PKGRQMT_REPORT.pdf
PDF 73 KB Posted
- Attached to
- TF33 1st Stage Fan Blades Federal contract opportunity
- Solicitation number
- FA8121-19-R-0011
About this file
This document contains packaging requirements and instructions for two items being procured by the Air Force Materiel Command Lifecycle Management Center located at Tinker Air Force Base. The items include 2840004399238RV and 2840DTH170082RV, which must be packaged and marked according to MIL-STD-2073-1 and MIL-STD-129 for preservation, shipping, and storage. Packaging is to include cushioning to prevent chipping and nicking, with a unit pack quantity of 7 weighing 6.3 inches by 6.3 inches by 18.5 inches. Additional requirements specify wood packaging be constructed from debarked, heat-treated wood certified by an accredited agency.
A separate federal contract opportunity posted is soliciting proposals for TF33 1st Stage Fan Blades to be used on TF33-P103 engines. Offerors must be qualified sources according to FAR 52.209-1, with submissions of Source Approved Requests encouraged early as the government may not review pending requests before award.
Packaging
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FA812119R0011_Amend01.pdf | ||
| PKGRQMT.pdf | ||
| TRNSPDATA.pdf | ||
| CDRLs.pdf | ||
| GFM_1.xlsx | XLSX spreadsheet | |
| DID_81995.pdf | ||
| DID_81832.pdf | ||
| DID_81838.pdf | ||
| DID_81535A.pdf | ||
| CDRLs.pdf | ||
| CAVAF_Reporting.pdf | ||
| RQR-PSD-1.pdf | ||
| DID_80441C.pdf | ||
| FA812119R0011.pdf | ||
| TRNSPDATA_REPORT.pdf | ||
| DID_80503.pdf | ||
| WD2015_4563_rev_no_10.pdf | ||
| PWS.pdf |
Show all 18
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PACKAGING REQUIREMENTS
PURCHASE INSTRUMENT NUMBER: FD20301800004-05 VERSION: 2
MIL-STD 129 REVISION: R MIL-STD 2073-1 REVISION: E
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES). WOODEN LUMBER, WOODEN
PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLET'S, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES" (ISPM)NO.15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
PACRN: PACKAGING REQUIREMENT: PRESERVATION LEVEL: PACKAGING LEVEL: SPI: SPI REV: SPI DATE:
AAB MIL Long Line Packaging MIL B
ITEM(S):
2840004399238RV 2840DTH170082RV
CODED DATA:
QUP ICQ
PRES
METH CD
PRES
MTL
WRAP
MTL
CUSH
DUNN CT
UNIT
CONT
INT
CONT UCL
SPEC
MKG
UNIT PACK
WEIGHT
UNIT PACK
LENGTH
UNIT PACK
WIDTH
UNIT PACK
DEPTH
UNIT PACK
CUBE OPI
1 AAA 10 1 00 ZZ JC A ED ED B 00 7.00 6.3 6.3 18.5 0.424 O
ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS:
SUPPLEMENTAL PACKAGING INSTRUCTION TEXT:
SET OF 2 "WRAP WITH NA CUSHION TO PREVENT CHIPPING/NICKING"
VENDOR PACKAGING INSTRUCTIONS:
Military Packaging and Marking Items shall be packaged in accordance with MIL-STD-2073-1, Standard Practice for Military Packaging. Shipping and storage markings shall be in accordance with MIL-STD-129, Standard Practice for Military Marking.
Shipping Container Marking Shipping containers shall be marked meeting the following criteria: (a) MIL-STD-129, Standard Practice for Military Marking. (b) Additional marking and/or bar coding requirements exceeding those of MIL-STD-129 (e.g., unit serial numbers, original equipment manufacturers (OEM) name, or OEM model number, as specified on the AFMC Form 158.
ORGANIZATION / OFFICE SYMBOL:
406 SCMS / GULAA
PACKAGING SPECIALIST:
Villarma, Gary D
PHONE NUMBER:
405-582-9771 / 852-9771
SIGNATURE:
//SIGNED//Villarma, Gary D
DATE:
19129 - 09 MAY 2019
Page 1 of 1AFMC 158 Version 2Generated by PRPS using Jasper Reports on 16 May 2019
File details come from the government source that posted it. Updated .