Flatbed_Trailers_Item_Description.docx

DOCX document 39 KB Posted

Attached to
Flatbed Kitting Trailers
Solicitation number
FA812519QA039
Issued by

About this file

Item Description

View the file

Other files

File Type Posted
Attachment_1_Flatbed_Trailer_Images.pdf PDF
Solicitation_-_FA812519QA039.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

DEPARTMENT OF THE AIR FORCE

OKLAHOMA CITY AIR LOGISTICS COMPLEX (OC-ALC)

TINKER AIR FORCE BASE OKLAHOMA

Item Description

Flatbed Kitting Trailers

76 AMXG is requesting the purchase of thirty (30) flatbed trailers. Attachment 1 shows photos of the current trailers being used for reference. Each trailer must meet the following specifications:

· Trailer Deck Dimension of 48” X 120”

· Deck contructed of 2x4 or 2x6 pressure treated lumber

· Lumber shall be held down with a steel lip around the parameter

· Front axle with 360 degrees of rotation with a greesable fitting (no suspension required)

· Fixed rear axle (no suspension required)

· Tow bar length from trailer shall be between 4ft and 4 ½ft

· Luna ring on tow bar

· Ring shall have 6” outside diameter and 3” inside diameter

· 15 Ton (welded) pintle hook with secure pin on rear of trailer

· Secure pin shall be connected to base of pintle hook hitch with cable or steel wire

· Trailers must be able to be towed in tandem

· Trailers shall have a steel frame

· Sandblasted and Powder Coated Safety Yellow or Bright Yellow

· Trailers must have at least a 1500lb load capacity

· Trailers must have Forklift Solid Pneumatic Tires, no less than 18" overall height

· Trailers must have 4 tie down points on each side and 2 per front and rear for a total of 12 points

· Tie down points shall be sized to accept a 2x4 piece of lumber

· Deck height shall be between 22” and 24” from the ground

· Trailers must have eight (8) pieces of 3”x5” white reflective tape (two on each side) evenly spaced

· Trailers should have six (6) Trailer Specification Plates installed in the following locations:

· Two (2) on each side, centered and evenly spaced

· One (1) on front, centered above pintle hook and One (1) centered on the rear

· Trailer Specification Plates must be stamped with the following:

· Load Capacity, Overall Length, Overall Width, Overall Height, Trailer Weight, Tire Size, Tire Pressure, Wheelbase and Max Operating Speed image1.wmf

File details come from the government source that posted it.