ITEM MANAGER / PHONE
Hull, Carter A / 801-814-5966
6. EQUIPMENT SPEC / PHONE
Langdon, Dillon / 801-775-4334
7. CONTRACT QUALITY REQUIREMENTS/SPECIAL INSPECTION REQUIREMENTS
CERTIFICATE OF CONFORMANCE
FAR 52.246-15
CONTRACT RESPONSIBILITY
FOR INSPECTION
FAR 52.246-1
STANDARD INSPECTION
FAR 52.246-2,-3,-4,-5 OR -6
AS APPLICABLE TO CONTRACT
X HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
ISO 9001:2000
COMMERCIAL ITEM INSPECTION
FAR 52.212-4
OTHER (Describe in Block 8)
8. REMARKS
Collins, Eric SNAME: 10 MAR 2022DATE:
Perform quality assurance and inspection in accordance with ANSI/ASQZ1.4, using General Inspection Level II and Acceptance Quality Limit of 1.0. Ensure gearbox is fully functioning, passing all test requirements as outlined in TO 16G1-102-3, Chapter 7. Test Report Required may be satisfied by sending results to local DCMA representative. If a local DCMA representative is not available, send results to 419 SCMS/GUEA.
8a. OZONE DEPLETING SUBSTANCES (ODS)
X STATEMENT
"I HAVE REVIEWED THE REQUIREMENT, INCLUDING AVAILABLE TECHNICAL DOCUMENTATION, AND BELIEVE THAT IT DOES NOT REQUIRE THE CONTRACTOR USE CLASS I OZONE DEPLETING SUBSTANCES (ODS) IDENTIFIED IN AIR FORCE POLICY, NOR IS IT WRITTEN SO THAT IT CAN
ONLY BE MET BY THE USE OF A CLASS I ODS."
WAIVER (SEE AF FARS 5323)
NOTE: Quality provisions as annotated hereon will not be downgraded without Technical Authority coordination. The Technical Authority must be notified if award selection is made to a new source using Acquisition Method Code (AMC) 3, 4, or 5.
9. QUALITY PRE-AWARD SURVEY
X YES X NEW SOURCE
PREVIOUS SOURCENO
X AFMC PARTICIPATION
RECOMMENDED
10. CODES
A. I&A
B. CQR
G
11. SIGNATURE OF TECHNICAL AUTHORITY
Collins, Eric S
ORGANIZATION / SYMBOL
419 SCMS / GUEA
PHONE
801-775-5543 / 775-5543
DATE
10 MAR 2022
Page 1 of 1AFMC FORM 807, 20060111, V1 Version 1Generated by PRPS using Jasper Reports on 24 Jul 2024
File details come from the government source that posted it. Updated .