555911_ATTACH.pdf

A 20110831

AFMC IMT 762A, 20060201, V-1

REPAIR DATA LIST REMARKS

RDL REVISION

DATE

NSN

FURNISHED METHOD CODE LEGEND

C - CLASSIFIED DOCUMENT

S - FURNISHED WITH SOLICITATION

M - STABLE BASE DRAWING REQUIRED, FURNISHED WITH

CONTACT AWARD

X - TECHNICAL DATA FURNISHED WITH CONTRACT AWARD

R - FURNISHED BY PCO UPON REQUEST

P - PARTIAL

V - VENDOR DATA (Not Provided)

G - GOVT DOCUMENT

O - OTHER, CONTRACTOR MUST ACQUIRE

A - DATA NOT AVAILABLE

CAGE

CODE DOCUMENT REV

FURN

CODE

DATA

AVAIL

GOV

RIGHTS

DIST

CODE NOUN/TITLE REMARKS

2J-F100-24 Y Y O Illustrated Parts Breakdown

2-1-1-11 Y Y O P&W Standard Maintenance Procedure

2J-F100-9 Y Y O Nondestructive Inspection

2J-F100-13-2 Y Y O Maint Instr - Depot OCM

2J-F100-13-9 Y Y O Maint Instr - Depot LPT Module

4062252

PART NUMBER

77445

CAGE CODE

Rear Turbine Case

NOUN

PAGE 1OFREPAIR DATA LIST

2840-01-242-8335

AFMC IMT 762A, 20060201 (Reverse)

INSTRUCTIONS FOR COMPLETION OF THE RDL

HEADER INFORMATION

RDL Revision: Enter the revision of the RDL beginning with a dash for the basic. At the first revision (change) this should be entered as 01, the second; 02, etc…..

Date: Enter the date as YYYYMMDD Page: Enter the appropriate number of pages of the RDL NSN: Enter the complete National Stock Number (This will be the same NSN as block 3 of the AFMC Form 762).

Part Number: Enter the complete Part number. (This will be the same as block 4 of the AFMC Form 762).

Cage Code: Enter the Contractor and Government Entity Code of the part number entered in the Part Number block of the RDL (This will be the same as block 5 of the AFMC Form 762).

Noun: Enter the nomenclature of the NSN (This will be the same as block 6 of the AFMC Form 762).

BODY:

CAGE CODE: Enter the CAGE of the design activity's document which will be used for repair of the NSN (this will be found on the document title page or title block) Document: Enter the design activities document number, (i.e., T.O., TCTO, engineering drawing) or in cases where the document number is not applicable to the required product data, enter the Part or Identifying Number (PIN) which may be assigned for Gerber PCB Artwork data, Software data, 3-D model data, or other product data files". (This will be found on the title page or in the title block of the document) Rev: Enter the revision/change indicator of the document that will be used for repair of the output NSN (this may be found on the title page of the document) Furn Code: (Furnish Code) Select from the legends found in the Repair Data List Remarks on the bottom of the form.

Data Avail: (Availability of document) if the document is available and releasable to a potential repair offeror, indicate by marking Y for Yes or N for no.

Gov Rights: (Government Rights) indicate the government's rights to release the document to a potential repair offeror. U, for unlimited; L, for limited; P, for proprietary (documents may bear other rights codes, for guidance contact the technical data repository) Dist Code: (Distribution Code) enter the distribution code for the distribution statement marked on the document. The distribution statement and distribution code can usually be found on the title page of the document. Documents prior to 1984 may not be marked. Follow local technical data repository guidance to determine the appropriate code. Code definition and applicability are detailed in DoD Directive 5230.24.

Noun/Title: Enter the identifying noun or title of the document to be used for repair of the output NSN. This will be found on the title page or title block of the document.