B-B1_Power_Pak_Item_Description_2.docx

DEPARTMENT OF THE AIR FORCE

OKLAHOMA CITY AIR LOGISTICS COMPLEX (OC-ALC)

TINKER AIR FORCE BASE OKLAHOMA

Commodity Item Description

B-B1 TCTP 1558 TASK 1B106 PULLER/POWER PAK

The 76 AMXG/567th AMXS request the purchase of support equipment to perform Time Compliance Technical Order (TCTO) 1558, Task 1B106 on the B-1B fleet Per TCTO 1558, and the part numbers listed have been provided by Fatigue Technology (FTI) however, equivalent equipment is acceptable per verbiage within the TCTO. The hose assemblies are to connect the Puller and PowerPak together.

One (1) Each (FTI) MB-30 Med-Puller or equal, with the following salient characteristics:

1 - Air-actuated, hydraulic puller which is capable of cold expanding holes up to 15/16-inch in diameter in aluminum and mild steel and up to 3/4-inch diameter in titanium and high strength steel.

2 - 24,000 lbs. maximum pull force 10,000 psi of hydraulic pressure.

3 - Shall include as a minimum a 10-foot hose assembly to connect to FT-200 Power-Pak.

4 - The MB-30 Puller must be compatible with FTI Medium Brute extension and flush nosecaps.

5 - The MB puller shall be directly compatible with standard Type 2 (5/8-18) threaded mandrels or may be used with Type 5 (7/8-14) threaded mandrels with the proper threaded adapter.

One (1) Each (FTI) FT-200D PowerPak or equal, with the following salient characteristics:

Characteristics for Power-Pak (FT-200).

1 - The FT-200 Power-Pak shall be air powered hydraulic unit that utilizes a hydraulic pump driven by an air motor to generate up to 10,000 psi of hydraulic pressure.

2 - The air motor shall be driven by compressed air at 90 to 120 psi.

3 - Wheels or casters shall be included for portability

One (1) Each (FTI) IWHH-20 Hose Assembly or Equal (20 Feet).

One (1) Each (FTI) IWHH-30 Hose Assembly or Equal. (30 Feet).

image1.wmf