Nitrogen Generator- Item Description- Rev01.pdf
PDF 103 KB Posted
- Attached to
- Nitrogen Generator Federal contract opportunity
- Solicitation number
- FA8125-26-Q-0018-0001
About this file
This document is an Item Description for a Nitrogen Generator issued by the Department of the Air Force at Oklahoma City Air Logistics Complex (OC-ALC), Tinker Air Force Base. The requirement is for one nitrogen generator specifically designed to supply nitrogen gas for inflating aircraft tires, with precise technical specifications including 95-99% nitrogen purity, membrane nitrogen production, and a maximum size of 6' x 3' x 6'. The generator must operate at 50-125°F, utilize 460V/60Hz/3 Phase electrical power, and include an integrated rotary screw air compressor, touchscreen HMI control panel, in-line oxygen analyzer, and emergency stop button. Additional requirements include dry, oil-less nitrogen output at 4000-5000 PSIG storage pressure, 300-500 PSIG output pressure, and a flow rate of 13-20 SCFM. The system will undergo acceptance testing by the Maintenance Support Group after installation at Tinker Air Force Base, and will include a standard one-year warranty and safety manual.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FA8125-26-Q-0018-0001.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
OKLAHOMA CITY AIR LOGISTICS COMPLEX (OC-ALC)
TINKER AIR FORCE BASE OKLAHOMA
Item Description
Nitrogen Generator
C26-005
76 CMXG is requesting a Nitrogen Generator. This requirement must have the following specifications:
Nitrogen generator that produces nitrogen gas of the following specifications:
One (1) each Nitrogen Generator
Purpose: supply nitrogen gas required for inflating aircraft tires.
Uses membrane nitrogen production
Nitrogen Purity: 95% - 99% (produces nitrogen gas limited to at most 5% oxygen impurities)- Target purity is 97%
Max Size: 6' x 3' x 6'
Max weight: 4,000 lbs
Quality of nitrogen: dry, oil-less
Storage pressure: 4000 - 5000 PSIG (Pounds per square inch gauge) Output pressure: 300 - 500 PSIG (Pounds per square inch gauge) Output flow: 13 - 20 SCFM (Standard cubic feet per minute)- Nominal SCFM is 15
SCFM.
Operating temperature: 50°F - 125°F
Electrical Utilities: 460V/60Hz/3 Phase
System must include a nitrogen generator/source, filtration, pressure regulation, and an in-line oxygen analyzer to continuously monitor nitrogen purity and alert upon exceeding specified O2 concentration levels.
Panel should utilize a touchscreen Human-Machine Interface (HMI) control panel with information and other readings on how the machine is operating that can be pulled up on said control panel. Include an Emergency Stop button on the same side of the machine that the control panel is located.
Utilizes a rotary screw air compressor” (this air compressor should be a component that is contained within the nitrogen generator, to prevent the need to use an external compressed air source)
Acceptance testing will be performed after installation is complete (installation that is completed by Maintenance Support Group) on base at Tinker.
Standard One Year Warranty and Safety Manual Included
File details come from the government source that posted it. Updated .