Sources_Sought_Synopsis_MAG_1250.docx

MAG HORIZONTAL MACHINING CENTER SERVICES FOR OC-ALC

Tinker AFB, OK Agency: Department of the Air Force Office: Air Force Materiel Command (AFMC) Place of Performance: OC-ALC

Notice Type:

Sources Sought

Posted Date:

06 Nov 2015

Response Date:

13 Nov 2015; 1600 Hours Central Time

Archiving Policy:

Automatic, 15 days after response date

Archive Date:

29 Nov 2015

Classification Code:

"J049": Maintenance Repair/rebuild of equipment

NAICS Code:

811310: Maintenance Services

Synopsis:

1. Purpose: The purpose of this Sources Sought Synopsis is to identify sources interested in this requirement and capable of satisfying the scope of services as detailed below. The Government will use this information to determine the best future acquisition strategy for this procurement. Interested parties are advised to review the below notice, the attached documents and respond as instructed.

The Government is neither obligated to nor will it pay for any information received from potential sources as a result of this notice. This notice is for informational and planning purposes only and does not constitute a solicitation for bids or proposals. It is not to be construed as a commitment by the Government. All documents released prior to the formal RFP are in “DRAFT” status and are subject to change. The “DRAFT” documents are provided to give interested parties a better understanding of the scope and magnitude of this potential requirement.

The Government Contemplates the Following:

c. A one-time effort.

d. The estimated award date for this contract being in calendar year 2015.

Scope of Services:

The Contractor shall provide all labor, tools, equipment, test equipment, material, parts, quality control, transportation and inspection manuals necessary to perform the one-time test, tear down, evaluation and repair of two (2) Giddings and Lewis HMC-1250 5-Axis Horizontal Machining Centers on-base in Building 9001 and off-base if necessary for the Oklahoma City– Air Logistics Complex (OC-ALC). The Contractor shall also provide Personal Protective Equipment (PPE) and clothing, to include reflective clothing (belt, vest, etc.); hearing and eye protection, to include prescription safety glasses; safety harnesses; fall protection equipment;

lifting equipment and any incidentals necessary to perform the requirements of the Performance Work Statement (PWS). The equipment is listed in Appendix A (On-Base) and Attachment #1, Appendix B (Off-Base) which will be posted with the solicitation.

2. The North American Industry Classification System (NAICS) code for the effort is as follows:

811310: Maintenance Services.

3. Interested Parties Should:

a. Provide a corporate capabilities package to show whether your company is qualified to perform maintenance to include access to any required parts to the Giddens & Lewis HMC-1250. Additionally, state whether you are compliant with Tinker AFB procedures per Tinker AFB Instruction (TAFBI) 32-7004 Hazardous Materials Management.

b. State whether your company is a large or small business under NAICS 811310, which has a corresponding size standard of $7.5 M.

c. Identify any categories under which you are qualified [e.g., 8(a), including graduation date; HUB Zone-certified Small Business; Service-Disabled Veteran Owned Small Business; Women-Owned Small Business; etc.]

d. Identify your CAGE Code and DUNS Number.

e. State if your interest is to be the prime contractor or a subcontractor.

f. Provide your contact information (name, phone number, and email address)

4.

Contracting Office Address:

AFSC/PZIMA

3001 Staff Drive, Post 2S76 Tinker AFB, Oklahoma 73145-3015

Primary Point of Contact:

Geoffrey. Craigwell (geoffrey.craigwell@us.af.mil )

Secondary Point of Contact:

Steve C. Kimbrell (steven.kimbrell.1@us.af.mil)

Send all responses to the above POCs with the heading “MAG Horizontal Machining Center-1250 services for OC-ALC Sources Sought Response” image10.jpeg image1.jpeg