CSS - F108 Engine Digital Turning Tool Kits - Amendment 01.docx

SOLICITATION # FA813224Q0045

F108 ENGINE DIGITAL TURNING TOOL KITS

Tinker AFB, OK

The Air Force Sustainment Center’s Maintenance Contracting Branch (AFSC/PZIMC, 3001 Staff Dr Ste 2S76, Tinker AFB, OK 73145-3303) at Tinker Air Force Base, Oklahoma, intends to award a Firm Fixed Price (FFP) contract for Three (3) F108 ENGINE DIGITAL TURNING TOOL KITS. See Section 2 – entitled Supplies and Price – of the Quote Sheet for complete details.

This is a combined synopsis/solicitation for commercial items prepared IAW the format in Federal Acquisition Regulation (FAR) Subpart 12.603, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued aside from the one posted here.

This solicitation is being issued as a request for quotation (RFQ) IAW FAR Part 13, the Defense FAR Supplement (DFARS) Part 213, and the Department of the Air Force FAR Supplement (AFFARS) Par 5313. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC # 2024-05, DFARS Change 05/30/2024, and DAFFARS Change DAFAC 2024-0612

This acquisition is a Full and Open competitive effort

NAICS Code: 332510 The Non-Manufacturing Rule does not apply to this acquisition

TERMS, CONDITIONS, PROVISIONS, & CLAUSES

EVALUATION CRITERIA

Issuance of award will be based on one evaluation factor: The lowest price technically acceptable

All quotations must conform to the solicitation requirements, to include all stated terms, conditions, representations, and certifications. All items will be evaluated to ensure they conform to the requirements set forth in this solicitation.

QUOTE SUBMISSION INFORMATION

Quotes are due to the point of contact (POC) below by 23 August 2024, 12:00 PM (Noon) Central Daylight Time

All quotes must be good for no less than 90 days after the quote submission date above.

All Offerors must be registered in the System for Award Management (SAM; https://sam.gov/) prior to quoting. Failure to have an active registration status in SAM by the time of award will make that Offeror ineligible to receive the award with no exceptions.

SHIPPING INFORMATION

Shipping for each item will be FOB Destination only (Tinker AFB, OK 73145). Separate charges for shipping/freight will not be allowed. Please work this into your quoted price.

PAYMENT TERMS

Payment terms will, by default, be Net 30, which means the Government has 30 days to pay you after you submit your invoice. You may offer payment discounts for early payment, but this will not be considered in quote evaluation.

Invoices must be submitted in Wide Area Workflow (WAWF) application, which can be found in the Government's Procurement Integrated Enterprise Environment (PIEE; https://piee.eb.mil/). Payment will be made after the invoice is signed in WAWF and after the item is received and accepted by the Government; do not submit invoices until the item has been delivered/performed.

PROVISIONS AND CLAUSES

All clauses and provisions can be found on the following websites:

· Federal Acquisition Regulation (FAR) – https://www.acquisition.gov/browse/index/far

· Defense Federal Acquisition Regulation Supplement (DFARS) – https://www.acquisition.gov/dfars

· Department of the Air Force Federal Acquisition Regulation Supplement (DAFFARS) – https://www.acquisition.gov/daffars

52.212‐1 ‐‐ Instructions to Offerors – Commercial Items

ADDENDUM as prescribed in FAR 12.301(b)(1) –

As prescribed in FAR 12.301(b)(1), the following addendum is provided for this solicitation and hereby amends all language therein:

1. Quotes in response to this solicitation must be submitted no later than 23 August 2024/12:00 PM CST. Quotes must be submitted via email to Margaret King (Jennifer Azbill). The Government reserves the right to consider late quotes.

NOTICE TO OFFERORS – SOLICIATION REQUIREMENTS

If you disagree with any of the solicitation requirements (which includes all stated terms, conditions, representations, and certifications), you must inform the Government of your issue with the aforementioned requirements and provide your rationale for disagreement. The Government reserves the right to reject any/all quotes which do not conform to the solicitation requirements

2. All price quotations must be submitted on the Quote Sheet (see last pages of this document), which must be filled out completely.

3. Shipping will be FOB Destination (Tinker AFB, OK 73145) only. Separate charges for shipping/freight will not be allowed. Please work this charge into your quote’s total price.

4. Please provide item specifications/technical information to us. This information must be sufficient for us to determine that each item either fits/does not fit the description of what we’re asking for.

5. We intend to issue the award without interchanges; however, the Government reserves the right to conduct interchanges with one, some, or all Offerors if later determined by the Contracting Officer to be necessary. The Government may waive informalities and minor irregularities in quotations received; therefore, the Offeror’s initial quotation should be complete and contain the Offeror’s best terms from a price and technical standpoint.

Failure to follow all of these instructions may render you ineligible for award.

[End of Provision Addendum]

52.212‐2 ‐‐ Evaluation – Commercial Items ADDENDUM as prescribed in FAR 12.301(c) –

As prescribed in FAR 12.301(c), the following addendum is provided for this solicitation and hereby amends all language therein:

1. The Government intends to award this requirement resulting from this solicitation to the responsible Offeror who provides us with the lowest‐priced quote for the items which meet all the terms and conditions in this solicitation (which includes the item description).

