Item Description.pdf

PDF 1009 KB Posted

Attached to
Electrostatic Paint Guns and Carts IDIQ
Solicitation number
FA8125-27-Q-0001
Issued by

About this file

MEMORANDUM FOR RECORD – PURCHASE DESCRIPTION

This is a Memorandum for Record from the Department of the Air Force documenting procurement specifications for portable electrostatic paint cart systems and spray guns. The Air Force Sustainment Center (AFMC) at Tinker Air Force Base, Oklahoma issued this memorandum on 1 September 2026 for the AMXG group's purchase of Graco brand equipment under a 5-year Indefinite Delivery Indefinite Quantity (IDIQ) contract. The procurement specifies two distinct contract line items (CLINs): CLIN 0001 for Fully Integrated Mobile Cart Assemblies and CLIN 0002 for Standalone Electrostatic Spray Guns. The brand is restricted to genuine Graco components only. The maximum annual ceiling is 24 complete carts and 24 standalone spray guns per ordering period, with a minimum order size of twelve (12) CLIN 0001 units.

CLIN 0001 fully integrated mobile paint cart assemblies must include a manual air-assisted airless electrostatic paint gun rated for 85kV (specifically Graco H85T10/Pro Xp85) with an internal 85kV power supply and autonomous operation capabilities. The gun features 1/4-inch NPSM connections, withstands 3,000 psi fluid pressure and 100 psi air pressure, and includes a 613 spray tip with manual on/off electrostatic switch and visual indicator. The cart assembly includes a minimum 9.9-gallon steel paint pot compatible with 10-gallon disposable liners, a genuine Graco President 30:1 fluid pump rated for 3,000 psi, 100-mesh filter, and pneumatic systems with one central 1/2-inch quick coupler supplying 100 psi to the agitator, gun, and pump via individual regulators. The system incorporates minimum 99-foot grounded electrostatic air hose and high-pressure nylon-lined fluid hose with 1/4-inch ID swivel connections, plus a 3-6 foot whip to the paint gun. The painted mobile cart shall not exceed 34 inches wide by 44 inches long by 54 inches tall, feature four no-flat tires (non-swivel rear tires at least 15 inches diameter; swivel front tires with locking brakes at least 6 inches diameter), include a push handle, integrated hose hooks, and a 100-foot grounding wire with clamp. The complete system must be FM-rated for Class I, Division I Hazardous locations using Group D materials or independently certified as intrinsically safe, with all wetted parts constructed from compatible materials (carbon steel, stainless steel, chrome, tungsten carbide, or PTFE) and rated for continuous operation from 40°F to 120°F. All components must be compatible with MIL-PRF-23377 epoxy primers and MIL-PRF-85285 polyurethane topcoats.

CLIN 0002 standalone electrostatic spray guns must meet identical specifications to those integrated in CLIN 0001 carts, including the Graco H85T10/Pro Xp85 85kV gun with internal power supply, autonomous operation, 1/4-inch NPSM connections, 3,000 psi fluid and 100 psi air pressure ratings, 613 spray tip, manual electrostatic on/off switch with visual indicator, and functional fan and atomizing air adjustment valves. The standalone gun must also be FM-rated for Class I, Division I Hazardous locations or independently intrinsically safe certified, with wetted parts of compatible construction, rated for appropriate operating pressures, compatible with the specified military primers and topcoats, and rated for continuous operation from 40°F to 120°F. For all CLINs, the government requires complete commercial technical manuals, operating instructions, and illustrated parts breakdowns; minimum 1-year standard commercial warranty; FOB destination to Tinker AFB, Oklahoma; and 60-to-90-day delivery after receipt of order during any active ordering period.

View the file

Other files

File Type Posted
FA8125-27-Q-0001.pdf PDF
BNJ For Electrostatic Paint Guns and Carts.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

DEPARTMENT OF THE AIR FORCE

HEADQUARTERS AIR FORCE SUSTAINMENT CENTER (AFMC)

TINKER AIR FORCE BASE OKLAHOMA

1 September 2026

MEMORANDUM FOR RECORD

SUBJECT: Item Description, A26-138 Portable Electrostatic paint cart systems & Spray Guns.

1. The AMXG group is requesting utilization of funds for the purchase of Portable Electrostatic paint cart systems & Spray Guns.

2. The requested equipment item descriptions/specifications are outlined below.

PURCHASE DESCRIPTION FOR PORTABLE ELECTROSTATIC PAINT CART SYSTEMS &

STANDALONE SPRAY GUNS.

1. SCOPE & IDIQ ORDERING LIMITATIONS

• The Government requires the procurement of two distinct items:

o CLIN 0001 -Fully Integrated Mobile Cart Assemblies o CLIN 0002 -Standalone Electrostatic Spray Guns

• Brand Restriction: Graco Brand Name ONLY (Genuine Graco components/integrated assemblies).

• Contract Type: 5-Year IDIQ

• Maximum Annual Ceiling: 24 Complete Carts AND 24 Standalone Spray Guns per

Ordering Period.

• Minimum Order Size: Twelve (12) of CLIN 0001

2. CLIN 0001: FULLY INTEGRATED MOBILE PAINT CART ASSEMBLY

2.1 Electrostatic Paint Gun Requirements (as part of the integrated cart):

• The paint gun shall be a manual air-assisted airless electrostatic paint gun rated for 85kV (specifically genuine Graco H85T10 / Pro Xp85).

• The paint gun shall incorporate an internal power supply rated for 85 kV and feature a standard visual display.

• The paint gun shall operate autonomously without external electrical cords or a separate electrostatic control module.

• The paint gun shall feature a 1/4-inch left-handed male NPSM air inlet and a 1/4-inch male NPSM fluid inlet.

• The paint gun shall be rated to withstand a maximum fluid pressure of 3,000 psi and a maximum fluid temperature of 120°F.

• The paint gun shall be rated to withstand a maximum air pressure of 100 psi.

• The paint gun shall be delivered equipped with a 613 spray tip.

• The paint gun shall incorporate a manual switch to toggle the electrostatic function on and off, accompanied by a visual indicator light to show when the electrostatic system is active.

• The paint gun shall feature fully functional fan adjustment and atomizing air adjustment valves.

2.2 Paint Storage Pot and Agitator:

• The system shall include a minimum 9.9-gallon steel paint pot tank assembly.

• The paint tank assembly shall include a lid designed to hold the pneumatic paint agitator/ mixer, complete with a regulator control system and a fluid pick-up tube.

• The paint pot shall be fully compatible with Commercial Off The Shelf (COTS) 10-gallon disposable pot liners.

2.3 Fluid Pump Requirements:

• The fluid pump shall be a genuine Graco President 30:1 pump.

• The pump shall possess a 30:1 ratio with a maximum fluid working pressure of 3,000 psi, a maximum air operating pressure of 100 psi, and a maximum flow of 1 gallon at 60 cycles/min.

• The pump shall be equipped with a 100-mesh fluid filter rated for 5,000 psi.

• The filter shall be constructed from carbon steel, PTFE, 304/316 stainless steel, and/or polyethylene.

2.4 Pneumatics, Hoses, and Connections:

• The system shall be designed for a 100 psi working pressure utilizing one central 1/2-inch male industrial interchange quick coupler.

• The primary airline shall split to supply air to the fluid agitator, paint gun, and fluid pump, with individual pressure regulators for each.

• The fluid agitator shall utilize a quick disconnect to attach to the airline.

• The system shall include a minimum 99-foot (100-foot nominal) grounded electrostatic air hose assembly featuring 1/4-inch ID swivel connections.

• The system shall include a minimum 99-foot (100-foot nominal) high-pressure, nylon-lined fluid hose assembly featuring 1/4-inch ID swivel connections.

• The system shall incorporate a 3-foot to 6-foot whip between the main air/fluid hoses and the paint gun.

• The paint gun shall connect to the airline via a quick disconnect, and the fluid line shall feature an isolation valve situated between the main fluid line and the whip..

2.5 Cart System and Grounding:

• The entire system shall be mounted on a painted mobile cart.

• Cart dimensions shall not exceed 34 inches in width, 44 inches in length, and 54 inches in height.

• The cart shall feature 4 no-flat tires: two non-swivel back tires (at least 15 inches in diameter) and two swivel-type front tires with locking brakes (at least 6 inches in diameter).

• The cart shall include a push handle, integrated hooks for hose transport, and a 100-foot grounding wire and clamp.

3. Operating Environment and Material Compatibility:

• The complete setup shall be FM-rated for use in Class I, Division I Hazardous locations using Group D materials, or be independently certified as intrinsically safe.

• All wetted fluid system parts shall be constructed of carbon steel, 304/316/420/17–4 pH stainless steel, chrome, chrome and zinc plating, tungsten carbide, or PTFE as required for chemical and wear resistance.

• All parts shall be rated for the appropriate operating pressures and be fully compatible with spraying MIL-PRF-23377 epoxy primers and MIL-PRF-85285 polyurethane topcoats.

• The system shall be rated for continuous operation in ambient temperatures from 40°F to 120°F.

4. CLIN 0002: STANDALONE ELECTROSTATIC SPRAY GUN

The vendor shall provide an individual spray gun meeting all of the following salient characteristics:

4.1 Electrostatic Paint Gun Requirements:

• The paint gun shall be a manual air-assisted airless electrostatic paint gun rated for 85kV (specifically genuine Graco H85T10 / Pro Xp85).

• The paint gun shall incorporate an internal power supply rated for 85 kV and feature a standard visual display.

• The paint gun shall operate autonomously without external electrical cords or a separate electrostatic control module.

• The paint gun shall feature a 1/4-inch left-handed male NPSM air inlet and a 1/4-inch male NPSM fluid inlet.

• The paint gun shall be rated to withstand a maximum fluid pressure of 3,000 psi, a maximum air pressure of 100 psi, and a maximum fluid temperature of 120°F.

• The paint gun shall be delivered equipped with a 613 spray tip.

• The paint gun shall incorporate a manual switch to toggle the electrostatic function on and off, accompanied by a visual indicator light to show when the electrostatic system is active.

• The paint gun shall feature fully functional fan adjustment and atomizing air adjustment valves.

4.2 Operating Environment and Material Compatibility:

• The paint gun shall be FM-rated for use in Class I, Division I Hazardous locations using Group D materials, or be independently certified as intrinsically safe.

• All wetted fluid system parts shall be constructed of carbon steel, 304/316/420/17–4 pH stainless steel, chrome, chrome and zinc plating, tungsten carbide, or PTFE as required for chemical and wear resistance.

• All parts shall be rated for the appropriate operating pressures and be fully compatible with spraying MIL-PRF-23377 epoxy primers and MIL-PRF-85285 polyurethane topcoats.

• The paint gun shall be rated for continuous operation in ambient temperature conditions ranging from 40°F to 120°F.

5.0 LOGISTICS (Applies to all CLINs)

• Documentation: Complete commercial Technical Manuals, Operating Instructions, and IPB required.

• Warranty: Minimum 1-year standard commercial warranty.

• FOB: Destination (Tinker AFB, OK).

• Delivery: 60 to 90 Days ARO for any order placed during any active Ordering

Period.

File details come from the government source that posted it. Updated .