2. After closing of this solicitation, the lowest three quotes will be evaluated by Contracting and by the Government’s subject matter experts (SME). The following evaluation factor will be used:

a. Lowest Total Price – as found on the Quote Sheet

The Government will also review Terms & Conditions-related items such as (but not limited to) shipping info, payment info, inclusion of product documentation, the offered product’s technical merit, completed Quote Sheet, Contractor responsibility (IAW FAR 9.104-6(a)), and any other non-price items related to this requirement. The Government may look at any Federal performance database to ensure the potential Offerors have a record of responsibility and fulfilling requirements without issues.

The Government reserves the right to request more information from any Offeror about their quote or to conduct interchanges at any time during the evaluation process.

The Government reserves the right to withhold award for this requirement if it determines it to be in their best interest.

3. Award Notification

i. Offeror/Business Name

ii. City and State

iii. Contract #

iv. Award amount No other details or debrief will be provided.

[End of Provision Addendum]

52.212‐3 ‐‐ Offeror Representations and Certifications ‐‐ Commercial Items.

The Offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site located at http://www.sam.gov/portal (Only complete and return if there are changes to current SAM Registration. If 52.212-3 is not returned the Offeror is affirming that the current SAM registration is current, accurate, and complete). If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (u) of this provision.

52.212-4 -- Contract Terms and Conditions -- Commercial Items

52.212‐5 ‐‐ Contract Terms and Conditions Required to Implement Statues or Executive Orders—Commercial Items

Clauses/Provisions IAW FAR 12.301:

52.204-7, System for Award Management 52.204-13, System for Award Management Maintenance 52.204-16, Commercial and Government Entity Code Reporting 52.204-18, Commercial and Government Entity Code Maintenance 52.204-24, Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment

The following clauses within 52.212-5 are included but not limited to:

52.204-10, Reporting Executive Compensation and First-Tier Subcontract 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment 52.204-27 Prohibition on a ByteDance Covered Application.

52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment 52.219-28, Post Award Small Business Program Representation 52.222-3, Convict Labor 52.222-19, Child Labor—Cooperation with Authorities and 52.222-21, Prohibition of Segregated Facilities 52.222-26, Equal Opportunity 52.222-36, Equal Opportunity for Workers with Disabilities 52.222-50, Combating Trafficking in Persons 52.232-33, Payment by Electronic Funds Transfer-System for Award Management 52.232-40, Providing Accelerated Payments to Small Business subcontractors

The following DFARS clauses are included but not limited to:

252.203-7000, Requirements Relating to Compensation of Former DoD Officials 252.203-7002, Requirement to Inform Employees of Whistleblowers Rights 252.203-7005, Representation Relating to Compensation of Former DoD Officials 252.204-7015, Notice of Authorized Disclosure of Information for Litigation Support 252.204-7017, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation 252.204-7018, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services 252.204-7024, Notice on the Use of the Supplier Performance Risk System.

252.223-7008, Prohibition of Hexavalent Chromium 252.225-7000, Buy American—Balance of Payments Program Certificate 252.225-7001, Buy American and Balance of Payments Program 252.225-7002, Qualifying Country Sources as Subcontractors 252.225-7055, Supply Representation Regarding Business Operations with the Maduro Regime 252.225-7059, Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region–Representation 252.225-7060, Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports 252.232-7006, Wide Area WorkFlow Payment Instructions 252.232-7010, Levies on Contract Payments 252.244-7000, Subcontracts for Commercial Items 252.247-7022, Representation of Extent of Transportation by Sea 252.247-7023, Transportation of Supplies by Sea

5352.223-9000, Elimination of Use of Class I Ozone Depleting Substances (ODSs)

5352.201-9101, AFSC-TINKER DAFFARS 2023-7

LIST OF ATTACHMENTS

QUOTE SHEET

Solicitation # FA813224Q0045 – F108 Engine Turning Tool Kits Tinker AFB, OK

Offerors are REQUIRED to return the portion of this CSS below with the completed information and authorized signature. Offerors may also provide their company’s quotation sheet in addition to this response page.

SECTION 1 – OFFEROR INFORMATION

Company Name

Address

CAGE Code and SAM UEI

The Government cannot enter into contracts or agreements with Offerors not registered in SAM. For registration information, visit the SAM website (https://www.sam.gov/) and follow the instructions in the Quick Start Guide For SAM Registration, which can be found under the Help Tab and User Guides submenu.

Business Size

Web Page URL

Point of Contact

POC Phone # and email address

SECTION 2 – SUPPLIES AND PRICE

CLIN

Description/Product

Qty

Unit

Unit Price

Total Price

Digital Turning Tool Kit must have a borescope and include the following:

- The Controller

- The Power Unit

- The Drive Unit

- Adapter Shaft for CFM56-2(M)/F108 Engine

- Screen to Display Images and Videos

*** Please provide us with warranty information for any and all items in this RFQ ***

Payment Terms / Discount Terms

NET 30 / _______% In _______ Days After Invoice Submission in WAWF

An example of a payment discount would be 2.5% in 7 days, which means that although we have 30 days to pay you after submission of invoices, we would receive a 2.5% discount if we paid you within 7 days.

Delivery Time

___________ Days after Receipt of Order

SECTION 3 – CERTIFICATION OF RESPONSE

The Offeror is required to sign this document and return a copy to issuing office. By signing and returning this, the Offeror agrees to furnish and deliver all items set forth or otherwise identified above and on any additional sheets subject to the terms, conditions, provisions, clauses, and specifications of the solicitation and award (if received). The Offeror may be required to provide commercial product literature for any or all items quoted above as required/requested by the Contracting Officer.

NAME OF OFFEROR’S REPRESENTATIVE TITLE

SIGNATURE DATE